qemu opengl issues

DISCUSSION Jack Mitchell 3 participants 5 messages Aug 17, 2012

Share & tools

Jack Mitchell

author

2012-08-17 15:04 UTC #0 lore raw

So I am trying to build qemuarm with latest master and I ran into this issue:

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.2967 Log data follows:

   | DEBUG: Executing python function sysroot_cleansstate
   | DEBUG: Python function sysroot_cleansstate finished
   | DEBUG: Executing shell function do_configure
   | libSDL and header no found to build opengl acceleration for
   qemu-native.
   |     Ubuntu package names are: libsdl1.2-dev.
   |     Fedora package names are: SDL-devel.
   | ERROR: Function failed: do_configure (see

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Task 67 (virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devtools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1099 tasks of which 1074 didn't need
to be rerun and 1 failed.

Summary: 1 task failed:
virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devtools/qemu/qemu_0.15.1.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Ok, I thought, lets install the sdl libraries. Which has now given me this error:

Build Configuration:

   BB_VERSION        = "1.15.3"
   TARGET_ARCH       = "arm"
   TARGET_OS         = "linux-gnueabi"
   MACHINE           = "qemuarm"
   DISTRO            = "poky"
   DISTRO_VERSION    = "1.2+snapshot-20120817"
   TUNE_FEATURES     = "armv5 dsp thumb arm926ejs"
   TARGET_FPU        = "soft"

meta
meta-yocto = "master:bddd8300325267253941e7ce656ce2cf86a8a4a4"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see /mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.6313 Log data follows:

   | DEBUG: Executing python function sysroot_cleansstate
   | DEBUG: Python function sysroot_cleansstate finished
   | DEBUG: Executing shell function do_configure
   | ERROR
   | ERROR: User requested feature gl_accel
   | ERROR: configure was not able to find it
   | ERROR
   | ERROR: Function failed: do_configure (see

/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu-native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Task 67 (virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devtools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1152 tasks of which 1108 didn't need
to be rerun and 1 failed.

I am building on a headless machine with no X if that makes any difference in the matter...

Regards,

Signature · 5 lines

  Jack Mitchell ([email protected])
  Embedded Systems Engineer
  http://www.embed.me.uk

--

Paul Eggleton

2012-08-17 15:12 UTC #1 lore raw

Quoted 101 lines · On Friday 17 August 2012 15:54:06 Jack Mitchell wrote:

So I am trying to build qemuarm with latest master and I ran into this issue:
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| libSDL and header no found to build opengl acceleration for
qemu-native.
| Ubuntu package names are: libsdl1.2-dev.
| Fedora package names are: SDL-devel.
|
| ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Task 67
(virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devt ools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1099 tasks of which 1074 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devtoo ls/qemu/qemu_0.15.1.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Ok, I thought, lets install the sdl libraries. Which has now given me this error:
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "qemuarm"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120817"
TUNE_FEATURES = "armv5 dsp thumb arm926ejs"
TARGET_FPU = "soft"
meta
meta-yocto = "master:bddd8300325267253941e7ce656ce2cf86a8a4a4"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| ERROR
| ERROR: User requested feature gl_accel
| ERROR: configure was not able to find it
| ERROR
| ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Task 67
(virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devt ools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1152 tasks of which 1108 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devto ols/qemu/qemu_0.15.1.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Quoted 2 lines

I am building on a headless machine with no X if that makes any difference in the matter...

Right, this is a known limitation - see Yocto Project bug 2407. By pure coincidence I was thinking about fixing it today as I am testing some other related changes; for now the only options are install the required recipes or hack out the gl-requiring parts of the qemu recipe.

Cheers,
Paul

Signature · 2 lines

Paul Eggleton
Intel Open Source Technology Centre

Richard Purdie

2012-08-17 15:26 UTC #2 lore raw

Quoted 102 lines · Paul Eggleton

Quoted 101 lines · On Friday 17 August 2012 15:54:06 Jack Mitchell wrote:
So I am trying to build qemuarm with latest master and I ran into this issue:
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| libSDL and header no found to build opengl acceleration for
qemu-native.
| Ubuntu package names are: libsdl1.2-dev.
| Fedora package names are: SDL-devel.
|
| ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.2967 for further information)
ERROR: Task 67
(virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devt ools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1099 tasks of which 1074 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devtoo ls/qemu/qemu_0.15.1.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
Ok, I thought, lets install the sdl libraries. Which has now given me this error:
Build Configuration:
BB_VERSION = "1.15.3"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "qemuarm"
DISTRO = "poky"
DISTRO_VERSION = "1.2+snapshot-20120817"
TUNE_FEATURES = "armv5 dsp thumb arm926ejs"
TARGET_FPU = "soft"
meta
meta-yocto = "master:bddd8300325267253941e7ce656ce2cf86a8a4a4"
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Logfile of failure stored in:
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function do_configure
| ERROR
| ERROR: User requested feature gl_accel
| ERROR: configure was not able to find it
| ERROR
| ERROR: Function failed: do_configure (see
/mnt/storage/yoctoBuilds/poky-vanilla.git/build/tmp/work/x86_64-linux/qemu- native-0.15.1-r11/temp/log.do_configure.6313 for further information)
ERROR: Task 67
(virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devt ools/qemu/qemu_0.15.1.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1152 tasks of which 1108 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
virtual:native:/mnt/storage/yoctoBuilds/poky-vanilla.git/meta/recipes-devto ols/qemu/qemu_0.15.1.bb, do_configure
Summary: There was 1 WARNING message shown.
Summary: There was 1 ERROR message shown, returning a non-zero exit code.

Quoted 7 lines

Quoted 2 lines
I am building on a headless machine with no X if that makes any difference in the matter...
Right, this is a known limitation - see Yocto Project bug 2407. By pure coincidence I was thinking about fixing it today as I am testing some other related changes; for now the only options are install the required recipes or hack out the gl-requiring parts of the qemu recipe.

I think we're about at the point where we're going to remove GL pass through support and drop our qemu GL patches. Patches will likely appear next week.

Cheers,

Richard

Jack Mitchell

author

2012-08-17 15:41 UTC #3 lore raw

Quoted 7 lines

Quoted 6 lines
Right, this is a known limitation - see Yocto Project bug 2407. By pure coincidence I was thinking about fixing it today as I am testing some other related changes; for now the only options are install the required recipes or hack out the gl-requiring parts of the qemu recipe.

Quoted 8 lines

I think we're about at the point where we're going to remove GL pass through support and drop our qemu GL patches. Patches will likely appear next week.
Cheers,
Richard

Sounds good, I'm on holiday from the 22nd till 29th so will hopefully see them when I get back!

Apologies for not checking the bug tracker first.

*side note: with so many categories it can be a massive farse trying to navigate the bugzilla to find bugs, even more so on top of an already cluttered/complicated web application.

edit: I have just looked to see if I could find the bug without looking at it first (using the id) and I failed miserably.. maybe the force is not with my today but I couldn't even decipher where qemu issues would be.

Regards,

Signature · 5 lines

  Jack Mitchell ([email protected])
  Embedded Systems Engineer
  http://www.embed.me.uk

--

Paul Eggleton

2012-08-17 15:46 UTC #4 lore raw

Quoted 8 lines · On Friday 17 August 2012 16:31:17 Jack Mitchell wrote:

Quoted 7 lines · Richard Purdie
Quoted 5 lines · Paul Eggleton
Right, this is a known limitation - see Yocto Project bug 2407. By pure coincidence I was thinking about fixing it today as I am testing some other
related changes; for now the only options are install the required recipes or hack out the gl-requiring parts of the qemu recipe.

Quoted 8 lines

Quoted 3 lines
I think we're about at the point where we're going to remove GL pass through support and drop our qemu GL patches. Patches will likely appear next week.
Sounds good, I'm on holiday from the 22nd till 29th so will hopefully see them when I get back!
Apologies for not checking the bug tracker first.

No worries - it's nice when people do check first but I wouldn't personally consider it mandatory.

Quoted 7 lines

*side note: with so many categories it can be a massive farse trying to navigate the bugzilla to find bugs, even more so on top of an already cluttered/complicated web application.
edit: I have just looked to see if I could find the bug without looking at it first (using the id) and I failed miserably.. maybe the force is not with my today but I couldn't even decipher where qemu issues would be.

I usually just do a keyword search using the box at the top - seems effective to me most of the time.

Cheers,
Paul

Signature · 2 lines

Paul Eggleton
Intel Open Source Technology Centre