gpsd: fix qt build problem
PATCH 1/1 gpsd: fix qt build problem
From: Simon Dawson <[email protected]>
When gpsd is configured with Qt bindings enabled, the build falls over because the Qt headers are not found.
A representative build log can be seen at
http://autobuild.buildroot.org/results/c76888749337788c9ae9a04499f1fc1e1c5a2e81/build-end.log
This patch sets CFLAGS in the environment, so that the headers are found.
--- package/gpsd/gpsd.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
package/gpsd/gpsd.mk +2 -1
@@ -12,6 +12,7 @@ GPSD_INSTALL_STAGING = YES GPSD_DEPENDENCIES = host-scons GPSD_LDFLAGS = $(TARGET_LDFLAGS) +GPSD_CFLAGS = $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -I$(STAGING_DIR)/usr/include/QtCore -I$(STAGING_DIR)/usr/include/QtNetwork GPSD_SCONS_ENV = $(TARGET_CONFIGURE_OPTS)
@@ -198,7 +199,7 @@ ifeq ($(BR2_PACKAGE_GPSD_MAX_DEV),y) GPSD_SCONS_OPTS += limited_max_devices=$(BR2_PACKAGE_GPSD_MAX_DEV_VALUE) endif -GPSD_SCONS_ENV += LDFLAGS="$(GPSD_LDFLAGS)" +GPSD_SCONS_ENV += LDFLAGS="$(GPSD_LDFLAGS)" CFLAGS="$(GPSD_CFLAGS)" define GPSD_BUILD_CMDS (cd $(@D); \
Signature · 1 line
1.7.9.5
PATCH 1/1 gpsd: fix qt build problem
Le Tue, 24 Jul 2012 21:29:09 +0100,
spdawson at gmail.com a ?crit :
Quoted 2 lines
GPSD_LDFLAGS= $(TARGET_LDFLAGS)
+GPSD_CFLAGS = $(TARGET_CFLAGS) -I$(STAGING_DIR)/usr/include -I$(STAGING_DIR)/usr/include/QtCore -I$(STAGING_DIR)/usr/include/QtNetwork
I'm sorry but no, this is not the right way of fixing it. The QtCore and QtNetwork header paths are already on the build command line. It's just that they are wrong because they have two times the sysroot location:
/home/test/outputs/gpsd/host/usr/bin/arm-linux-gnueabi-g++ -o gpsutils-qt.os -c -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE -Wextra -Wall -Wno-uninitialized -Wno-missing-field-initializers -Wcast-align -Wmissing-declarations -Wpointer-arith -Wreturn-type -O2 -fPIC -DUSE_QT -DQT_SHARED -I/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/include -I/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/include/QtNetwork -I/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/include/QtCore gpsutils.c gpsutils.c:26:21: fatal error: QDateTime: No such file or directory
compilation terminated.
See
the /home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/home/test/outputs/gpsd/host/usr/arm-unknown-linux-gnueabi/sysroot/usr/include/QtCore path. The problem is in the directory arguments passed to Scons.
Best regards,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 gpsd: fix qt build problem
Quoted 4 lines · Thomas Petazzoni
I'm sorry but no, this is not the right way of fixing it. The QtCore and QtNetwork header paths are already on the build command line. It's just that they are wrong because they have two times the sysroot location:
Yes, agreed. Thanks for the feedback. (I see that you have now submitted patches to fix this properly.)
Simon.
PATCH 1/1 gpsd: fix qt build problem
Le Wed, 25 Jul 2012 07:42:58 +0100,
Simon Dawson <[email protected]> a ?crit :
Quoted 9 lines
Quoted 4 lines · Thomas Petazzoni
I'm sorry but no, this is not the right way of fixing it. The QtCore and QtNetwork header paths are already on the build command line. It's just that they are wrong because they have two times the sysroot location:
Yes, agreed. Thanks for the feedback. (I see that you have now submitted patches to fix this properly.)
Well, in fact the problem was not in the arguments passed to scons, but in the .pc files installed by Qt. They contained the full sysroot location, while they are not supposed to, so when our special pkg-config prefixed the locations coming from Qt .pc files by the sysroot again, we had a wrong path.
I wish I didn't had to do this horrible SED'ing of Qt .pc files after their installation, but unfortunately, the Qt build system handling of paths is non-standard and it's really not trivial to get something that builds, installs in the right place, and has the right prefix.
Best regards,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 gpsd: fix qt build problem
Quoted 4 lines · Thomas Petazzoni
I wish I didn't had to do this horrible SED'ing of Qt .pc files after their installation, but unfortunately, the Qt build system handling of paths is non-standard and it's really not trivial to get something that builds, installs in the right place, and has the right prefix.
Sure. It might not be the prettiest of fixes, but it's still a good
find: no doubt this would have caused a problem sooner or later, regardless of the gpsd issues.
Simon.