Skip to contentSkip to conversation

fusion: print lan address via %pMR

PATCH In review Andy Shevchenko 1 participant 2 messages Jul 12, 2012 – May 28, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fusion: print lan address via %pMR

---
 drivers/message/fusion/mptbase.c |   14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/message/fusion/mptbase.c +4 -10
index d99db56..d202f25 100644
@@ -2562,10 +2562,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 				(void) GetLanConfigPages(ioc);
 				a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
 				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-					"LanAddr = %02X:%02X:%02X"
-					":%02X:%02X:%02X\n",
-					ioc->name, a[5], a[4],
-					a[3], a[2], a[1], a[0]));
+					"LanAddr = %pMR\n", ioc->name, a));
 			}
 			break;
 
@@ -6785,8 +6782,7 @@ static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
 		if (ioc->bus_type == FC) {
 			if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
 				u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-				seq_printf(m, "    LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-						a[5], a[4], a[3], a[2], a[1], a[0]);
+				seq_printf(m, "    LanAddr = %pMR\n", a);
 			}
 			seq_printf(m, "    WWN = %08X%08X:%08X%08X\n",
 					ioc->fc_port_page0[p].WWNN.High,
@@ -6863,8 +6859,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 
 	if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
 		u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-		y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
-			a[5], a[4], a[3], a[2], a[1], a[0]);
+		y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
 	}
 
 	y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
@@ -6897,8 +6892,7 @@ static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int
 
 	if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
 		u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-		seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
-			a[5], a[4], a[3], a[2], a[1], a[0]);
+		seq_printf(m, ", LanAddr=%pMR", a);
 	}
 
 	seq_printf(m, ", IRQ=%d", ioc->pci_irq);
Signature · 1 line
1.7.10.4
#1 lore raw
Quoted 42 lines · Andy Shevchenko
---
 drivers/message/fusion/mptbase.c |   14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)
drivers/message/fusion/mptbase.c +3 -8
index d99db56..d202f25 100644
@@ -2562,10 +2562,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 				(void) GetLanConfigPages(ioc);
 				a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
 				dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
-					"LanAddr = %02X:%02X:%02X"
-					":%02X:%02X:%02X\n",
-					ioc->name, a[5], a[4],
-					a[3], a[2], a[1], a[0]));
+					"LanAddr = %pMR\n", ioc->name, a));
 			}
 			break;
 
@@ -6785,8 +6782,7 @@ static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
 		if (ioc->bus_type == FC) {
 			if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
 				u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-				seq_printf(m, "    LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
-						a[5], a[4], a[3], a[2], a[1], a[0]);
+				seq_printf(m, "    LanAddr = %pMR\n", a);
 			}
 			seq_printf(m, "    WWN = %08X%08X:%08X%08X\n",
 					ioc->fc_port_page0[p].WWNN.High,
@@ -6863,8 +6859,7 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
 
 	if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
 		u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-		y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
-			a[5], a[4], a[3], a[2], a[1], a[0]);
+		y += sprintf(buffer+len+y, ", LanAddr=%pMR", a);
 	}
 
 	y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);

drivers/message/fusion/mptbase.c static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int · line 6898

Quoted 9 lines
drivers/message/fusion/mptbase.c +1 -2
@@ -6897,8 +6892,7 @@ static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int
 
 	if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
 		u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
-		seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
-			a[5], a[4], a[3], a[2], a[1], a[0]);
+		seq_printf(m, ", LanAddr=%pMR", a);
 	}
 
 	seq_printf(m, ", IRQ=%d", ioc->pci_irq);

James, do you have any comments on this one?

Signature · 2 lines
Andy Shevchenko <[email protected]>
Intel Finland Oy