Is the CIL project still active
I'm only planning to run this in the same way as checkpolicy so not worried about AOSP etc.
I'm using the most suitable CIL statements (block, macro etc.), but as the policy is limited, not that many. I've converted all modules to blocks, figured out the classmap/classmapping statements and almost finished, although I'll probably wait for the next CIL release as I have come across three minor problems:
1) Cannot call a macro within a booleanif block.
2) The mlsconstrain statements seem to be generated in reverse order but need to check manually as APOL etc doesn't handle them. Are there any utilities that will allow me to compare mlsconstrain statements within a binary policy?
3) Cannot generate a file context without at least one category (example always wants s0:c0-s0:c0 instead of the normal s0).
Otherwise the current CIL compiler is running well.
Richard
Quoted 91 lines · Joshua Brindle
From: Joshua Brindle <[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines" <[email protected]>
Cc: [email protected], "Jeremy Solt" <[email protected]>, [email protected]
Date: Tuesday, 24 July, 2012, 13:29Quoted 1 line · Richard Haines
Glad to hear its still going as I started converting
the Android
Quoted 1 line
policy to CIL using the current compiler that works ok
so far. However
Quoted 1 line
I'm having problems defining 'sets of classes' for
example with M4:
Since it is a small policy it should be possible to do a real, semantic
conversion (using blocks and ignoring legacy file types). Is that what
you are doing?However, I'm not sure if CIL will be able to be in Android anytime soon.
It could still be used on the host side like checkpolicy/libsepol are
now but since CIL is currently statically linked against libsepol (GPL)
it would be prohibited in the AOSP userspace IIUC.Quoted 2 lines
define(`dir_file_class_set (dir file
lnk_filesock_file
fifo_fileQuoted 3 lines
chr_fileblk_file))I've tried various methods using classmap/classmapping
etc. but failed
Quoted 3 lines
to work out how to define in CIL:
mlsconstrain
dir_file_class_set{ create relabelfromrelabelto }
Quoted 3 lines
(l2 eq h2 and (l1 eq l2 or t1 == mlstrustedsubject));
I can produce CIL mlsconstrain statements when I define
them with each
Quoted 1 line
class separately but not as a set. Is it possible with
the current
Quoted 1 line
release of CIL ? (if not I'll just produce an entry for
each class so
Quoted 7 lines
I can continue).
Thanks
Richard--- On Fri, 20/7/12, James Carter<[email protected]>
Quoted 9 lines · wrote:
Quoted 9 lines
From: James Carter<[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines"<[email protected]>
Cc: [email protected]
Date: Friday, 20 July, 2012, 20:13Quoted 1 line · Richard Haines
Does anyone know the status of the CIL project
as it
Quoted 3 lines
Quoted 3 lines
looked useful and would seem ideal for SEAndroid.
There are still a few more bugs that need to be
fixed so
Quoted 2 lines
Quoted 2 lines
that it can
correctly compile a CIL-transformed Refpolicy.Progress has
Quoted 10 lines
Quoted 8 lines
been slow
recently, but it is not going to be abandoned.--
James Carter<[email protected]>
National Security AgencyQuoted 2 lines
--
This message was distributed to subscribers of theselinux mailing list.
Quoted 2 lines
If you no longer wish to subscribe, send mail to
[email protected]with
Quoted 1 line
the words "unsubscribe selinux" without quotes as the
message.
Quoted 1 line
Quoted 8 lines
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Quoted 11 lines · Richard Haines
I'm only planning to run this in the same way as checkpolicy so not worried about AOSP etc.
I'm using the most suitable CIL statements (block, macro etc.), but as the policy is limited, not that many. I've converted all modules to blocks, figured out the classmap/classmapping statements and almost finished, although I'll probably wait for the next CIL release as I have come across three minor problems:
1) Cannot call a macro within a booleanif block.
That has been fixed at some point since the last release.
Quoted 2 lines
2) The mlsconstrain statements seem to be generated in reverse order but need to check manually as APOL etc doesn't handle them.
Generated in the binary in reverse order? I don't understand what you are referring to here.
Quoted 4 lines
Are there any
utilities that will allow me to compare mlsconstrain statements within a binary policy?
sediff doesn't handle constraints and I don't know of a tool that will do that comparison.
Quoted 3 lines
3) Cannot generate a file context without at least one category (example always wants s0:c0-s0:c0 instead of the normal s0).
This does need to be fixed.
Quoted 2 lines
Otherwise the current CIL compiler is running well.
Thanks for your feedback.
Jim
Quoted 111 lines
Richard
Quoted 91 lines · Joshua Brindle
From: Joshua Brindle <[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines" <[email protected]>
Cc: [email protected], "Jeremy Solt" <[email protected]>, [email protected]
Date: Tuesday, 24 July, 2012, 13:29Quoted 1 line · Richard Haines
Glad to hear its still going as I started converting
the Android
Quoted 1 line
policy to CIL using the current compiler that works ok
so far. However
Quoted 1 line
I'm having problems defining 'sets of classes' for
example with M4:
Since it is a small policy it should be possible to do a real, semantic
conversion (using blocks and ignoring legacy file types). Is that what
you are doing?However, I'm not sure if CIL will be able to be in Android anytime soon.
It could still be used on the host side like checkpolicy/libsepol are
now but since CIL is currently statically linked against libsepol (GPL)
it would be prohibited in the AOSP userspace IIUC.Quoted 2 lines
define(`dir_file_class_set (dir file
lnk_filesock_file
fifo_fileQuoted 3 lines
chr_fileblk_file))I've tried various methods using classmap/classmapping
etc. but failed
Quoted 3 lines
to work out how to define in CIL:
mlsconstrain
dir_file_class_set{ create relabelfromrelabelto }
Quoted 3 lines
(l2 eq h2 and (l1 eq l2 or t1 == mlstrustedsubject));
I can produce CIL mlsconstrain statements when I define
them with each
Quoted 1 line
class separately but not as a set. Is it possible with
the current
Quoted 1 line
release of CIL ? (if not I'll just produce an entry for
each class so
Quoted 7 lines
I can continue).
Thanks
Richard--- On Fri, 20/7/12, James Carter<[email protected]>
Quoted 9 lines · wrote:
Quoted 9 lines
From: James Carter<[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines"<[email protected]>
Cc: [email protected]
Date: Friday, 20 July, 2012, 20:13Quoted 1 line · Richard Haines
Does anyone know the status of the CIL project
as it
Quoted 3 lines
Quoted 3 lines
looked useful and would seem ideal for SEAndroid.
There are still a few more bugs that need to be
fixed so
Quoted 2 lines
Quoted 2 lines
that it can
correctly compile a CIL-transformed Refpolicy.Progress has
Quoted 10 lines
Quoted 8 lines
been slow
recently, but it is not going to be abandoned.--
James Carter<[email protected]>
National Security AgencyQuoted 2 lines
--
This message was distributed to subscribers of theselinux mailing list.
Quoted 2 lines
If you no longer wish to subscribe, send mail to
[email protected]with
Quoted 1 line
the words "unsubscribe selinux" without quotes as the
message.
Quoted 1 line
Quoted 8 lines
--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Signature · 8 lines
James Carter <[email protected]> National Security Agency -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Regarding the mlsconstrain reverse order problem:
I've taken one example from the sepolicy and my corresponding entry in CIL format. As you can see the generated output is different but I'm not sure what is actually generated in the binary policy file.
sepolicy from seandroid repository - mls file entry:
mlsconstrain process { transition dyntransition }
((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);
The entry generated in the policy.conf file:
mlsconstrain process { transition dyntransition }
((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);
I generated this entry in the mls CIL file using the CIL format:
(mlsconstrain (kernel.process (transition dyntransition))
(and (or (eq h1 h2) (eq l1 l2)) (eq t1 mlstrustedsubject)))
The entry generated in the policy.conf file is:
mlsconstrain kernel.process { transition dyntransition };
(((h2 eq h1) or (l2 eq l1)) and (mlstrustedsubject eq t1));As you can see the (xx eq yy) entries are reversed and the 'or' is first with the 'and' second. It could be that I've mis-understood the CIL format.
Richard
Quoted 196 lines · James Carter
From: James Carter <[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines" <[email protected]>
Cc: "Joshua Brindle" <[email protected]>, "Jeremy Solt" <[email protected]>, [email protected]
Date: Monday, 30 July, 2012, 15:05Quoted 1 line · Richard Haines
I'm only planning to run this in the same way as
checkpolicy so not
Quoted 3 lines
worried about AOSP etc.
I'm using the most suitable CIL statements (block,
macro etc.), but as
Quoted 1 line
the policy is limited, not that many. I've converted
all modules to
Quoted 1 line
blocks, figured out the classmap/classmapping
statements and almost
Quoted 1 line
finished, although I'll probably wait for the next CIL
release as I
Quoted 4 lines
have come across three minor problems:
1) Cannot call a macro within a booleanif block.
That has been fixed at some point since the last release.
Quoted 1 line
2) The mlsconstrain statements seem to be generated in
reverse order but
Quoted 1 line
need to check manually as APOL etc doesn't
handle them.
Generated in the binary in reverse order? I don't understand what you
are referring to here.Quoted 2 lines
Are there any
utilities that will allow me to comparemlsconstrain statements within
Quoted 2 lines
a binary policy?
sediff doesn't handle constraints and I don't know of a tool that will
do that comparison.Quoted 1 line
3) Cannot generate a file context without at least one
category (example
Quoted 1 line
always wants s0:c0-s0:c0 instead of the
normal s0).
Quoted 1 line
This does need to be fixed.
Quoted 2 lines
Otherwise the current CIL compiler is running well.
Thanks for your feedback.
JimQuoted 3 lines
Richard
--- On Tue, 24/7/12, Joshua Brindle <[email protected]>
Quoted 5 lines · wrote:
Quoted 5 lines
From: Joshua Brindle <[email protected]>
Subject: Re: Is the CIL project still active
To: "Richard Haines" <[email protected]>
Cc: [email protected],"Jeremy Solt" <[email protected]>,
[email protected]Quoted 3 lines
Quoted 3 lines
Date: Tuesday, 24 July, 2012, 13:29
Quoted 1 line · Richard Haines
Glad to hear its still going as I started
converting
Quoted 2 lines
Quoted 2 lines
the Android
Quoted 1 line
policy to CIL using the current compiler that
works ok
Quoted 2 lines
Quoted 2 lines
so far. However
Quoted 1 line
I'm having problems defining 'sets of
classes' for
Quoted 3 lines
Quoted 3 lines
example with M4:
Since it is a small policy it should be possible
to do a
Quoted 2 lines
Quoted 2 lines
real, semantic
conversion (using blocks and ignoring legacy filetypes). Is
Quoted 4 lines
Quoted 4 lines
that what
you are doing?However, I'm not sure if CIL will be able to be in
Android
Quoted 4 lines
Quoted 4 lines
anytime soon.
It could still be used on the host side like
checkpolicy/libsepol are
now but since CIL is currently statically linkedagainst
Quoted 2 lines
Quoted 2 lines
libsepol (GPL)
it would be prohibited in the AOSP userspaceIIUC.
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
define(`dir_file_class_set (dir file
lnk_file
sock_fileQuoted 4 lines
Quoted 4 lines
fifo_fileQuoted 3 lines
chr_fileblk_file))I've tried various methods using
classmap/classmapping
Quoted 4 lines
Quoted 4 lines
etc. but failed
Quoted 3 lines
to work out how to define in CIL:
mlsconstrain
dir_file_class_set{ createrelabelfrom
Quoted 2 lines
Quoted 2 lines
relabelto }
Quoted 1 line
(l2 eq h2 and (l1 eq l2 or t1 ==
mlstrustedsubject));
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I can produce CIL mlsconstrain statements
when I define
Quoted 2 lines
Quoted 2 lines
them with each
Quoted 1 line
class separately but not as a set. Is it
possible with
Quoted 2 lines
Quoted 2 lines
the current
Quoted 1 line
release of CIL ? (if not I'll just produce an
entry for
Quoted 7 lines
Quoted 7 lines
each class so
Quoted 6 lines
I can continue).
Thanks
RichardQuoted 5 lines
Quoted 5 lines
Quoted 1 line
--- On Fri, 20/7/12, James Carter<[email protected]>
Quoted 3 lines · wrote:
Quoted 3 lines
From: James Carter<[email protected]>
Subject: Re: Is the CIL project stillactive
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
To: "Richard Haines"<[email protected]>
Cc: [email protected]
Date: Friday, 20 July, 2012, 20:13Quoted 1 line · Richard Haines
Does anyone know the status of the
CIL project
Quoted 2 lines
Quoted 2 lines
as it
Quoted 1 line
Quoted 1 line
looked useful and would seem ideal for
SEAndroid.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
There are still a few more bugs that need
to be
Quoted 3 lines
Quoted 3 lines
fixed so
Quoted 2 lines
Quoted 2 lines
that it can
correctly compile a CIL-transformedRefpolicy.
Quoted 3 lines
Quoted 3 lines
Progress has
Quoted 2 lines
Quoted 2 lines
been slow
recently, but it is not going to beabandoned.
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 6 lines
--
James Carter<[email protected]>
National Security Agency--
This message was distributed to subscribersof the
Quoted 2 lines
Quoted 2 lines
selinux mailing list.
Quoted 1 line
If you no longer wish to subscribe, send mail
to
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
with
Quoted 1 line
the words "unsubscribe selinux" without
quotes as the
Quoted 5 lines
Quoted 5 lines
message.
Quoted 1 line
--
This message was distributed to subscribers of theselinux
Quoted 2 lines
Quoted 2 lines
mailing list.
If you no longer wish to subscribe, send mail toQuoted 2 lines
Quoted 2 lines
with
the words "unsubscribe selinux" without quotes asthe
Quoted 6 lines
Quoted 2 lines
message.
Quoted 13 lines
Quoted 2 lines
--
This message was distributed to subscribers of theselinux mailing list.
Quoted 1 line
If you no longer wish to subscribe, send mail to [email protected]
with
Quoted 1 line
the words "unsubscribe selinux" without quotes as the
message.
Signature · 2 lines
James Carter <[email protected]> National Security Agency
--
This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Quoted 10 lines · Richard Haines
Regarding the mlsconstrain reverse order problem:
I've taken one example from the sepolicy and my corresponding entry in CIL format. As you can see the generated output is different but I'm not sure what is actually generated in the binary policy file.
sepolicy from seandroid repository - mls file entry:
mlsconstrain process { transition dyntransition }((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);
Quoted 7 lines
The entry generated in the policy.conf file:
mlsconstrain process { transition dyntransition }((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);I generated this entry in the mls CIL file using the CIL format:
(mlsconstrain (kernel.process (transition dyntransition))(and (or (eq h1 h2) (eq l1 l2)) (eq t1 mlstrustedsubject)))
I think that should be:
(or (and (eq h1 h2) (eq l1 l2)) (eq t2 mlstrustedsubject)))
That would be the prefix notation.
Quoted 8 lines
The entry generated in the policy.conf file is:
mlsconstrain kernel.process { transition dyntransition }; (((h2 eq h1) or (l2 eq l1)) and (mlstrustedsubject eq t1));As you can see the (xx eq yy) entries are reversed and the 'or' is first with the 'and' second. It could be that I've mis-understood the CIL format.
Signature · 8 lines
Stephen Smalley National Security Agency -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.
Quoted 15 lines · Stephen Smalley
Quoted 14 lines · Richard Haines
Regarding the mlsconstrain reverse order problem:
I've taken one example from the sepolicy and my corresponding entry in CIL format. As you can see the generated output is different but I'm not sure what is actually generated in the binary policy file.
sepolicy from seandroid repository - mls file entry:
mlsconstrain process { transition dyntransition }((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);The entry generated in the policy.conf file:
mlsconstrain process { transition dyntransition }((h1 eq h2 and l1 eq l2) or t1 == mlstrustedsubject);
Quoted 8 lines
Quoted 3 lines
I generated this entry in the mls CIL file using the CIL format:
(mlsconstrain (kernel.process (transition dyntransition))(and (or (eq h1 h2) (eq l1 l2)) (eq t1 mlstrustedsubject)))I think that should be:
(or (and (eq h1 h2) (eq l1 l2)) (eq t2 mlstrustedsubject)))That would be the prefix notation.
Sorry, s/t2/t1/
Quoted 11 lines
Quoted 9 lines
The entry generated in the policy.conf file is:
mlsconstrain kernel.process { transition dyntransition }; (((h2 eq h1) or (l2 eq l1)) and (mlstrustedsubject eq t1));As you can see the (xx eq yy) entries are reversed and the 'or' is first with the 'and' second. It could be that I've mis-understood the CIL format.
Signature · 8 lines
Stephen Smalley National Security Agency -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to [email protected] with the words "unsubscribe selinux" without quotes as the message.