Skip to contentSkip to conversation

regulator: tps62360: Convert to devm_gpio_request_one

PATCH In review Axel Lin 3 participants 4 messages Jul 7, 2012 – Jul 15, 2012 Voltage and current regulator framework

lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: tps62360: Convert to devm_gpio_request_one

Use devm_gpio_request_one to save a few error handling code. Also remove trivial comment for tps62360_remove.

---
 drivers/regulator/tps62360-regulator.c |   38 +++++++-------------------------
 1 file changed, 8 insertions(+), 30 deletions(-)
drivers/regulator/tps62360-regulator.c +8 -30
index 103bb62..062a9cf 100644
@@ -428,24 +428,24 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 		int gpio_flags;
 		gpio_flags = (pdata->vsel0_def_state) ?
 				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-		ret = gpio_request_one(tps->vsel0_gpio,
-				gpio_flags, "tps62360-vsel0");
+		ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio,
+					    gpio_flags, "tps62360-vsel0");
 		if (ret) {
 			dev_err(&client->dev,
 				"%s(): Could not obtain vsel0 GPIO %d: %d\n",
 				__func__, tps->vsel0_gpio, ret);
-			goto err_gpio0;
+			return ret;
 		}
 
 		gpio_flags = (pdata->vsel1_def_state) ?
 				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-		ret = gpio_request_one(tps->vsel1_gpio,
-				gpio_flags, "tps62360-vsel1");
+		ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio,
+					    gpio_flags, "tps62360-vsel1");
 		if (ret) {
 			dev_err(&client->dev,
 				"%s(): Could not obtain vsel1 GPIO %d: %d\n",
 				__func__, tps->vsel1_gpio, ret);
-			goto err_gpio1;
+			return ret;
 		}
 		tps->valid_gpios = true;
 
@@ -463,7 +463,7 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 	if (ret < 0) {
 		dev_err(tps->dev, "%s(): Init failed with err = %d\n",
 				__func__, ret);
-		goto err_init;
+		return ret;
 	}
 
 	config.dev = &client->dev;
@@ -477,39 +477,17 @@ static int __devinit tps62360_probe(struct i2c_client *client,
 		dev_err(tps->dev,
 			"%s(): regulator register failed with err %s\n",
 			__func__, id->name);
-		ret = PTR_ERR(rdev);
-		goto err_init;
+		return PTR_ERR(rdev);
 	}
 
 	tps->rdev = rdev;
 	return 0;
-
-err_init:
-	if (gpio_is_valid(tps->vsel1_gpio))
-		gpio_free(tps->vsel1_gpio);
-err_gpio1:
-	if (gpio_is_valid(tps->vsel0_gpio))
-		gpio_free(tps->vsel0_gpio);
-err_gpio0:
-	return ret;
 }
 
-/**
- * tps62360_remove - tps62360 driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister TPS driver as an i2c client device driver
- */
 static int __devexit tps62360_remove(struct i2c_client *client)
 {
 	struct tps62360_chip *tps = i2c_get_clientdata(client);
 
-	if (gpio_is_valid(tps->vsel1_gpio))
-		gpio_free(tps->vsel1_gpio);
-
-	if (gpio_is_valid(tps->vsel0_gpio))
-		gpio_free(tps->vsel0_gpio);
-
 	regulator_unregister(tps->rdev);
 	return 0;
 }
Signature · 1 line
1.7.9.5
#2 lore raw
In reply to Axel Lin
Quoted 2 lines · Axel Lin

Use devm_gpio_request_one to save a few error handling code. Also remove trivial comment for tps62360_remove.

I can't apply any of these patches until devm_gpio_request_one() is exported in mainline.

#3 lore raw
In reply to Axel Lin
Quoted 2 lines · Axel Lin

Use devm_gpio_request_one to save a few error handling code. Also remove trivial comment for tps62360_remove.

I applied Laxman's earlier version of this.