tune-ppc440: Reorder tune features.
PATCH 1/7 tune-ppc440: Reorder tune features.
* Minor change to reorder the tune features.
--- conf/machine/include/tune-ppc440.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
conf/machine/include/tune-ppc440.inc +1 -1
@@ -6,7 +6,7 @@ TUNEVALID[ppc440] = "Enable ppc440 specific processor optimizations" TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "ppc440", "-mcpu=440", "", d)}" AVAILTUNES += "ppc440" -TUNE_FEATURES_tune-ppc440 = "m32 fpu-soft ppc440" +TUNE_FEATURES_tune-ppc440 = "m32 ppc440 fpu-soft" TUNE_PKGARCH_tune-ppc440 = "ppc440" PACKAGE_EXTRA_ARCHS_tune-ppc440 = "${PACKAGE_EXTRA_ARCHS_tune-powerpc-nf} ppc440"
Signature · 1 line
1.7.9.5
PATCH 2/7 tune-ppc405: Add glibc configure options.
* Add glibc configure options to get ppc405 specific library.
* Minor changes to tune-ppc405 recipe to specify soft-float option.
--- conf/machine/include/tune-ppc405.inc | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
conf/machine/include/tune-ppc405.inc +5 -5
@@ -4,11 +4,11 @@ require conf/machine/include/powerpc/arch-powerpc.inc TUNEVALID[ppc405] = "Enable ppc405 specific processor optimizations" TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "ppc405", "-mcpu=405", "", d)}" -TUNE_PKGARCH = "${@bb.utils.contains("TUNE_FEATURES", "ppc405", "ppc405", "${PPCPKGARCH}", d)}" -TARGET_FPU = "soft" AVAILTUNES += "ppc405" -TUNE_FEATURES_tune-ppc405 = "m32 ppc405" -PACKAGE_EXTRA_ARCHS_tune-ppc405 = "ppc405" +TUNE_FEATURES_tune-ppc405 = "m32 ppc405 fpu-soft" +TUNE_PKGARCH_tune-ppc440 = "ppc405" +PACKAGE_EXTRA_ARCHS_tune-ppc405 = "${PACKAGE_EXTRA_ARCHS_tune-powerpc-nf} ppc405" -#MACHINEOVERRIDES .= "ppc405" +# glibc configure options to get ppc440 specific library (for sqrt) +GLIBC_EXTRA_OECONF += "${@bb.utils.contains("TUNE_FEATURES", "ppc405", "-with-cpu=405", "", d)}"
Signature · 1 line
1.7.9.5
PATCH 3/7 tune-ppc405e: Add tune-ppc405e file.
In reply to Elvis Dowson* Tune option for ppc405e with hard-float.
--- conf/machine/include/tune-ppc405e.inc | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 conf/machine/include/tune-ppc405e.inc
conf/machine/include/tune-ppc405e.inc new file +14 -0
@@ -0,0 +1,14 @@ +DEFAULTTUNE ?= "ppc405e" + +require conf/machine/include/powerpc/arch-powerpc.inc + +TUNEVALID[ppc405e] = "Enable ppc405e specific processor optimizations" +TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "ppc405e", "-mcpu=405fp", "", d)}" + +AVAILTUNES += "ppc405e" +TUNE_FEATURES_tune-ppc405e = "m32 ppc405e fpu-hard" +TUNE_PKGARCH_tune-ppc440e = "ppc405e" +PACKAGE_EXTRA_ARCHS_tune-ppc405e = "${PACKAGE_EXTRA_ARCHS_tune-powerpc} ppc405e" + +# glibc configure options to get ppc405e specific library (for sqrt) +GLIBC_EXTRA_OECONF += "${@bb.utils.contains("TUNE_FEATURES", "ppc405e", "-with-cpu=405fp", "", d)}"
Signature · 1 line
1.7.9.5
PATCH 4/7 tune-ppc440e: Add tune-ppc440e file.
In reply to Elvis Dowson* Tune option for ppc440e with hard-float.
--- conf/machine/include/tune-ppc440e.inc | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 conf/machine/include/tune-ppc440e.inc
conf/machine/include/tune-ppc440e.inc new file +14 -0
@@ -0,0 +1,14 @@ +DEFAULTTUNE ?= "ppc440e" + +require conf/machine/include/powerpc/arch-powerpc.inc + +TUNEVALID[ppc440e] = "Enable ppc440e specific processor optimizations" +TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "ppc440e", "-mcpu=440fp", "", d)}" + +AVAILTUNES += "ppc440e" +TUNE_FEATURES_tune-ppc440e = "m32 ppc440e fpu-hard" +TUNE_PKGARCH_tune-ppc440e = "ppc440e" +PACKAGE_EXTRA_ARCHS_tune-ppc440e = "${PACKAGE_EXTRA_ARCHS_tune-powerpc} ppc440e" + +# glibc configure options to get ppc440e specific library (for sqrt) +GLIBC_EXTRA_OECONF += "${@bb.utils.contains("TUNE_FEATURES", "ppc440e", "-with-cpu=440fp", "", d)}"
Signature · 1 line
1.7.9.5
PATCH 5/7 xilinx-boot.bbclass: Add support for selecting the xilinx hardware bitstream file.
In reply to Elvis Dowson* Remove hard-coded references to the xilinx hardware bitstream file, and allow selection via a variable XILINX_BITSTREAM_FILE .
--- classes/xilinx-boot.bbclass | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
classes/xilinx-boot.bbclass +4 -2
@@ -104,7 +104,9 @@ fi # For Xilinx EDK 13.1 Bootloop is set by default # cd ${XILINX_BSP_PATH} -if [ ! -f implementation/download.bit ]; then +#XILINX_BITSTREAM_FILE=implementation/download.bit +XILINX_BITSTREAM_FILE=implementation/system.bit +if [ ! -f ${XILINX_BITSTREAM_FILE} ]; then # Bitstream not found generate it bbnote "bitstream not found, generating it" make -f ${XILINX_BSP_PATH}/system.make init_bram
@@ -114,7 +116,7 @@ if [ "${TARGET_ARCH}" = "powerpc" ]; then # Find u-boot start address start_address=`${TARGET_PREFIX}objdump -x u-boot | grep -w "start address" | cut -d ' ' -f3` # Generate ACE image - xmd -tcl genace.tcl -hw implementation/download.bit -elf u-boot \ + xmd -tcl genace.tcl -hw ${XILINX_BITSTREAM_FILE} -elf u-boot \ -target ppc_hw -start_address ${start_address} -ace u-boot-${XILINX_BOARD}.ace \ -board ${XILINX_BOARD} fi
Signature · 1 line
1.7.9.5
PATCH 6/7 conf: Add bblayers.conf sample configuration file.
In reply to Elvis Dowson* Add bblayers.conf sample configuration file to build meta-xilinx using gcc-4.5 and eglibc-2.13 retired toolchain recipes from the meta-openembedded/toolchain-layer.
--- conf/bblayers.conf.sample | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 conf/bblayers.conf.sample
conf/bblayers.conf.sample new file +13 -0
@@ -0,0 +1,13 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "5" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + /tool/yocto/poky/meta \ + /tool/yocto/poky/meta-yocto \ + /tool/yocto/meta-xilinx \ + /tool/yocto/meta-openembedded/toolchain-layer \ + "
Signature · 1 line
1.7.9.5
PATCH 7/7 conf: Add local.conf sample configuration file.
In reply to Elvis Dowson* Add local.conf sample configuration file to build meta-xilinx using gcc-4.5 and eglibc-2.13 retired toolchain recipes from the meta-openembedded/toolchain-layer, for the Xilinx ML507 development board using the Virtex-5 PowerPC 440 processor.
--- conf/local.conf.sample | 300 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 300 insertions(+) create mode 100644 conf/local.conf.sample
conf/local.conf.sample new file +300 -0
@@ -0,0 +1,300 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Parallelism Options +# +# These two options control how much parallelism BitBake should use. The first +# option determines how many tasks bitbake should run in parallel: +# +BB_NUMBER_THREADS = "8" +# +# The second option controls how many processes make should run in parallel when +# running compile tasks: +# +PARALLEL_MAKE = "-j 8" +# +# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would +# be appropriate for example. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "atom-pc" +#MACHINE ?= "beagleboard" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "routerstationpro" +#MACHINE ?= "overo-fire-chestnut43" +# +# +# This sets the default machine to be qemux86 if no other machine is selected: +# MACHINE ??= "qemux86" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to ipk for embedded targets: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK/ADT target architecture +# +# This variable specified the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host._ +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "tools-profile" - add profiling tools (oprofile, exmap, lttng valgrind (x86 only)) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +#USER_CLASSES ?= "buildstats image-mklibs image-prelink" +# Add image-mklibs image-prelink for PowerPC 32-bit and 64-bit targets. +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line +#IMAGETEST = "qemu" +# +# This variable controls which tests are run against virtual images if enabled +# above. The following would enable bat, boot the test case under the sanity suite +# and perform toolchain tests +#TEST_SCEN = "sanity bat sanity:boot toolchain" +# +# Because of the QEMU booting slowness issue (see bug #646 and #618), the +# autobuilder may suffer a timeout issue when running sanity tests. We introduce +# the variable TEST_SERIALIZE here to reduce the time taken by the sanity tests. +# It is set to 1 by default, which will boot the image and run cases in the same +# image without rebooting or killing the machine instance. If it is set to 0, the +# image will be copied and tested for each case, which will take longer but be +# more precise. +#TEST_SERIALIZE = "1" + +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/ \n \ +#file://.* file:///some/local/dir/sstate/" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# +# MIRRORS/PREMIRRORS locations. +# +# Add the PREMIRRORS statement to the configuration file, so that local directories +# are first checked for existing tarballs before running out to the net. +#PREMIRRORS_prepend = "\ +# git://.*/.* file:///pub/scm/repositories/ \n \ +# git://.*/.* file:///pub/scm/repositories/kernel \n \ +# " + +# Set the external toolchain. +#TCMODE = "external-sourcery-rebuild-libc" +#EXTERNAL_TOOLCHAIN = "/tool/mentor/csl-2012.03.71" +#NO32LIBS = "0" +#CSL_VER_MAIN_powerpc = "2012.03-71" +#CSL_TARGET_SYS_powerpc = "powerpc-mentor-linux-gnu" + +#PREFERRED_PROVIDER_linux-libc-headers = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-initial = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}gcc-intermediate = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}g++ = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}binutils = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}libc-for-gcc = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/${TARGET_PREFIX}compilerlibs = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_libgcc = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_eglibc = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/libc = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/libintl = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/libiconv = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_gdbserver = "external-sourcery-toolchain" +#PREFERRED_PROVIDER_virtual/gettext = "gettext" + +# Set the gcc toolchain version. +# Use wildcards %, to match the actual versions. +GCCVERSION = "4.5%" +SDKGCCVERSION = "${GCCVERSION}" +BINUVERSION = "2.22" +EGLIBCVERSION = "2.13" +UCLIBCVERSION = "0.9.33" +LINUXLIBCVERSION = "3.3" + +# Set the default serial console +KERNEL_CONSOLE = "ttyS0" +SERIAL_CONSOLE = "115200 ttyS0" + +# +# Xilinx ISE Design Tools +# +# Set Xilinx tools installation path +XILINX_LOC ?= "/tool/xilinx/14.2/ISE_DS" +# Set Xilinx EDK installation path +#XILINX_EDK ?= "${XILINX_LOC}/EDK" + +# +# Xilinx target board configuration. +# +# Set the target machine details +MACHINE ?= "virtex5" +#MACHINE ?= "qemuppc" +# Set the target board details +XILINX_BOARD ?= "ml507" + +# +# Set Xilinx Platform Studio hardware project path +# +# Set Xilinx BSP path +XILINX_BSP_PATH ?= "/project/xilinx-ml507-xps-14.2-aalonso" +
Signature · 1 line
1.7.9.5