Skip to contentSkip to conversation

: PM: Print hibernation/thaw progress indicator one line at a time

PATCH In review Bojan Smojver 2 participants 3 messages Jun 19, 2012 – Jun 21, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 : PM: Print hibernation/thaw progress indicator one line at a time

Hi Rafael,

Here is the final version of the patch, with your latest suggestion implemented.

------------------------------
PM: Print hibernation/thaw progress indicator one line at a time.

With the introduction of suspend to both into in-kernel hibernation code, dmesg was getting polluted with backspace characters printed as part of image saving progress indicator. This patch introduces printing of progress indicator on image save/load every 10% and one line at a time. As an additional benefit, all other messages emitted by the kernel during hibernation/thaw should now print cleanly as well.

---
 kernel/power/swap.c |   54 +++++++++++++++++++++++++--------------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
kernel/power/swap.c +27 -27
index 11e22c0..948f0d2 100644
@@ -448,9 +448,9 @@ static int save_image(struct swap_map_handle *handle,
 	struct timeval start;
 	struct timeval stop;
 
-	printk(KERN_INFO "PM: Saving image data pages (%u pages) ...     ",
+	printk(KERN_INFO "PM: Saving image data pages (%u pages)...\n",
 		nr_to_write);
-	m = nr_to_write / 100;
+	m = nr_to_write / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -464,7 +464,8 @@ static int save_image(struct swap_map_handle *handle,
 		if (ret)
 			break;
 		if (!(nr_pages % m))
-			printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m);
+			printk(KERN_INFO "PM: Image saving progress: %3d%%\n",
+			       nr_pages / m * 10);
 		nr_pages++;
 	}
 	err2 = hib_wait_on_bio_chain(&bio);
@@ -472,9 +473,7 @@ static int save_image(struct swap_map_handle *handle,
 	if (!ret)
 		ret = err2;
 	if (!ret)
-		printk(KERN_CONT "\b\b\b\bdone\n");
-	else
-		printk(KERN_CONT "\n");
+		printk(KERN_INFO "PM: Image saving done.\n");
 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
 	return ret;
 }
@@ -668,9 +667,9 @@ static int save_image_lzo(struct swap_map_handle *handle,
 
 	printk(KERN_INFO
 		"PM: Using %u thread(s) for compression.\n"
-		"PM: Compressing and saving image data (%u pages) ...     ",
+		"PM: Compressing and saving image data (%u pages)...\n",
 		nr_threads, nr_to_write);
-	m = nr_to_write / 100;
+	m = nr_to_write / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -690,8 +689,10 @@ static int save_image_lzo(struct swap_map_handle *handle,
 				       data_of(*snapshot), PAGE_SIZE);
 
 				if (!(nr_pages % m))
-					printk(KERN_CONT "\b\b\b\b%3d%%",
-				               nr_pages / m);
+					printk(KERN_INFO
+					       "PM: Image saving progress: "
+					       "%3d%%\n",
+				               nr_pages / m * 10);
 				nr_pages++;
 			}
 			if (!off)
@@ -761,11 +762,8 @@ out_finish:
 	do_gettimeofday(&stop);
 	if (!ret)
 		ret = err2;
-	if (!ret) {
-		printk(KERN_CONT "\b\b\b\bdone\n");
-	} else {
-		printk(KERN_CONT "\n");
-	}
+	if (!ret)
+		printk(KERN_INFO "PM: Image saving done.\n");
 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
 out_clean:
 	if (crc) {
@@ -973,9 +971,9 @@ static int load_image(struct swap_map_handle *handle,
 	int err2;
 	unsigned nr_pages;
 
-	printk(KERN_INFO "PM: Loading image data pages (%u pages) ...     ",
+	printk(KERN_INFO "PM: Loading image data pages (%u pages)...\n",
 		nr_to_read);
-	m = nr_to_read / 100;
+	m = nr_to_read / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -993,7 +991,8 @@ static int load_image(struct swap_map_handle *handle,
 		if (ret)
 			break;
 		if (!(nr_pages % m))
-			printk("\b\b\b\b%3d%%", nr_pages / m);
+			printk(KERN_INFO "PM: Image loading progress: %3d%%\n",
+			       nr_pages / m * 10);
 		nr_pages++;
 	}
 	err2 = hib_wait_on_bio_chain(&bio);
@@ -1001,12 +1000,11 @@ static int load_image(struct swap_map_handle *handle,
 	if (!ret)
 		ret = err2;
 	if (!ret) {
-		printk("\b\b\b\bdone\n");
+		printk(KERN_INFO "PM: Image loading done.\n");
 		snapshot_write_finalize(snapshot);
 		if (!snapshot_image_loaded(snapshot))
 			ret = -ENODATA;
-	} else
-		printk("\n");
+	}
 	swsusp_show_speed(&start, &stop, nr_to_read, "Read");
 	return ret;
 }
@@ -1185,9 +1183,9 @@ static int load_image_lzo(struct swap_map_handle *handle,
 
 	printk(KERN_INFO
 		"PM: Using %u thread(s) for decompression.\n"
-		"PM: Loading and decompressing image data (%u pages) ...     ",
+		"PM: Loading and decompressing image data (%u pages)...\n",
 		nr_threads, nr_to_read);
-	m = nr_to_read / 100;
+	m = nr_to_read / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -1319,7 +1317,10 @@ static int load_image_lzo(struct swap_map_handle *handle,
 				       data[thr].unc + off, PAGE_SIZE);
 
 				if (!(nr_pages % m))
-					printk("\b\b\b\b%3d%%", nr_pages / m);
+					printk(KERN_INFO
+					       "PM: Image loading progress: "
+					       "%3d%%\n",
+					       nr_pages / m * 10);
 				nr_pages++;
 
 				ret = snapshot_write_next(snapshot);
@@ -1344,7 +1345,7 @@ out_finish:
 	}
 	do_gettimeofday(&stop);
 	if (!ret) {
-		printk("\b\b\b\bdone\n");
+		printk(KERN_INFO "PM: Image loading done.\n");
 		snapshot_write_finalize(snapshot);
 		if (!snapshot_image_loaded(snapshot))
 			ret = -ENODATA;
@@ -1357,8 +1358,7 @@ out_finish:
 				}
 			}
 		}
-	} else
-		printk("\n");
+	}
 	swsusp_show_speed(&start, &stop, nr_to_read, "Read");
 out_clean:
 	for (i = 0; i < ring_size; i++)

------------------------------

Signature · 1 line
Bojan
#1 lore raw
Quoted 8 lines · Bojan Smojver

Hi Rafael,

Here is the final version of the patch, with your latest suggestion implemented.

------------------------------
PM: Print hibernation/thaw progress indicator one line at a time.

Quoted 8 lines

With the introduction of suspend to both into in-kernel hibernation code, dmesg was getting polluted with backspace characters printed as part of image saving progress indicator. This patch introduces printing of progress indicator on image save/load every 10% and one line at a time. As an additional benefit, all other messages emitted by the kernel during hibernation/thaw should now print cleanly as well.

Thanks, queued up for 3.6 in linux-pm/linux-next.

Rafael

Quoted 163 lines
---
 kernel/power/swap.c |   54 +++++++++++++++++++++++++--------------------------
 1 file changed, 27 insertions(+), 27 deletions(-)
kernel/power/swap.c +27 -28
index 11e22c0..948f0d2 100644
@@ -448,9 +448,9 @@ static int save_image(struct swap_map_handle *handle,
 	struct timeval start;
 	struct timeval stop;
 
-	printk(KERN_INFO "PM: Saving image data pages (%u pages) ...     ",
+	printk(KERN_INFO "PM: Saving image data pages (%u pages)...\n",
 		nr_to_write);
-	m = nr_to_write / 100;
+	m = nr_to_write / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -464,7 +464,8 @@ static int save_image(struct swap_map_handle *handle,
 		if (ret)
 			break;
 		if (!(nr_pages % m))
-			printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m);
+			printk(KERN_INFO "PM: Image saving progress: %3d%%\n",
+			       nr_pages / m * 10);
 		nr_pages++;
 	}
 	err2 = hib_wait_on_bio_chain(&bio);
@@ -472,9 +473,7 @@ static int save_image(struct swap_map_handle *handle,
 	if (!ret)
 		ret = err2;
 	if (!ret)
-		printk(KERN_CONT "\b\b\b\bdone\n");
-	else
-		printk(KERN_CONT "\n");
+		printk(KERN_INFO "PM: Image saving done.\n");
 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
 	return ret;
 }
@@ -668,9 +667,9 @@ static int save_image_lzo(struct swap_map_handle *handle,
 
 	printk(KERN_INFO
 		"PM: Using %u thread(s) for compression.\n"
-		"PM: Compressing and saving image data (%u pages) ...     ",
+		"PM: Compressing and saving image data (%u pages)...\n",
 		nr_threads, nr_to_write);
-	m = nr_to_write / 100;
+	m = nr_to_write / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -690,8 +689,10 @@ static int save_image_lzo(struct swap_map_handle *handle,
 				       data_of(*snapshot), PAGE_SIZE);
 
 				if (!(nr_pages % m))
-					printk(KERN_CONT "\b\b\b\b%3d%%",
-				               nr_pages / m);
+					printk(KERN_INFO
+					       "PM: Image saving progress: "
+					       "%3d%%\n",
+				               nr_pages / m * 10);
 				nr_pages++;
 			}
 			if (!off)
@@ -761,11 +762,8 @@ out_finish:
 	do_gettimeofday(&stop);
 	if (!ret)
 		ret = err2;
-	if (!ret) {
-		printk(KERN_CONT "\b\b\b\bdone\n");
-	} else {
-		printk(KERN_CONT "\n");
-	}
+	if (!ret)
+		printk(KERN_INFO "PM: Image saving done.\n");
 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
 out_clean:
 	if (crc) {
@@ -973,9 +971,9 @@ static int load_image(struct swap_map_handle *handle,
 	int err2;
 	unsigned nr_pages;
 
-	printk(KERN_INFO "PM: Loading image data pages (%u pages) ...     ",
+	printk(KERN_INFO "PM: Loading image data pages (%u pages)...\n",
 		nr_to_read);
-	m = nr_to_read / 100;
+	m = nr_to_read / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -993,7 +991,8 @@ static int load_image(struct swap_map_handle *handle,
 		if (ret)
 			break;
 		if (!(nr_pages % m))
-			printk("\b\b\b\b%3d%%", nr_pages / m);
+			printk(KERN_INFO "PM: Image loading progress: %3d%%\n",
+			       nr_pages / m * 10);
 		nr_pages++;
 	}
 	err2 = hib_wait_on_bio_chain(&bio);
@@ -1001,12 +1000,11 @@ static int load_image(struct swap_map_handle *handle,
 	if (!ret)
 		ret = err2;
 	if (!ret) {
-		printk("\b\b\b\bdone\n");
+		printk(KERN_INFO "PM: Image loading done.\n");
 		snapshot_write_finalize(snapshot);
 		if (!snapshot_image_loaded(snapshot))
 			ret = -ENODATA;
-	} else
-		printk("\n");
+	}
 	swsusp_show_speed(&start, &stop, nr_to_read, "Read");
 	return ret;
 }
@@ -1185,9 +1183,9 @@ static int load_image_lzo(struct swap_map_handle *handle,
 
 	printk(KERN_INFO
 		"PM: Using %u thread(s) for decompression.\n"
-		"PM: Loading and decompressing image data (%u pages) ...     ",
+		"PM: Loading and decompressing image data (%u pages)...\n",
 		nr_threads, nr_to_read);
-	m = nr_to_read / 100;
+	m = nr_to_read / 10;
 	if (!m)
 		m = 1;
 	nr_pages = 0;
@@ -1319,7 +1317,10 @@ static int load_image_lzo(struct swap_map_handle *handle,
 				       data[thr].unc + off, PAGE_SIZE);
 
 				if (!(nr_pages % m))
-					printk("\b\b\b\b%3d%%", nr_pages / m);
+					printk(KERN_INFO
+					       "PM: Image loading progress: "
+					       "%3d%%\n",
+					       nr_pages / m * 10);
 				nr_pages++;
 
 				ret = snapshot_write_next(snapshot);
@@ -1344,7 +1345,7 @@ out_finish:
 	}
 	do_gettimeofday(&stop);
 	if (!ret) {
-		printk("\b\b\b\bdone\n");
+		printk(KERN_INFO "PM: Image loading done.\n");
 		snapshot_write_finalize(snapshot);
 		if (!snapshot_image_loaded(snapshot))
 			ret = -ENODATA;
@@ -1357,8 +1358,7 @@ out_finish:
 				}
 			}
 		}
-	} else
-		printk("\n");
+	}
 	swsusp_show_speed(&start, &stop, nr_to_read, "Read");
 out_clean:
 	for (i = 0; i < ring_size; i++)
------------------------------
#2 lore raw
Quoted 1 line · Rafael J. Wysocki

Thanks, queued up for 3.6 in linux-pm/linux-next.

Excellent, thanks.

Signature · 1 line
Bojan