Initial multi-platform support
Subsystems (27)
cover Initial multi-platform support
From: Rob Herring <[email protected]>
This series enables initial multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress.
There's a couple of issues which I'm aware of:
- DEBUG_LL does not work (even for 1 platform).
- make dtbs does not work. It needs to be changes such that the build will iterate over mach-dirs instead of using MACHINE
This series is dependent on gpio.h clean-up and is available here:
git://sources.calxeda.com/kernel/linux.git multi-plat
Rob
Arnd Bergmann (1):
ARM: vexpress: remove dependency on mach/* headers
Rob Herring (5):
ARM: move ARCH config definitions into mach dirs
ARM: introduce Kconfig.mach
ARM: picoxcell: header fixes for multi-platform
ARM: initial multiplatform support
ARM: update defconfigs
arch/arm/Kconfig | 923 +------------------- arch/arm/Kconfig.mach | 585 +++++++++++++ arch/arm/Makefile | 155 ++-- arch/arm/boot/compressed/misc.c | 6 + arch/arm/configs/acs5k_defconfig | 2 +- arch/arm/configs/acs5k_tiny_defconfig | 2 +- arch/arm/configs/afeb9260_defconfig | 2 +- arch/arm/configs/ag5evm_defconfig | 2 +- arch/arm/configs/am200epdkit_defconfig | 2 +- arch/arm/configs/ap4evb_defconfig | 2 +- arch/arm/configs/armadillo800eva_defconfig | 2 +- arch/arm/configs/assabet_defconfig | 2 +- arch/arm/configs/at91_dt_defconfig | 2 +- arch/arm/configs/at91rm9200_defconfig | 2 +- arch/arm/configs/at91sam9260_defconfig | 2 +- arch/arm/configs/at91sam9261_defconfig | 2 +- arch/arm/configs/at91sam9263_defconfig | 2 +- arch/arm/configs/at91sam9g20_defconfig | 2 +- arch/arm/configs/at91sam9g45_defconfig | 2 +- arch/arm/configs/at91sam9rl_defconfig | 2 +- arch/arm/configs/at91x40_defconfig | 2 +- arch/arm/configs/badge4_defconfig | 2 +- arch/arm/configs/bcmring_defconfig | 2 +- arch/arm/configs/bonito_defconfig | 2 +- arch/arm/configs/cam60_defconfig | 2 +- arch/arm/configs/cerfcube_defconfig | 2 +- arch/arm/configs/cm_x2xx_defconfig | 2 +- arch/arm/configs/cm_x300_defconfig | 2 +- arch/arm/configs/cns3420vb_defconfig | 2 +- arch/arm/configs/colibri_pxa270_defconfig | 2 +- arch/arm/configs/colibri_pxa300_defconfig | 2 +- arch/arm/configs/collie_defconfig | 2 +- arch/arm/configs/corgi_defconfig | 2 +- arch/arm/configs/cpu9260_defconfig | 2 +- arch/arm/configs/cpu9g20_defconfig | 2 +- arch/arm/configs/da8xx_omapl_defconfig | 2 +- arch/arm/configs/davinci_all_defconfig | 2 +- arch/arm/configs/dove_defconfig | 2 +- arch/arm/configs/ebsa110_defconfig | 2 +- arch/arm/configs/edb7211_defconfig | 2 +- arch/arm/configs/em_x270_defconfig | 2 +- arch/arm/configs/ep93xx_defconfig | 2 +- arch/arm/configs/eseries_pxa_defconfig | 2 +- arch/arm/configs/exynos4_defconfig | 2 +- arch/arm/configs/exynos_defconfig | 4 +- arch/arm/configs/ezx_defconfig | 2 +- arch/arm/configs/footbridge_defconfig | 2 +- arch/arm/configs/fortunet_defconfig | 2 +- arch/arm/configs/g3evm_defconfig | 2 +- arch/arm/configs/g4evm_defconfig | 2 +- arch/arm/configs/h3600_defconfig | 2 +- arch/arm/configs/h5000_defconfig | 2 +- arch/arm/configs/h7201_defconfig | 2 +- arch/arm/configs/h7202_defconfig | 2 +- arch/arm/configs/hackkit_defconfig | 2 +- arch/arm/configs/imote2_defconfig | 2 +- arch/arm/configs/imx_v4_v5_defconfig | 2 +- arch/arm/configs/imx_v6_v7_defconfig | 2 +- arch/arm/configs/integrator_defconfig | 2 +- arch/arm/configs/iop13xx_defconfig | 2 +- arch/arm/configs/iop32x_defconfig | 2 +- arch/arm/configs/iop33x_defconfig | 2 +- arch/arm/configs/ixp4xx_defconfig | 2 +- arch/arm/configs/jornada720_defconfig | 2 +- arch/arm/configs/kirkwood_defconfig | 2 +- arch/arm/configs/kota2_defconfig | 2 +- arch/arm/configs/ks8695_defconfig | 2 +- arch/arm/configs/kzm9d_defconfig | 2 +- arch/arm/configs/kzm9g_defconfig | 2 +- arch/arm/configs/lart_defconfig | 2 +- arch/arm/configs/lpc32xx_defconfig | 2 +- arch/arm/configs/lpd270_defconfig | 2 +- arch/arm/configs/lubbock_defconfig | 2 +- arch/arm/configs/mackerel_defconfig | 2 +- arch/arm/configs/magician_defconfig | 2 +- arch/arm/configs/mainstone_defconfig | 2 +- arch/arm/configs/marzen_defconfig | 2 +- arch/arm/configs/mini2440_defconfig | 2 +- arch/arm/configs/mmp2_defconfig | 2 +- arch/arm/configs/msm_defconfig | 2 +- arch/arm/configs/mv78xx0_defconfig | 2 +- arch/arm/configs/mvebu_defconfig | 2 +- arch/arm/configs/mxs_defconfig | 2 +- arch/arm/configs/neponset_defconfig | 2 +- arch/arm/configs/netwinder_defconfig | 2 +- arch/arm/configs/netx_defconfig | 2 +- arch/arm/configs/nhk8815_defconfig | 2 +- arch/arm/configs/nuc910_defconfig | 2 +- arch/arm/configs/nuc950_defconfig | 2 +- arch/arm/configs/nuc960_defconfig | 2 +- arch/arm/configs/omap1_defconfig | 2 +- arch/arm/configs/omap2plus_defconfig | 2 +- arch/arm/configs/orion5x_defconfig | 2 +- arch/arm/configs/palmz72_defconfig | 2 +- arch/arm/configs/pcm027_defconfig | 2 +- arch/arm/configs/pleb_defconfig | 2 +- arch/arm/configs/pnx4008_defconfig | 2 +- arch/arm/configs/prima2_defconfig | 2 +- arch/arm/configs/pxa168_defconfig | 2 +- arch/arm/configs/pxa255-idp_defconfig | 2 +- arch/arm/configs/pxa3xx_defconfig | 2 +- arch/arm/configs/pxa910_defconfig | 2 +- arch/arm/configs/qil-a9260_defconfig | 2 +- arch/arm/configs/raumfeld_defconfig | 2 +- arch/arm/configs/realview-smp_defconfig | 2 +- arch/arm/configs/realview_defconfig | 2 +- arch/arm/configs/rpc_defconfig | 2 +- arch/arm/configs/s3c2410_defconfig | 2 +- arch/arm/configs/s3c6400_defconfig | 2 +- arch/arm/configs/s5p64x0_defconfig | 2 +- arch/arm/configs/s5pc100_defconfig | 2 +- arch/arm/configs/s5pv210_defconfig | 2 +- arch/arm/configs/sam9_l9260_defconfig | 2 +- arch/arm/configs/shannon_defconfig | 2 +- arch/arm/configs/shark_defconfig | 2 +- arch/arm/configs/simpad_defconfig | 2 +- arch/arm/configs/socfpga_defconfig | 2 +- arch/arm/configs/spear13xx_defconfig | 2 +- arch/arm/configs/spear6xx_defconfig | 2 +- arch/arm/configs/spitz_defconfig | 2 +- arch/arm/configs/stamp9g20_defconfig | 2 +- arch/arm/configs/tct_hammer_defconfig | 2 +- arch/arm/configs/tegra_defconfig | 2 +- arch/arm/configs/trizeps4_defconfig | 2 +- arch/arm/configs/u300_defconfig | 2 +- arch/arm/configs/u8500_defconfig | 2 +- arch/arm/configs/usb-a9260_defconfig | 2 +- arch/arm/configs/vexpress_defconfig | 2 +- arch/arm/configs/viper_defconfig | 2 +- arch/arm/configs/xcep_defconfig | 2 +- arch/arm/configs/zeus_defconfig | 2 +- arch/arm/include/asm/timex.h | 4 + arch/arm/mach-at91/Kconfig | 8 + arch/arm/mach-bcmring/Kconfig | 9 + arch/arm/mach-clps711x/Kconfig | 6 + arch/arm/mach-cns3xxx/Kconfig | 9 + arch/arm/mach-davinci/Kconfig | 12 + arch/arm/mach-dove/Kconfig | 9 + arch/arm/mach-ebsa110/Kconfig | 9 + arch/arm/mach-ep93xx/Kconfig | 11 + arch/arm/mach-exynos/Kconfig | 16 + arch/arm/mach-footbridge/Kconfig | 9 + arch/arm/mach-gemini/Kconfig | 6 + arch/arm/mach-h720x/Kconfig | 6 + arch/arm/mach-highbank/Kconfig | 15 + arch/arm/mach-integrator/Kconfig | 16 + arch/arm/mach-iop13xx/Kconfig | 11 + arch/arm/mach-iop32x/Kconfig | 10 + arch/arm/mach-iop33x/Kconfig | 10 + arch/arm/mach-ixp4xx/Kconfig | 11 + arch/arm/mach-kirkwood/Kconfig | 9 + arch/arm/mach-ks8695/Kconfig | 7 + arch/arm/mach-lpc32xx/Kconfig | 12 + arch/arm/mach-mmp/Kconfig | 12 + arch/arm/mach-msm/Kconfig | 7 + arch/arm/mach-mv78xx0/Kconfig | 9 + arch/arm/mach-mvebu/Kconfig | 10 + arch/arm/mach-mvebu/Makefile | 2 + arch/arm/mach-mxs/Kconfig | 11 + arch/arm/mach-netx/Kconfig | 7 + arch/arm/mach-nomadik/Kconfig | 11 + arch/arm/mach-orion5x/Kconfig | 9 + arch/arm/mach-picoxcell/Kconfig | 14 + arch/arm/mach-picoxcell/common.c | 6 +- arch/arm/mach-picoxcell/include/mach/map.h | 25 - .../mach-picoxcell/include/mach/picoxcell_soc.h | 25 - arch/arm/mach-picoxcell/picoxcell_soc.h | 25 + arch/arm/mach-pnx4008/Kconfig | 5 + arch/arm/mach-pxa/Kconfig | 16 + arch/arm/mach-realview/Kconfig | 15 + arch/arm/mach-rpc/Kconfig | 13 + arch/arm/mach-s3c24xx/Kconfig | 13 + arch/arm/mach-s3c64xx/Kconfig | 26 + arch/arm/mach-s5p64x0/Kconfig | 13 + arch/arm/mach-s5pc100/Kconfig | 12 + arch/arm/mach-s5pv210/Kconfig | 17 + arch/arm/mach-sa1100/Kconfig | 17 + arch/arm/mach-shark/Kconfig | 11 + arch/arm/mach-shmobile/Kconfig | 14 + arch/arm/mach-socfpga/Kconfig | 16 + arch/arm/mach-tegra/Kconfig | 13 + arch/arm/mach-u300/Kconfig | 14 + arch/arm/mach-ux500/Kconfig | 11 + arch/arm/mach-versatile/Kconfig | 16 + arch/arm/mach-vexpress/Kconfig | 16 + arch/arm/mach-vexpress/Makefile | 2 + arch/arm/mach-vexpress/ct-ca9x4.c | 1 + arch/arm/mach-vexpress/include/mach/irqs.h | 2 + arch/arm/mach-vt8500/Kconfig | 8 + arch/arm/mach-w90x900/Kconfig | 8 + arch/arm/mach-zynq/Kconfig | 10 + arch/arm/plat-mxc/Kconfig | 11 + arch/arm/plat-omap/Kconfig | 9 + arch/arm/plat-spear/Kconfig | 9 + arch/arm/plat-versatile/Makefile | 2 + 195 files changed, 1455 insertions(+), 1178 deletions(-) create mode 100644 arch/arm/Kconfig.mach create mode 100644 arch/arm/mach-ebsa110/Kconfig create mode 100644 arch/arm/mach-highbank/Kconfig create mode 100644 arch/arm/mach-lpc32xx/Kconfig create mode 100644 arch/arm/mach-picoxcell/Kconfig delete mode 100644 arch/arm/mach-picoxcell/include/mach/map.h delete mode 100644 arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h create mode 100644 arch/arm/mach-picoxcell/picoxcell_soc.h create mode 100644 arch/arm/mach-pnx4008/Kconfig create mode 100644 arch/arm/mach-rpc/Kconfig create mode 100644 arch/arm/mach-shark/Kconfig create mode 100644 arch/arm/mach-socfpga/Kconfig create mode 100644 arch/arm/mach-zynq/Kconfig
Signature · 1 line
1.7.9.5
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
From: Rob Herring <[email protected]>
In preparation for mulit-platform support, convert all platforms' ARCH_ definition to a hidden option and create a new choice option.
--- arch/arm/Kconfig | 650 ++++++++------------------------------ arch/arm/mach-at91/Kconfig | 8 + arch/arm/mach-bcmring/Kconfig | 9 + arch/arm/mach-clps711x/Kconfig | 6 + arch/arm/mach-cns3xxx/Kconfig | 9 + arch/arm/mach-davinci/Kconfig | 12 + arch/arm/mach-dove/Kconfig | 9 + arch/arm/mach-ebsa110/Kconfig | 9 + arch/arm/mach-ep93xx/Kconfig | 11 + arch/arm/mach-exynos/Kconfig | 16 + arch/arm/mach-footbridge/Kconfig | 9 + arch/arm/mach-gemini/Kconfig | 6 + arch/arm/mach-h720x/Kconfig | 6 + arch/arm/mach-highbank/Kconfig | 15 + arch/arm/mach-integrator/Kconfig | 16 + arch/arm/mach-iop13xx/Kconfig | 11 + arch/arm/mach-iop32x/Kconfig | 10 + arch/arm/mach-iop33x/Kconfig | 10 + arch/arm/mach-ixp4xx/Kconfig | 11 + arch/arm/mach-kirkwood/Kconfig | 9 + arch/arm/mach-ks8695/Kconfig | 7 + arch/arm/mach-lpc32xx/Kconfig | 12 + arch/arm/mach-mmp/Kconfig | 12 + arch/arm/mach-msm/Kconfig | 7 + arch/arm/mach-mv78xx0/Kconfig | 9 + arch/arm/mach-mvebu/Kconfig | 10 + arch/arm/mach-mxs/Kconfig | 11 + arch/arm/mach-netx/Kconfig | 7 + arch/arm/mach-nomadik/Kconfig | 11 + arch/arm/mach-orion5x/Kconfig | 9 + arch/arm/mach-picoxcell/Kconfig | 14 + arch/arm/mach-pnx4008/Kconfig | 5 + arch/arm/mach-pxa/Kconfig | 16 + arch/arm/mach-realview/Kconfig | 15 + arch/arm/mach-rpc/Kconfig | 13 + arch/arm/mach-s3c24xx/Kconfig | 13 + arch/arm/mach-s3c64xx/Kconfig | 26 ++ arch/arm/mach-s5p64x0/Kconfig | 13 + arch/arm/mach-s5pc100/Kconfig | 12 + arch/arm/mach-s5pv210/Kconfig | 17 + arch/arm/mach-sa1100/Kconfig | 17 + arch/arm/mach-shark/Kconfig | 11 + arch/arm/mach-shmobile/Kconfig | 14 + arch/arm/mach-socfpga/Kconfig | 16 + arch/arm/mach-tegra/Kconfig | 13 + arch/arm/mach-u300/Kconfig | 14 + arch/arm/mach-ux500/Kconfig | 11 + arch/arm/mach-versatile/Kconfig | 16 + arch/arm/mach-vexpress/Kconfig | 16 + arch/arm/mach-vt8500/Kconfig | 8 + arch/arm/mach-w90x900/Kconfig | 8 + arch/arm/mach-zynq/Kconfig | 10 + arch/arm/plat-mxc/Kconfig | 11 + arch/arm/plat-omap/Kconfig | 9 + arch/arm/plat-spear/Kconfig | 9 + 55 files changed, 742 insertions(+), 522 deletions(-) create mode 100644 arch/arm/mach-ebsa110/Kconfig create mode 100644 arch/arm/mach-highbank/Kconfig create mode 100644 arch/arm/mach-lpc32xx/Kconfig create mode 100644 arch/arm/mach-picoxcell/Kconfig create mode 100644 arch/arm/mach-pnx4008/Kconfig create mode 100644 arch/arm/mach-rpc/Kconfig create mode 100644 arch/arm/mach-shark/Kconfig create mode 100644 arch/arm/mach-socfpga/Kconfig create mode 100644 arch/arm/mach-zynq/Kconfig
arch/arm/Kconfig +128 -522
@@ -256,424 +256,213 @@ choice prompt "ARM system type" default ARCH_VERSATILE -config ARCH_SOCFPGA +config ARCH_SOCFPGA_CHOICE bool "Altera SOCFPGA family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_GIC - select CACHE_L2X0 - select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_V7 - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GPIO_PL061 if GPIOLIB - select HAVE_ARM_SCU - select SPARSE_IRQ - select USE_OF + select ARCH_SOCFPGA help This enables support for Altera SOCFPGA Cyclone V platform -config ARCH_INTEGRATOR +config ARCH_INTEGRATOR_CHOICE bool "ARM Ltd. Integrator family" - select ARM_AMBA - select ARCH_HAS_CPUFREQ - select COMMON_CLK - select CLK_VERSATILE - select HAVE_TCM - select ICST - select GENERIC_CLOCKEVENTS - select PLAT_VERSATILE - select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - select MULTI_IRQ_HANDLER + select ARCH_INTEGRATOR help Support for ARM's Integrator platform. -config ARCH_REALVIEW +config ARCH_REALVIEW_CHOICE bool "ARM Ltd. RealView family" - select ARM_AMBA - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV - select ICST - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_CLCD - select ARM_TIMER_SP804 - select GPIO_PL061 if GPIOLIB - select NEED_MACH_MEMORY_H + select ARCH_REALVIEW help This enables support for ARM Ltd RealView boards. -config ARCH_VERSATILE +config ARCH_VERSATILE_CHOICE bool "ARM Ltd. Versatile family" - select ARM_AMBA - select ARM_VIC - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV - select ICST - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - select NEED_MACH_IO_H if PCI - select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK - select PLAT_VERSATILE_CLCD - select PLAT_VERSATILE_FPGA_IRQ - select ARM_TIMER_SP804 + select ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_VEXPRESS +config ARCH_VEXPRESS_CHOICE bool "ARM Ltd. Versatile Express family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_PATA_PLATFORM - select ICST - select NO_IOPORT - select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD - select REGULATOR_FIXED_VOLTAGE if REGULATOR + select ARCH_VEXPRESS help This enables support for the ARM Ltd Versatile Express boards. -config ARCH_AT91 +config ARCH_AT91_CHOICE bool "Atmel AT91" - select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK - select CLKDEV_LOOKUP - select IRQ_DOMAIN - select NEED_MACH_IO_H if PCCARD + select ARCH_AT91 help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCMRING +config ARCH_BCMRING_CHOICE bool "Broadcom BCMRING" depends on MMU - select CPU_V6 - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB + select ARCH_BCMRING help Support for Broadcom's BCMRing platform. -config ARCH_HIGHBANK +config ARCH_HIGHBANK_CHOICE bool "Calxeda Highbank-based" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_GIC - select ARM_TIMER_SP804 - select CACHE_L2X0 - select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU - select HAVE_SMP - select SPARSE_IRQ - select USE_OF + select ARCH_HIGHBANK help Support for the Calxeda Highbank SoC based boards. -config ARCH_CLPS711X +config ARCH_CLPS711X_CHOICE bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select CPU_ARM720T - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_MEMORY_H + select ARCH_CLPS711X help Support for Cirrus Logic 711x/721x/731x based boards. -config ARCH_CNS3XXX +config ARCH_CNS3XXX_CHOICE bool "Cavium Networks CNS3XXX family" - select CPU_V6K - select GENERIC_CLOCKEVENTS - select ARM_GIC - select MIGHT_HAVE_CACHE_L2X0 - select MIGHT_HAVE_PCI - select PCI_DOMAINS if PCI + select ARCH_CNS3XXX help Support for Cavium Networks CNS3XXX platform. -config ARCH_GEMINI +config ARCH_GEMINI_CHOICE bool "Cortina Systems Gemini" - select CPU_FA526 - select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET + select ARCH_GEMINI help Support for the Cortina Systems Gemini family SoCs -config ARCH_PRIMA2 +config ARCH_PRIMA2_CHOICE bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - select CPU_V7 - select NO_IOPORT - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select GENERIC_IRQ_CHIP - select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select PINCTRL_SIRF - select USE_OF - select ZONE_DMA + select ARCH_PRIMA2 help Support for CSR SiRFSoC ARM Cortex A9 Platform -config ARCH_EBSA110 +config ARCH_EBSA110_CHOICE bool "EBSA-110" - select CPU_SA110 - select ISA - select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H + select ARCH_EBSA110 help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. -config ARCH_EP93XX +config ARCH_EP93XX_CHOICE bool "EP93xx-based" - select CPU_ARM920T - select ARM_AMBA - select ARM_VIC - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_MEMORY_H + select ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs. -config ARCH_FOOTBRIDGE +config ARCH_FOOTBRIDGE_CHOICE bool "FootBridge" - select CPU_SA110 - select FOOTBRIDGE - select GENERIC_CLOCKEVENTS - select HAVE_IDE - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H + select ARCH_FOOTBRIDGE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_MXC +config ARCH_MXC_CHOICE bool "Freescale MXC/iMX-based" - select GENERIC_CLOCKEVENTS - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF + select ARCH_MXC help Support for Freescale MXC/iMX-based family of processors -config ARCH_MXS +config ARCH_MXS_CHOICE bool "Freescale MXS-based" - select GENERIC_CLOCKEVENTS - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select COMMON_CLK - select HAVE_CLK_PREPARE - select PINCTRL - select USE_OF + select ARCH_MXS help Support for Freescale MXS-based family of processors -config ARCH_NETX +config ARCH_NETX_CHOICE bool "Hilscher NetX based" - select CLKSRC_MMIO - select CPU_ARM926T - select ARM_VIC - select GENERIC_CLOCKEVENTS + select ARCH_NETX help This enables support for systems based on the Hilscher NetX Soc -config ARCH_H720X +config ARCH_H720X_CHOICE bool "Hynix HMS720x-based" - select CPU_ARM720T - select ISA_DMA_API - select ARCH_USES_GETTIMEOFFSET + select ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_IOP13XX +config ARCH_IOP13XX_CHOICE bool "IOP13xx-based" depends on MMU - select CPU_XSC3 - select PLAT_IOP - select PCI - select ARCH_SUPPORTS_MSI - select VMSPLIT_1G - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H - select NEED_RET_TO_USER + select ARCH_IOP13XX help Support for Intel's IOP13XX (XScale) family of processors. -config ARCH_IOP32X +config ARCH_IOP32X_CHOICE bool "IOP32x-based" depends on MMU - select CPU_XSCALE - select NEED_MACH_GPIO_H - select NEED_MACH_IO_H - select NEED_RET_TO_USER - select PLAT_IOP - select PCI - select ARCH_REQUIRE_GPIOLIB + select ARCH_IOP32X help Support for Intel's 80219 and IOP32X (XScale) family of processors. -config ARCH_IOP33X +config ARCH_IOP33X_CHOICE bool "IOP33x-based" depends on MMU - select CPU_XSCALE - select NEED_MACH_GPIO_H - select NEED_MACH_IO_H - select NEED_RET_TO_USER - select PLAT_IOP - select PCI - select ARCH_REQUIRE_GPIOLIB + select ARCH_IOP33X help Support for Intel's IOP33X (XScale) family of processors. -config ARCH_IXP4XX +config ARCH_IXP4XX_CHOICE bool "IXP4xx-based" depends on MMU - select ARCH_HAS_DMA_SET_COHERENT_MASK - select CLKSRC_MMIO - select CPU_XSCALE - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_PCI - select NEED_MACH_IO_H - select DMABOUNCE if PCI + select ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. -config ARCH_MVEBU +config ARCH_MVEBU_CHOICE bool "Marvell SOCs with Device Tree support" - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - select COMMON_CLK + select ARCH_MVEBU help Support for the Marvell SoC Family with device tree support -config ARCH_DOVE +config ARCH_DOVE_CHOICE bool "Marvell Dove" - select CPU_V7 - select PCI - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KIRKWOOD +config ARCH_KIRKWOOD_CHOICE bool "Marvell Kirkwood" - select CPU_FEROCEON - select PCI - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select ARCH_KIRKWOOD help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_LPC32XX +config ARCH_LPC32XX_CHOICE bool "NXP LPC32XX" - select CLKSRC_MMIO - select CPU_ARM926T - select ARCH_REQUIRE_GPIOLIB - select HAVE_IDE - select ARM_AMBA - select USB_ARCH_HAS_OHCI - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select USE_OF - select HAVE_PWM + select ARCH_LPC32XX help Support for the NXP LPC32XX family of processors -config ARCH_MV78XX0 +config ARCH_MV78XX0_CHOICE bool "Marvell MV78xx0" - select CPU_FEROCEON - select PCI - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select ARCH_MV78XX0 help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. -config ARCH_ORION5X +config ARCH_ORION5X_CHOICE bool "Marvell Orion" depends on MMU - select CPU_FEROCEON - select PCI - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select ARCH_ORION5X help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), Orion-2 (5281), Orion-1-90 (6183). -config ARCH_MMP +config ARCH_MMP_CHOICE bool "Marvell PXA168/910/MMP2" depends on MMU - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select GPIO_PXA - select IRQ_DOMAIN - select PLAT_PXA - select SPARSE_IRQ - select GENERIC_ALLOCATOR + select ARCH_MMP help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. -config ARCH_KS8695 +config ARCH_KS8695_CHOICE bool "Micrel/Kendin KS8695" - select CPU_ARM922T - select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_MEMORY_H + select ARCH_KS8695 help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. -config ARCH_W90X900 +config ARCH_W90X900_CHOICE bool "Nuvoton W90X900 CPU" - select CPU_ARM926T - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS + select ARCH_W90X900 help Support for Nuvoton (Winbond logic dept.) ARM9 processor, At present, the w90x900 has been renamed nuc900, regarding
@@ -683,74 +472,37 @@ config ARCH_W90X900 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> -config ARCH_TEGRA +config ARCH_TEGRA_CHOICE bool "NVIDIA Tegra" - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select HAVE_CLK - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 - select NEED_MACH_IO_H if PCI - select ARCH_HAS_CPUFREQ - select USE_OF + select ARCH_TEGRA help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). -config ARCH_PICOXCELL +config ARCH_PICOXCELL_CHOICE bool "Picochip picoXcell" - select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select CPU_V6K - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select HAVE_TCM - select NO_IOPORT - select SPARSE_IRQ - select USE_OF + select ARCH_PICOXCELL help This enables support for systems based on the Picochip picoXcell family of Femtocell devices. The picoxcell support requires device tree for all boards. -config ARCH_PNX4008 +config ARCH_PNX4008_CHOICE bool "Philips Nexperia PNX4008 Mobile" - select CPU_ARM926T - select CLKDEV_LOOKUP - select ARCH_USES_GETTIMEOFFSET + select ARCH_PNX4008 help This enables support for Philips PNX4008 mobile platform. -config ARCH_PXA +config ARCH_PXA_CHOICE bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_MTD_XIP - select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS - select GPIO_PXA - select PLAT_PXA - select SPARSE_IRQ - select AUTO_ZRELADDR - select MULTI_IRQ_HANDLER - select ARM_CPU_SUSPEND if PM - select HAVE_IDE + select ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM +config ARCH_MSM_CHOICE bool "Qualcomm MSM" - select HAVE_CLK - select GENERIC_CLOCKEVENTS - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP + select ARCH_MSM help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory
@@ -758,283 +510,121 @@ config ARCH_MSM stack and controls some vital subsystems (clock and power control, etc). -config ARCH_SHMOBILE +config ARCH_SHMOBILE_CHOICE bool "Renesas SH-Mobile / R-Mobile" - select HAVE_CLK - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV - select HAVE_SMP - select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_CACHE_L2X0 - select NO_IOPORT - select SPARSE_IRQ - select MULTI_IRQ_HANDLER - select PM_GENERIC_DOMAINS if PM - select NEED_MACH_MEMORY_H + select ARCH_SHMOBILE help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. -config ARCH_RPC +config ARCH_RPC_CHOICE bool "RiscPC" - select ARCH_ACORN - select FIQ - select ARCH_MAY_HAVE_PC_FDC - select HAVE_PATA_PLATFORM - select ISA_DMA_API - select NO_IOPORT - select ARCH_SPARSEMEM_ENABLE - select ARCH_USES_GETTIMEOFFSET - select HAVE_IDE - select NEED_MACH_IO_H - select NEED_MACH_MEMORY_H + select ARCH_RPC help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. -config ARCH_SA1100 +config ARCH_SA1100_CHOICE bool "SA1100-based" - select CLKSRC_MMIO - select CPU_SA1100 - select ISA - select ARCH_SPARSEMEM_ENABLE - select ARCH_MTD_XIP - select ARCH_HAS_CPUFREQ - select CPU_FREQ - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select HAVE_IDE - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H - select SPARSE_IRQ + select ARCH_SA1100 help Support for StrongARM 11x0 based boards. -config ARCH_S3C24XX +config ARCH_S3C24XX_CHOICE bool "Samsung S3C24XX SoCs" - select GENERIC_GPIO - select ARCH_HAS_CPUFREQ - select HAVE_CLK - select CLKDEV_LOOKUP - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H - select NEED_MACH_IO_H + select ARCH_S3C24XX help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). -config ARCH_S3C64XX +config ARCH_S3C64XX_CHOICE bool "Samsung S3C64XX" - select PLAT_SAMSUNG - select CPU_V6 - select ARM_VIC - select HAVE_CLK - select HAVE_TCM - select CLKDEV_LOOKUP - select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select SAMSUNG_CLKSRC - select SAMSUNG_IRQ_VIC_TIMER - select S3C_GPIO_TRACK - select S3C_DEV_NAND - select USB_ARCH_HAS_OHCI - select SAMSUNG_GPIOLIB_4BIT - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H + select ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P64X0 +config ARCH_S5P64X0_CHOICE bool "Samsung S5P6440 S5P6450" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H + select ARCH_S5P64X0 help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5PC100 +config ARCH_S5PC100_CHOICE bool "Samsung S5PC100" - select GENERIC_GPIO - select HAVE_CLK - select CLKDEV_LOOKUP - select CPU_V7 - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H + select ARCH_S5PC100 help Samsung S5PC100 series based systems -config ARCH_S5PV210 +config ARCH_S5PV210_CHOICE bool "Samsung S5PV210/S5PC110" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE - select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK - select CLKDEV_LOOKUP - select CLKSRC_MMIO - select ARCH_HAS_CPUFREQ - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H + select ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS +config ARCH_EXYNOS_CHOICE bool "SAMSUNG EXYNOS" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE - select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK - select CLKDEV_LOOKUP - select ARCH_HAS_CPUFREQ - select GENERIC_CLOCKEVENTS - select HAVE_S3C_RTC if RTC_CLASS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H + select ARCH_EXYNOS help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) -config ARCH_SHARK +config ARCH_SHARK_CHOICE bool "Shark" - select CPU_SA110 - select ISA - select ISA_DMA - select ZONE_DMA - select PCI - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_MEMORY_H - select NEED_MACH_IO_H + select ARCH_SHARK help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). -config ARCH_U300 +config ARCH_U300_CHOICE bool "ST-Ericsson U300 Series" depends on MMU - select CLKSRC_MMIO - select CPU_ARM926T - select HAVE_TCM - select ARM_AMBA - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select COMMON_CLK - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB + select ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. -config ARCH_U8500 +config ARCH_U8500_CHOICE bool "ST-Ericsson U8500 Series" depends on MMU - select CPU_V7 - select ARM_AMBA - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_CPUFREQ - select HAVE_SMP - select MIGHT_HAVE_CACHE_L2X0 + select ARCH_U8500 help Support for ST-Ericsson's Ux500 architecture -config ARCH_NOMADIK +config ARCH_NOMADIK_CHOICE bool "STMicroelectronics Nomadik" - select ARM_AMBA - select ARM_VIC - select CPU_ARM926T - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select PINCTRL - select MIGHT_HAVE_CACHE_L2X0 - select ARCH_REQUIRE_GPIOLIB + select ARCH_NOMADIK help Support for the Nomadik platform by ST-Ericsson -config ARCH_DAVINCI +config ARCH_DAVINCI_CHOICE bool "TI DaVinci" - select GENERIC_CLOCKEVENTS - select ARCH_REQUIRE_GPIOLIB - select ZONE_DMA - select HAVE_IDE - select CLKDEV_LOOKUP - select GENERIC_ALLOCATOR - select GENERIC_IRQ_CHIP - select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_DAVINCI select NEED_MACH_GPIO_H help Support for TI's DaVinci platform. -config ARCH_OMAP +config ARCH_OMAP_CHOICE bool "TI OMAP" depends on MMU - select HAVE_CLK - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_CPUFREQ - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_OMAP help Support for TI's OMAP platform (OMAP1/2/3/4). -config PLAT_SPEAR +config PLAT_SPEAR_CHOICE bool "ST SPEAr" - select ARM_AMBA - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select COMMON_CLK - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS - select HAVE_CLK + select PLAT_SPEAR help Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). -config ARCH_VT8500 +config ARCH_VT8500_CHOICE bool "VIA/WonderMedia 85xx" - select CPU_ARM926T - select GENERIC_GPIO - select ARCH_HAS_CPUFREQ - select GENERIC_CLOCKEVENTS - select ARCH_REQUIRE_GPIOLIB + select ARCH_VT8500 help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. -config ARCH_ZYNQ +config ARCH_ZYNQ_CHOICE bool "Xilinx Zynq ARM Cortex A9 Platform" - select CPU_V7 - select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARM_GIC - select ARM_AMBA - select ICST - select MIGHT_HAVE_CACHE_L2X0 - select USE_OF + select ARCH_ZYNQ help Support for Xilinx Zynq ARM Cortex A9 Platform endchoice
@@ -1058,6 +648,8 @@ source "arch/arm/mach-davinci/Kconfig" source "arch/arm/mach-dove/Kconfig" +source "arch/arm/mach-ebsa110/Kconfig" + source "arch/arm/mach-ep93xx/Kconfig" source "arch/arm/mach-footbridge/Kconfig"
@@ -1066,6 +658,8 @@ source "arch/arm/mach-gemini/Kconfig" source "arch/arm/mach-h720x/Kconfig" +source "arch/arm/mach-highbank/Kconfig" + source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-iop32x/Kconfig"
@@ -1080,6 +674,8 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-lpc32xx/Kconfig" + source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig"
@@ -1101,6 +697,10 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" +source "arch/arm/mach-picoxcell/Kconfig" + +source "arch/arm/mach-pnx4008/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/plat-pxa/Kconfig"
@@ -1108,11 +708,17 @@ source "arch/arm/mach-mmp/Kconfig" source "arch/arm/mach-realview/Kconfig" +source "arch/arm/mach-rpc/Kconfig" + source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/mach-shark/Kconfig" + +source "arch/arm/mach-socfpga/Kconfig" + source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig"
@@ -1121,9 +727,7 @@ source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2440/Kconfig" endif -if ARCH_S3C64XX source "arch/arm/mach-s3c64xx/Kconfig" -endif source "arch/arm/mach-s5p64x0/Kconfig"
@@ -1150,6 +754,8 @@ source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" +source "arch/arm/mach-zynq/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool
arch/arm/mach-at91/Kconfig +8 -0
@@ -1,3 +1,11 @@ +config ARCH_AT91 + bool + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select HAVE_CLK + select IRQ_DOMAIN + select NEED_MACH_IO_H if PCCARD + if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD
arch/arm/mach-bcmring/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_BCMRING + bool + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select CPU_V6 + select GENERIC_CLOCKEVENTS + choice prompt "Processor selection in BCMRING family of devices" depends on ARCH_BCMRING
arch/arm/mach-clps711x/Kconfig +6 -0
@@ -1,3 +1,9 @@ +config ARCH_CLPS711X + bool + select ARCH_USES_GETTIMEOFFSET + select CPU_ARM720T + select NEED_MACH_MEMORY_H + if ARCH_CLPS711X menu "CLPS711X/EP721X/EP731X Implementations"
arch/arm/mach-cns3xxx/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_CNS3XXX + bool + select CPU_V6K + select GENERIC_CLOCKEVENTS + select ARM_GIC + select MIGHT_HAVE_CACHE_L2X0 + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + menu "CNS3XXX platform type" depends on ARCH_CNS3XXX
arch/arm/mach-davinci/Kconfig +12 -0
@@ -1,3 +1,15 @@ +config ARCH_DAVINCI + bool + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select HAVE_IDE + select NEED_MACH_GPIO_H + select ZONE_DMA + if ARCH_DAVINCI config AINTC
arch/arm/mach-dove/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_DOVE + bool + select ARCH_REQUIRE_GPIOLIB + select CPU_V7 + select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H + select PCI + select PLAT_ORION + if ARCH_DOVE menu "Marvell Dove Implementations"
arch/arm/mach-ebsa110/Kconfig new file +9 -0
@@ -0,0 +1,9 @@ +config ARCH_EBSA110 + bool + select CPU_SA110 + select ISA + select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H +
arch/arm/mach-ep93xx/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_EP93XX + bool + select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_USES_GETTIMEOFFSET + select ARM_AMBA + select ARM_VIC + select CLKDEV_LOOKUP + select CPU_ARM920T + select NEED_MACH_MEMORY_H + if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options"
arch/arm/mach-exynos/Kconfig +16 -0
@@ -7,6 +7,22 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + bool + select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select CLKDEV_LOOKUP + select CPU_V7 + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H + select NEED_MACH_MEMORY_H + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support"
arch/arm/mach-footbridge/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_FOOTBRIDGE + bool + select CPU_SA110 + select FOOTBRIDGE + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + if ARCH_FOOTBRIDGE menu "Footbridge Implementations"
arch/arm/mach-gemini/Kconfig +6 -0
@@ -1,3 +1,9 @@ +config ARCH_GEMINI + bool + select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB + select CPU_FA526 + if ARCH_GEMINI menu "Cortina Systems Gemini Implementations"
arch/arm/mach-h720x/Kconfig +6 -0
@@ -1,3 +1,9 @@ +config ARCH_H720X + bool + select CPU_ARM720T + select ISA_DMA_API + select ARCH_USES_GETTIMEOFFSET + if ARCH_H720X menu "h720x Implementations"
arch/arm/mach-highbank/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +config ARCH_HIGHBANK + bool + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU + select HAVE_SMP + select SPARSE_IRQ + select USE_OF
arch/arm/mach-integrator/Kconfig +16 -0
@@ -1,3 +1,19 @@ +config ARCH_INTEGRATOR + bool + select ARM_AMBA + select ARCH_HAS_CPUFREQ + select COMMON_CLK + select CLK_VERSATILE + select HAVE_TCM + select ICST + select GENERIC_CLOCKEVENTS + select PLAT_VERSATILE + select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + select SPARSE_IRQ + select MULTI_IRQ_HANDLER + if ARCH_INTEGRATOR menu "Integrator Options"
arch/arm/mach-iop13xx/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_IOP13XX + bool + select CPU_XSC3 + select PLAT_IOP + select PCI + select ARCH_SUPPORTS_MSI + select VMSPLIT_1G + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H + select NEED_RET_TO_USER + if ARCH_IOP13XX menu "IOP13XX Implementation Options"
arch/arm/mach-iop32x/Kconfig +10 -0
@@ -1,3 +1,13 @@ +config ARCH_IOP32X + bool + select CPU_XSCALE + select NEED_MACH_GPIO_H + select NEED_MACH_IO_H + select NEED_RET_TO_USER + select PLAT_IOP + select PCI + select ARCH_REQUIRE_GPIOLIB + if ARCH_IOP32X menu "IOP32x Implementation Options"
arch/arm/mach-iop33x/Kconfig +10 -0
@@ -1,3 +1,13 @@ +config ARCH_IOP33X + bool + select CPU_XSCALE + select NEED_MACH_GPIO_H + select NEED_MACH_IO_H + select NEED_RET_TO_USER + select PLAT_IOP + select PCI + select ARCH_REQUIRE_GPIOLIB + if ARCH_IOP33X menu "IOP33x Implementation Options"
arch/arm/mach-ixp4xx/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_IXP4XX + bool + select ARCH_HAS_DMA_SET_COHERENT_MASK + select CLKSRC_MMIO + select CPU_XSCALE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI + select NEED_MACH_IO_H + select DMABOUNCE if PCI + if ARCH_IXP4XX config ARCH_SUPPORTS_BIG_ENDIAN
arch/arm/mach-kirkwood/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_KIRKWOOD + bool + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H + select PCI + select PLAT_ORION + if ARCH_KIRKWOOD menu "Marvell Kirkwood Implementations"
arch/arm/mach-ks8695/Kconfig +7 -0
@@ -1,3 +1,10 @@ +config ARCH_KS8695 + bool + select ARCH_USES_GETTIMEOFFSET + select ARCH_REQUIRE_GPIOLIB + select CPU_ARM922T + select NEED_MACH_MEMORY_H + if ARCH_KS8695 menu "Kendin/Micrel KS8695 Implementations"
arch/arm/mach-lpc32xx/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +config ARCH_LPC32XX + bool + select CLKSRC_MMIO + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE + select ARM_AMBA + select USB_ARCH_HAS_OHCI + select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select USE_OF + select HAVE_PWM
arch/arm/mach-mmp/Kconfig +12 -0
@@ -1,3 +1,15 @@ +config ARCH_MMP + bool + depends on MMU + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select GPIO_PXA + select IRQ_DOMAIN + select PLAT_PXA + select SPARSE_IRQ + select GENERIC_ALLOCATOR + if ARCH_MMP menu "Marvell PXA168/910/MMP2 Implmentations"
arch/arm/mach-msm/Kconfig +7 -0
@@ -1,3 +1,10 @@ +config ARCH_MSM + bool + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_CLK + if ARCH_MSM choice
arch/arm/mach-mv78xx0/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_MV78XX0 + bool + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H + select PCI + select PLAT_ORION + if ARCH_MV78XX0 menu "Marvell MV78xx0 Implementations"
arch/arm/mach-mvebu/Kconfig +10 -0
@@ -1,3 +1,13 @@ +config ARCH_MVEBU + bool + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + if ARCH_MVEBU menu "Marvell SOC with device tree"
arch/arm/mach-mxs/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_MXS + bool + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK_PREPARE + select PINCTRL + select USE_OF + if ARCH_MXS source "arch/arm/mach-mxs/devices/Kconfig"
arch/arm/mach-netx/Kconfig +7 -0
@@ -1,3 +1,10 @@ +config ARCH_NETX + bool + select ARM_VIC + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + menu "NetX Implementations" depends on ARCH_NETX
arch/arm/mach-nomadik/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_NOMADIK + bool + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_VIC + select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + if ARCH_NOMADIK menu "Nomadik boards"
arch/arm/mach-orion5x/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_ORION5X + bool + select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON + select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H + select PCI + select PLAT_ORION + if ARCH_ORION5X menu "Orion Implementations"
arch/arm/mach-picoxcell/Kconfig new file +14 -0
@@ -0,0 +1,14 @@ +config ARCH_PICOXCELL + bool + select ARCH_REQUIRE_GPIOLIB + select ARM_PATCH_PHYS_VIRT + select ARM_VIC + select CPU_V6K + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_TCM + select NO_IOPORT + select SPARSE_IRQ + select USE_OF
arch/arm/mach-pnx4008/Kconfig new file +5 -0
@@ -0,0 +1,5 @@ +config ARCH_PNX4008 + bool + select CPU_ARM926T + select CLKDEV_LOOKUP + select ARCH_USES_GETTIMEOFFSET
arch/arm/mach-pxa/Kconfig +16 -0
@@ -1,3 +1,19 @@ +config ARCH_PXA + bool + select ARCH_HAS_CPUFREQ + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARM_CPU_SUSPEND if PM + select AUTO_ZRELADDR + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GPIO_PXA + select HAVE_IDE + select MULTI_IRQ_HANDLER + select PLAT_PXA + select SPARSE_IRQ + if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations"
arch/arm/mach-realview/Kconfig +15 -0
@@ -1,3 +1,18 @@ +config ARCH_REALVIEW + bool + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select HAVE_MACH_CLKDEV + select ICST + select NEED_MACH_MEMORY_H + select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK + select PLAT_VERSATILE_CLCD + menu "RealView platform type" depends on ARCH_REALVIEW
arch/arm/mach-rpc/Kconfig new file +13 -0
@@ -0,0 +1,13 @@ +config ARCH_RPC + bool + select ARCH_ACORN + select FIQ + select ARCH_MAY_HAVE_PC_FDC + select HAVE_PATA_PLATFORM + select ISA_DMA_API + select NO_IOPORT + select ARCH_SPARSEMEM_ENABLE + select ARCH_USES_GETTIMEOFFSET + select HAVE_IDE + select NEED_MACH_IO_H + select NEED_MACH_MEMORY_H
arch/arm/mach-s3c24xx/Kconfig +13 -0
@@ -7,6 +7,19 @@ # # Licensed under GPLv2 +config ARCH_S3C24XX + bool + select ARCH_HAS_CPUFREQ + select ARCH_USES_GETTIMEOFFSET + select CLKDEV_LOOKUP + select GENERIC_GPIO + select HAVE_CLK + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H + select NEED_MACH_IO_H + if ARCH_S3C24XX menu "SAMSUNG S3C24XX SoCs Support"
arch/arm/mach-s3c64xx/Kconfig +26 -0
@@ -3,6 +3,30 @@ # # Licensed under GPLv2 +config ARCH_S3C64XX + bool + select PLAT_SAMSUNG + select CPU_V6 + select ARM_VIC + select HAVE_CLK + select HAVE_TCM + select CLKDEV_LOOKUP + select NO_IOPORT + select ARCH_USES_GETTIMEOFFSET + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select SAMSUNG_CLKSRC + select SAMSUNG_IRQ_VIC_TIMER + select S3C_GPIO_TRACK + select S3C_DEV_NAND + select USB_ARCH_HAS_OHCI + select SAMSUNG_GPIOLIB_4BIT + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H + +if ARCH_S3C64XX + # temporary until we can eliminate all drivers using it. config PLAT_S3C64XX bool
@@ -307,3 +331,5 @@ config MACH_WLF_CRAGG_6410 select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. + +endif
arch/arm/mach-s5p64x0/Kconfig +13 -0
@@ -5,6 +5,19 @@ # # Licensed under GPLv2 +config ARCH_S5P64X0 + bool + select CPU_V6 + select GENERIC_GPIO + select HAVE_CLK + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select GENERIC_CLOCKEVENTS + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select NEED_MACH_GPIO_H + if ARCH_S5P64X0 config CPU_S5P6440
arch/arm/mach-s5pc100/Kconfig +12 -0
@@ -5,6 +5,18 @@ # Configuration options for the S5PC100 CPU +config ARCH_S5PC100 + bool + select GENERIC_GPIO + select HAVE_CLK + select CLKDEV_LOOKUP + select CPU_V7 + select ARCH_USES_GETTIMEOFFSET + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H + if ARCH_S5PC100 config CPU_S5PC100
arch/arm/mach-s5pv210/Kconfig +17 -0
@@ -7,6 +7,23 @@ # Configuration options for the S5PV210/S5PC110 +config ARCH_S5PV210 + bool + select CPU_V7 + select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL + select GENERIC_GPIO + select HAVE_CLK + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C_RTC if RTC_CLASS + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H + select NEED_MACH_MEMORY_H + if ARCH_S5PV210 config CPU_S5PV210
arch/arm/mach-sa1100/Kconfig +17 -0
@@ -1,3 +1,20 @@ +config ARCH_SA1100 + bool + select CLKSRC_MMIO + select CPU_SA1100 + select ISA + select ARCH_SPARSEMEM_ENABLE + select ARCH_MTD_XIP + select ARCH_HAS_CPUFREQ + select CPU_FREQ + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE + select NEED_MACH_GPIO_H + select NEED_MACH_MEMORY_H + select SPARSE_IRQ + if ARCH_SA1100 menu "SA11x0 Implementations"
arch/arm/mach-shark/Kconfig new file +11 -0
@@ -0,0 +1,11 @@ +config ARCH_SHARK + bool + select CPU_SA110 + select ISA + select ISA_DMA + select ZONE_DMA + select PCI + select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H +
arch/arm/mach-shmobile/Kconfig +14 -0
@@ -1,3 +1,17 @@ +config ARCH_SHMOBILE + bool + select HAVE_CLK + select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV + select HAVE_SMP + select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT + select SPARSE_IRQ + select MULTI_IRQ_HANDLER + select PM_GENERIC_DOMAINS if PM + select NEED_MACH_MEMORY_H + if ARCH_SHMOBILE comment "SH-Mobile System Type"
arch/arm/mach-socfpga/Kconfig new file +16 -0
@@ -0,0 +1,16 @@ +config ARCH_SOCFPGA + bool + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU + select SPARSE_IRQ + select USE_OF
arch/arm/mach-tegra/Kconfig +13 -0
@@ -1,3 +1,16 @@ +config ARCH_TEGRA + bool + select ARCH_HAS_CPUFREQ + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + select NEED_MACH_IO_H if PCI + select USE_OF + if ARCH_TEGRA comment "NVIDIA Tegra options"
arch/arm/mach-u300/Kconfig +14 -0
@@ -1,3 +1,17 @@ +config ARCH_U300 + bool + select CLKSRC_MMIO + select CPU_ARM926T + select HAVE_TCM + select ARM_AMBA + select ARM_PATCH_PHYS_VIRT + select ARM_VIC + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select COMMON_CLK + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + if ARCH_U300 menu "ST-Ericsson AB U300/U330/U335/U365 Platform"
arch/arm/mach-ux500/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_U8500 + bool + select CPU_V7 + select ARM_AMBA + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_CPUFREQ + select HAVE_SMP + select MIGHT_HAVE_CACHE_L2X0 + if ARCH_U8500 config UX500_SOC_COMMON
arch/arm/mach-versatile/Kconfig +16 -0
@@ -1,3 +1,19 @@ +config ARCH_VERSATILE + bool + select ARM_AMBA + select ARM_VIC + select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV + select ICST + select GENERIC_CLOCKEVENTS + select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI + select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK + select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_FPGA_IRQ + select ARM_TIMER_SP804 + menu "Versatile platform type" depends on ARCH_VERSATILE
arch/arm/mach-vexpress/Kconfig +16 -0
@@ -1,3 +1,19 @@ +config ARCH_VEXPRESS + bool + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_PATA_PLATFORM + select ICST + select NO_IOPORT + select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD + select REGULATOR_FIXED_VOLTAGE if REGULATOR + menu "Versatile Express platform type" depends on ARCH_VEXPRESS
arch/arm/mach-vt8500/Kconfig +8 -0
@@ -1,3 +1,11 @@ +config ARCH_VT8500 + bool + select CPU_ARM926T + select GENERIC_GPIO + select ARCH_HAS_CPUFREQ + select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB + if ARCH_VT8500 config VTWM_VERSION_VT8500
arch/arm/mach-w90x900/Kconfig +8 -0
@@ -1,3 +1,11 @@ +config ARCH_W90X900 + bool + select CPU_ARM926T + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + if ARCH_W90X900 config CPU_W90P910
arch/arm/mach-zynq/Kconfig new file +10 -0
@@ -0,0 +1,10 @@ +config ARCH_ZYNQ + bool + select CPU_V7 + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARM_GIC + select ARM_AMBA + select ICST + select MIGHT_HAVE_CACHE_L2X0 + select USE_OF
arch/arm/plat-mxc/Kconfig +11 -0
@@ -1,3 +1,14 @@ +config ARCH_MXC + bool + select GENERIC_CLOCKEVENTS + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF + if ARCH_MXC source "arch/arm/plat-mxc/devices/Kconfig"
arch/arm/plat-omap/Kconfig +9 -0
@@ -1,3 +1,12 @@ +config ARCH_OMAP + bool + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_CPUFREQ + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select ARCH_HAS_HOLES_MEMORYMODEL + if ARCH_OMAP menu "TI OMAP Common Features"
arch/arm/plat-spear/Kconfig +9 -0
@@ -1,6 +1,15 @@ # # SPEAr Platform configuration file # +config PLAT_SPEAR + bool + select ARM_AMBA + select ARCH_REQUIRE_GPIOLIB + select CLKDEV_LOOKUP + select COMMON_CLK + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS + select HAVE_CLK if PLAT_SPEAR
Signature · 1 line
1.7.9.5
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 7 lines · Rob Herring
In preparation for mulit-platform support, convert all platforms'
ARCH_definition to a hidden option and create a new choice option.Signed-off-by Rob Herring <[email protected]>--- arch/arm/Kconfig | 650 ++++++++------------------------------
<snip>
Quoted 1 line
arch/arm/mach-ep93xx/Kconfig| 11 +
<snip>
Quoted 2 lines
arch/arm/Kconfig +0
-0
<snip>
Quoted 14 lines
arch/arm/Kconfig +2
-9-config ARCH_EP93XX +config ARCH_EP93XX_CHOICE bool "EP93xx-based" - select CPU_ARM920T - select ARM_AMBA - select ARM_VIC - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_USES_GETTIMEOFFSET - select NEED_MACH_MEMORY_H + select ARCH_EP93XX help This enables support for the Cirrus EP93xx series of CPUs.
<snip>
Quoted 9 lines
arch/arm/mach-ep93xx/Kconfig +4
-0@@ -1,3 +1,14 @@ +config ARCH_EP93XX + bool + select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL
arch/arm/mach-ep93xx/Kconfig line 14
Quoted 10 lines
arch/arm/mach-ep93xx/Kconfig +7
-0+ select ARCH_USES_GETTIMEOFFSET + select ARM_AMBA + select ARM_VIC + select CLKDEV_LOOKUP + select CPU_ARM920T + select NEED_MACH_MEMORY_H + if ARCH_EP93XX menu "Cirrus EP93xx Implementation Options"
Curious... Why did you rearrange the select's? There "almost" alphabetic now, but not quite...
But, FWIW, for the EP93xx part:
Thanks
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
In reply to Rob HerringQuoted 4 lines · Rob Herring
From: Rob Herring <[email protected]>
In preparation for mulit-platform support, convert all platforms'
ARCH_definition to a hidden option and create a new choice option.
This is churn and annoyance. It's definitely annoyance for the autobuilder because it's going to have to have symbols changed in the seed configs. It's annoyance for people because they're going to have to manually reselect their SoC types in every build they do.
I think also that Kconfig will end up on 'make oldconfig' selecting one of the platforms, deselecting all the dependencies on that platform, which then means you'll have thousands of Kconfig options to answer.
I've been there with x86 configs, and spent something like an hour piecing together a configuration for my laptop, answering one question every couple of seconds. That is not a nice experience to inflict on people.
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 11 lines · Russell King - ARM Linux
Quoted 4 lines · Rob Herring
From: Rob Herring <[email protected]>
In preparation for mulit-platform support, convert all platforms'
ARCH_definition to a hidden option and create a new choice option.This is churn and annoyance. It's definitely annoyance for the autobuilder because it's going to have to have symbols changed in the seed configs. It's annoyance for people because they're going to have to manually reselect their SoC types in every build they do.
Quoted 8 lines
I think also that
Kconfigwill end up on 'make oldconfig' selecting one of the platforms, deselecting all the dependencies on that platform, which then means you'll have thousands ofKconfigoptions to answer.I've been there with x86 configs, and spent something like an hour piecing together a configuration for my laptop, answering one question every couple of seconds. That is not a nice experience to inflict on people.
Then what do you suggest? I can think of a few alternatives.
Leave the current name and make the hidden option a new name like ARCH_xx_OPTIONS. This would require renaming ARCH_xxx for each platform all over the tree. I don't care to sign up for that task...
Move platforms one by one out of the choice as they are converted. I can't think of a reason for a platform to be in both places except we would have to figure out something for getting DEBUG_LL to work.
Rob
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 5 lines · Rob Herring
Then what do you suggest? I can think of a few alternatives.
Leave the current name and make the hidden option a new name like
ARCH_xx_OPTIONS. This would require renamingARCH_xxxfor each platform all over the tree. I don't care to sign up for that task...
Well, requiring everyone to spend hours redoing their configuration also isn't practical either.
Quoted 3 lines
Move platforms one by one out of the choice as they are converted. I can't think of a reason for a platform to be in both places except we would have to figure out something for getting
DEBUG_LLto work.
No you don't. We've already decided how we're going to deal with DEBUG_LL, and we are _not_ going to make that multi-platform. You select one of the output options, and that is it. We've already been moving in that direction, albiet slowly. Again, anyone who wants to be part of a multiplatform kernel better use the provided choice or they will get no DEBUG_LL facility - simples.
That also means we can start to think about moving the mach/debug-macros.S header elsewhere, remembering that this facility is shared between the decompressor for debugging and the kernel.
Remember that DEBUG_LL is the low-level *debug* facility. It is not the early console, even if it ended up being used as such (which is not something I really care for.) Read the previous discussions on this subject if you disagree, but I'm not changing my position over DEBUG_LL because that will just require me to re-invent the facility yet again (which is what DEBUG_LL is there to stop.) It was _never_ intended to be an early console facility.
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 14 lines · Russell King - ARM Linux
Quoted 5 lines · Rob Herring
Then what do you suggest? I can think of a few alternatives.
Leave the current name and make the hidden option a new name like
ARCH_xx_OPTIONS. This would require renamingARCH_xxxfor each platform all over the tree. I don't care to sign up for that task...Well, requiring everyone to spend hours redoing their configuration also isn't practical either.
Quoted 3 lines
Move platforms one by one out of the choice as they are converted. I can't think of a reason for a platform to be in both places except we would have to figure out something for getting
DEBUG_LLto work.
Quoted 6 lines
No you don't. We've already decided how we're going to deal with
DEBUG_LL, and we are _not_ going to make that multi-platform. You select one of the output options, and that is it. We've already been moving in that direction, albiet slowly. Again, anyone who wants to be part of a multiplatform kernel better use the provided choice or they will get noDEBUG_LLfacility - simples.
Right. The problem is with current patches (and Arnd's version) you cannot select even 1 DEBUG_LL choice as mach/debug-macro.S is not in the include path any more when multi-plat is enabled. If we move platforms out of the choice, then we need some way to enable DEBUG_LL.
Quoted 4 lines
That also means we can start to think about moving the
mach/debug-macros.Sheader elsewhere, remembering that this facility is shared between the decompressor for debugging and the kernel.
I was thinking we could convert the phys and virt addresses to config values and then the DEBUG_LL choices could just be "Use PL01x uart" and "Use 8250 uart". This would cut down the number of debug-macro.S files and choices.
Using a fixed virtual address for all platforms might also help simplify DEBUG_LL.
But I'd like to find a more simple solution to get past enabling multi-platform and deal with a more complex change later.
Rob
Quoted 8 lines
Remember that
DEBUG_LLis the low-level *debug* facility. It is not the early console, even if it ended up being used as such (which is not something I really care for.) Read the previous discussions on this subject if you disagree, but I'm not changing my position overDEBUG_LLbecause that will just require me to re-invent the facility yet again (which is whatDEBUG_LLis there to stop.) It was _never_ intended to be an early console facility.
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 5 lines · Rob Herring
Quoted 3 lines · Russell King - ARM Linux
That also means we can start to think about moving the
mach/debug-macros.Sheader elsewhere, remembering that this facility is shared between the decompressor for debugging and the kernel.
Quoted 7 lines
I was thinking we could convert the phys and virt addresses to config values and then the
DEBUG_LLchoices could just be "Use PL01x uart" and "Use 8250 uart". This would cut down the number ofdebug-macro.Sfiles and choices.Using a fixed virtual address for all platforms might also help simplify
DEBUG_LL.
No it won't, that comment says you totally don't understand the feature you're playing with to me.
It's not only about virtual addresses, it's about physical addresses too, and we can't dictate that all hardware exposes a UART at any particular physical address.
Remember that the code provided by DEBUG_LL is used in the early kernel bring up to set up the phys:virt mapping for the UART, it's also used by the early kernel code to access the UART at the physical address, and by the decompressor to also access the UART at the physical address.
So playing around with fixing it at a specific virtual address is total poppycock, and is completely worthless.
I think what we need is arch/arm/include/debug, move the platform specific debug-macros headers into there, named using platform specific file names. Then we have the config system define a string-based config:
config DEBUG_LL_INCLUDE
string default "<debug/icedcc.S>" if DEBUG_ICEDCC default "<debug/msm.S>" if DEBUG_MSM_UART1 || DEBUG_MSM_UART2 || DEBUG_MSM_UART3
... etc ...
default "mach/debug-macros.S"
And then we can have the various assembly codes do:
#include CONFIG_DEBUG_LL_INCLUDE
Not only does this give a migration path, but it also gives folk a reason to move to the 'new way' if they want to be part of a multi-platform kernel - and it's a trivial thing to do. Just move the include file, add an entry to the DEBUG_LL_INCLUDE entry and the "Kernel low-level debugging port" choice statement, and job done for both non-multi-platform and multi-platform kernels.
What's even nicer about this approach is it doesn't require everyone to change simultaneously - it can be done progressively as required.
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 23 lines · Russell King - ARM Linux
I think what we need is
arch/arm/include/debug, move the platform specific debug-macros headers into there, named using platform specific file names. Then we have the config system define a string-based config:config
DEBUG_LL_INCLUDEstring default "<debug/icedcc.S>" if DEBUG_ICEDCC default "<debug/msm.S>" if DEBUG_MSM_UART1 || DEBUG_MSM_UART2 || DEBUG_MSM_UART3... etc ...
default "mach/debug-macros.S"And then we can have the various assembly codes do:
#include
CONFIG_DEBUG_LL_INCLUDENot only does this give a migration path, but it also gives folk a reason to move to the 'new way' if they want to be part of a multi-platform kernel - and it's a trivial thing to do. Just move the include file, add an entry to the
DEBUG_LL_INCLUDEentry and the "Kernel low-level debugging port" choice statement, and job done for both non-multi-platform and multi-platform kernels.
Quoted 2 lines
What's even nicer about this approach is it doesn't require everyone to change simultaneously - it can be done progressively as required.
This means that:
1) DEBUG_LL console is specified statically (it's a debug option so you are supposed to be already building the kernel, right?)
2) It's not portable across incompatible SoCs so it must really stay disabled on production multi-platform kernels.
Regards,
Domenico
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 24 lines · Domenico Andreoli
Quoted 23 lines · Russell King - ARM Linux
I think what we need is
arch/arm/include/debug, move the platform specific debug-macros headers into there, named using platform specific file names. Then we have the config system define a string-based config:config
DEBUG_LL_INCLUDEstring default "<debug/icedcc.S>" if DEBUG_ICEDCC default "<debug/msm.S>" if DEBUG_MSM_UART1 || DEBUG_MSM_UART2 || DEBUG_MSM_UART3... etc ...
default "mach/debug-macros.S"And then we can have the various assembly codes do:
#include
CONFIG_DEBUG_LL_INCLUDENot only does this give a migration path, but it also gives folk a reason to move to the 'new way' if they want to be part of a multi-platform kernel - and it's a trivial thing to do. Just move the include file, add an entry to the
DEBUG_LL_INCLUDEentry and the "Kernel low-level debugging port" choice statement, and job done for both non-multi-platform and multi-platform kernels.
Quoted 4 lines
Quoted 2 lines
What's even nicer about this approach is it doesn't require everyone to change simultaneously - it can be done progressively as required.
This means that:
I'm not about to re-open the debate again. Please go back and read the previous discussions during the last year about this where eventually agreement on this way forward was reached. Thanks.
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 25 lines · Russell King - ARM Linux
Quoted 24 lines · Domenico Andreoli
Quoted 23 lines · Russell King - ARM Linux
I think what we need is
arch/arm/include/debug, move the platform specific debug-macros headers into there, named using platform specific file names. Then we have the config system define a string-based config:config
DEBUG_LL_INCLUDEstring default "<debug/icedcc.S>" if DEBUG_ICEDCC default "<debug/msm.S>" if DEBUG_MSM_UART1 || DEBUG_MSM_UART2 || DEBUG_MSM_UART3... etc ...
default "mach/debug-macros.S"And then we can have the various assembly codes do:
#include
CONFIG_DEBUG_LL_INCLUDENot only does this give a migration path, but it also gives folk a reason to move to the 'new way' if they want to be part of a multi-platform kernel - and it's a trivial thing to do. Just move the include file, add an entry to the
DEBUG_LL_INCLUDEentry and the "Kernel low-level debugging port" choice statement, and job done for both non-multi-platform and multi-platform kernels.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
What's even nicer about this approach is it doesn't require everyone to change simultaneously - it can be done progressively as required.
This means that:
I'm not about to re-open the debate again. Please go back and read the previous discussions during the last year about this where eventually agreement on this way forward was reached. Thanks.
I don't want to reopen anything, it's only that I've clearly missed the discussion (*) as also my patches in the area may show (**). So I really wanted to understand if, for once, I've understood the thing correctly.
cheers,
Domenico
(*) I would have appreciated if you had pointed it to me in the only comment you made on those patches but that's ok, it has been fun anyway
(**) http://lists.infradead.org/pipermail/linux-arm-kernel/2012-July/109457.html
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
In reply to Russell King - ARM LinuxQuoted 11 lines · Russell King - ARM Linux
Quoted 10 lines · Rob Herring
Quoted 3 lines · Russell King - ARM Linux
That also means we can start to think about moving the
mach/debug-macros.Sheader elsewhere, remembering that this facility is shared between the decompressor for debugging and the kernel.I was thinking we could convert the phys and virt addresses to config values and then the
DEBUG_LLchoices could just be "Use PL01x uart" and "Use 8250 uart". This would cut down the number ofdebug-macro.Sfiles and choices.
Quoted 5 lines
Quoted 2 lines
Using a fixed virtual address for all platforms might also help simplify
DEBUG_LL.No it won't, that comment says you totally don't understand the feature you're playing with to me.
Or you don't understand what I meant.
Quoted 3 lines
It's not only about virtual addresses, it's about physical addresses too, and we can't dictate that all hardware exposes a UART at any particular physical address.
We have 3 things to track for each platform: the type of uart, the uart's phys address, and the virtual address we map it to. Obviously, we can't get rid of the first 2, but we can align the virtual address to the same 1MB section for DEBUG_LL on all platforms. Then we only have 2 differences to deal with. If we make the physical address a config value, then we could unify all the addruart implementations (except perhaps for the crazy stuff omap does). So something like this:
.macro addruart,rp,rv,tmp mov \rv, #0xfe000000 orr \rv, \rv, #0x00d00000 ldr \rp, =CONFIG_DEBUG_LL_UART_ADDR lsl \tmp, \rp, #12 lsr \tmp, \tmp, #12 orr \rv, \rv, \tmp .endm
Of course we'd have to shift around static mappings to free up whatever address we use. I don't know if 0xfed00000 would be the best choice, but that is just below were I put the PCI i/o mapping.
Rob
PATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 7 lines · Rob Herring
Quoted 3 lines · Russell King - ARM Linux
It's not only about virtual addresses, it's about physical addresses too, and we can't dictate that all hardware exposes a UART at any particular physical address.
We have 3 things to track for each platform: the type of uart, the uart's phys address, and the virtual address we map it to.
Right, thanks for explaining it more properly the second time around.
However, you actually have four things to track:
1. The physical address
2. The virtual address
3. The inter-register offset
4. The type of the UART
Tony Lindgren
maintainerPATCH 1/6 ARM: move ARCH config definitions into mach dirs
Quoted 9 lines · Russell King - ARM Linux
Quoted 7 lines · Rob Herring
Quoted 3 lines · Russell King - ARM Linux
It's not only about virtual addresses, it's about physical addresses too, and we can't dictate that all hardware exposes a UART at any particular physical address.
We have 3 things to track for each platform: the type of uart, the uart's phys address, and the virtual address we map it to.
Quoted 7 lines
Right, thanks for explaining it more properly the second time around.
However, you actually have four things to track:
1. The physical address
2. The virtual address
3. The inter-register offset
4. The type of the UART
And these can be machine specific, not platform specific. Some omaps have an external uart only where the address and register shift are different from the internal ports.
Regards,
Tony
PATCH 2/6 ARM: introduce Kconfig.mach
In reply to Rob HerringFrom: Rob Herring <[email protected]>
Move all the mach related config options into separate Kconfig.mach file.
--- arch/arm/Kconfig | 529 +------------------------------------------------ arch/arm/Kconfig.mach | 528 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 529 insertions(+), 528 deletions(-) create mode 100644 arch/arm/Kconfig.mach
arch/arm/Kconfig +1 -528
@@ -248,534 +248,7 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. -# -# The "ARM system type" choice list is ordered alphabetically by option -# text. Please add new entries in the option alphabetic order. -# -choice - prompt "ARM system type" - default ARCH_VERSATILE - -config ARCH_SOCFPGA_CHOICE - bool "Altera SOCFPGA family" - select ARCH_SOCFPGA - help - This enables support for Altera SOCFPGA Cyclone V platform - -config ARCH_INTEGRATOR_CHOICE - bool "ARM Ltd. Integrator family" - select ARCH_INTEGRATOR - help - Support for ARM's Integrator platform. - -config ARCH_REALVIEW_CHOICE - bool "ARM Ltd. RealView family" - select ARCH_REALVIEW - help - This enables support for ARM Ltd RealView boards. - -config ARCH_VERSATILE_CHOICE - bool "ARM Ltd. Versatile family" - select ARCH_VERSATILE - help - This enables support for ARM Ltd Versatile board. - -config ARCH_VEXPRESS_CHOICE - bool "ARM Ltd. Versatile Express family" - select ARCH_VEXPRESS - help - This enables support for the ARM Ltd Versatile Express boards. - -config ARCH_AT91_CHOICE - bool "Atmel AT91" - select ARCH_AT91 - help - This enables support for systems based on Atmel - AT91RM9200 and AT91SAM9* processors. - -config ARCH_BCMRING_CHOICE - bool "Broadcom BCMRING" - depends on MMU - select ARCH_BCMRING - help - Support for Broadcom's BCMRing platform. - -config ARCH_HIGHBANK_CHOICE - bool "Calxeda Highbank-based" - select ARCH_HIGHBANK - help - Support for the Calxeda Highbank SoC based boards. - -config ARCH_CLPS711X_CHOICE - bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select ARCH_CLPS711X - help - Support for Cirrus Logic 711x/721x/731x based boards. - -config ARCH_CNS3XXX_CHOICE - bool "Cavium Networks CNS3XXX family" - select ARCH_CNS3XXX - help - Support for Cavium Networks CNS3XXX platform. - -config ARCH_GEMINI_CHOICE - bool "Cortina Systems Gemini" - select ARCH_GEMINI - help - Support for the Cortina Systems Gemini family SoCs - -config ARCH_PRIMA2_CHOICE - bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - select ARCH_PRIMA2 - help - Support for CSR SiRFSoC ARM Cortex A9 Platform - -config ARCH_EBSA110_CHOICE - bool "EBSA-110" - select ARCH_EBSA110 - help - This is an evaluation board for the StrongARM processor available - from Digital. It has limited hardware on-board, including an - Ethernet interface, two PCMCIA sockets, two serial ports and a - parallel port. - -config ARCH_EP93XX_CHOICE - bool "EP93xx-based" - select ARCH_EP93XX - help - This enables support for the Cirrus EP93xx series of CPUs. - -config ARCH_FOOTBRIDGE_CHOICE - bool "FootBridge" - select ARCH_FOOTBRIDGE - help - Support for systems based on the DC21285 companion chip - ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. - -config ARCH_MXC_CHOICE - bool "Freescale MXC/iMX-based" - select ARCH_MXC - help - Support for Freescale MXC/iMX-based family of processors - -config ARCH_MXS_CHOICE - bool "Freescale MXS-based" - select ARCH_MXS - help - Support for Freescale MXS-based family of processors - -config ARCH_NETX_CHOICE - bool "Hilscher NetX based" - select ARCH_NETX - help - This enables support for systems based on the Hilscher NetX Soc - -config ARCH_H720X_CHOICE - bool "Hynix HMS720x-based" - select ARCH_H720X - help - This enables support for systems based on the Hynix HMS720x - -config ARCH_IOP13XX_CHOICE - bool "IOP13xx-based" - depends on MMU - select ARCH_IOP13XX - help - Support for Intel's IOP13XX (XScale) family of processors. - -config ARCH_IOP32X_CHOICE - bool "IOP32x-based" - depends on MMU - select ARCH_IOP32X - help - Support for Intel's 80219 and IOP32X (XScale) family of - processors. - -config ARCH_IOP33X_CHOICE - bool "IOP33x-based" - depends on MMU - select ARCH_IOP33X - help - Support for Intel's IOP33X (XScale) family of processors. - -config ARCH_IXP4XX_CHOICE - bool "IXP4xx-based" - depends on MMU - select ARCH_IXP4XX - help - Support for Intel's IXP4XX (XScale) family of processors. - -config ARCH_MVEBU_CHOICE - bool "Marvell SOCs with Device Tree support" - select ARCH_MVEBU - help - Support for the Marvell SoC Family with device tree support - -config ARCH_DOVE_CHOICE - bool "Marvell Dove" - select ARCH_DOVE - help - Support for the Marvell Dove SoC 88AP510 - -config ARCH_KIRKWOOD_CHOICE - bool "Marvell Kirkwood" - select ARCH_KIRKWOOD - help - Support for the following Marvell Kirkwood series SoCs: - 88F6180, 88F6192 and 88F6281. - -config ARCH_LPC32XX_CHOICE - bool "NXP LPC32XX" - select ARCH_LPC32XX - help - Support for the NXP LPC32XX family of processors - -config ARCH_MV78XX0_CHOICE - bool "Marvell MV78xx0" - select ARCH_MV78XX0 - help - Support for the following Marvell MV78xx0 series SoCs: - MV781x0, MV782x0. - -config ARCH_ORION5X_CHOICE - bool "Marvell Orion" - depends on MMU - select ARCH_ORION5X - help - Support for the following Marvell Orion 5x series SoCs: - Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), - Orion-2 (5281), Orion-1-90 (6183). - -config ARCH_MMP_CHOICE - bool "Marvell PXA168/910/MMP2" - depends on MMU - select ARCH_MMP - help - Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. - -config ARCH_KS8695_CHOICE - bool "Micrel/Kendin KS8695" - select ARCH_KS8695 - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - -config ARCH_W90X900_CHOICE - bool "Nuvoton W90X900 CPU" - select ARCH_W90X900 - help - Support for Nuvoton (Winbond logic dept.) ARM9 processor, - At present, the w90x900 has been renamed nuc900, regarding - the ARM series product line, you can login the following - link address to know more. - - <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ - ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> - -config ARCH_TEGRA_CHOICE - bool "NVIDIA Tegra" - select ARCH_TEGRA - help - This enables support for NVIDIA Tegra based systems (Tegra APX, - Tegra 6xx and Tegra 2 series). - -config ARCH_PICOXCELL_CHOICE - bool "Picochip picoXcell" - select ARCH_PICOXCELL - help - This enables support for systems based on the Picochip picoXcell - family of Femtocell devices. The picoxcell support requires device tree - for all boards. - -config ARCH_PNX4008_CHOICE - bool "Philips Nexperia PNX4008 Mobile" - select ARCH_PNX4008 - help - This enables support for Philips PNX4008 mobile platform. - -config ARCH_PXA_CHOICE - bool "PXA2xx/PXA3xx-based" - depends on MMU - select ARCH_PXA - help - Support for Intel/Marvell's PXA2xx/PXA3xx processor line. - -config ARCH_MSM_CHOICE - bool "Qualcomm MSM" - select ARCH_MSM - help - Support for Qualcomm MSM/QSD based systems. This runs on the - apps processor of the MSM/QSD and depends on a shared memory - interface to the modem processor which runs the baseband - stack and controls some vital subsystems - (clock and power control, etc). - -config ARCH_SHMOBILE_CHOICE - bool "Renesas SH-Mobile / R-Mobile" - select ARCH_SHMOBILE - help - Support for Renesas's SH-Mobile and R-Mobile ARM platforms. - -config ARCH_RPC_CHOICE - bool "RiscPC" - select ARCH_RPC - help - On the Acorn Risc-PC, Linux can support the internal IDE disk and - CD-ROM interface, serial and parallel port, and the floppy drive. - -config ARCH_SA1100_CHOICE - bool "SA1100-based" - select ARCH_SA1100 - help - Support for StrongARM 11x0 based boards. - -config ARCH_S3C24XX_CHOICE - bool "Samsung S3C24XX SoCs" - select ARCH_S3C24XX - help - Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 - and S3C2450 SoCs based systems, such as the Simtec Electronics BAST - (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the - Samsung SMDK2410 development board (and derivatives). - -config ARCH_S3C64XX_CHOICE - bool "Samsung S3C64XX" - select ARCH_S3C64XX - help - Samsung S3C64XX series based systems - -config ARCH_S5P64X0_CHOICE - bool "Samsung S5P6440 S5P6450" - select ARCH_S5P64X0 - help - Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, - SMDK6450. - -config ARCH_S5PC100_CHOICE - bool "Samsung S5PC100" - select ARCH_S5PC100 - help - Samsung S5PC100 series based systems - -config ARCH_S5PV210_CHOICE - bool "Samsung S5PV210/S5PC110" - select ARCH_S5PV210 - help - Samsung S5PV210/S5PC110 series based systems - -config ARCH_EXYNOS_CHOICE - bool "SAMSUNG EXYNOS" - select ARCH_EXYNOS - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - -config ARCH_SHARK_CHOICE - bool "Shark" - select ARCH_SHARK - help - Support for the StrongARM based Digital DNARD machine, also known - as "Shark" (<http://www.shark-linux.de/shark.html>). - -config ARCH_U300_CHOICE - bool "ST-Ericsson U300 Series" - depends on MMU - select ARCH_U300 - help - Support for ST-Ericsson U300 series mobile platforms. - -config ARCH_U8500_CHOICE - bool "ST-Ericsson U8500 Series" - depends on MMU - select ARCH_U8500 - help - Support for ST-Ericsson's Ux500 architecture - -config ARCH_NOMADIK_CHOICE - bool "STMicroelectronics Nomadik" - select ARCH_NOMADIK - help - Support for the Nomadik platform by ST-Ericsson - -config ARCH_DAVINCI_CHOICE - bool "TI DaVinci" - select ARCH_DAVINCI - select NEED_MACH_GPIO_H - help - Support for TI's DaVinci platform. - -config ARCH_OMAP_CHOICE - bool "TI OMAP" - depends on MMU - select ARCH_OMAP - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config PLAT_SPEAR_CHOICE - bool "ST SPEAr" - select PLAT_SPEAR - help - Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). - -config ARCH_VT8500_CHOICE - bool "VIA/WonderMedia 85xx" - select ARCH_VT8500 - help - Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. - -config ARCH_ZYNQ_CHOICE - bool "Xilinx Zynq ARM Cortex A9 Platform" - select ARCH_ZYNQ - help - Support for Xilinx Zynq ARM Cortex A9 Platform -endchoice - -# -# This is sorted alphabetically by mach-* pathname. However, plat-* -# Kconfigs may be included either alphabetically (according to the -# plat- suffix) or along side the corresponding mach-* source. -# -source "arch/arm/mach-mvebu/Kconfig" - -source "arch/arm/mach-at91/Kconfig" - -source "arch/arm/mach-bcmring/Kconfig" - -source "arch/arm/mach-clps711x/Kconfig" - -source "arch/arm/mach-cns3xxx/Kconfig" - -source "arch/arm/mach-davinci/Kconfig" - -source "arch/arm/mach-dove/Kconfig" - -source "arch/arm/mach-ebsa110/Kconfig" - -source "arch/arm/mach-ep93xx/Kconfig" - -source "arch/arm/mach-footbridge/Kconfig" - -source "arch/arm/mach-gemini/Kconfig" - -source "arch/arm/mach-h720x/Kconfig" - -source "arch/arm/mach-highbank/Kconfig" - -source "arch/arm/mach-integrator/Kconfig" - -source "arch/arm/mach-iop32x/Kconfig" - -source "arch/arm/mach-iop33x/Kconfig" - -source "arch/arm/mach-iop13xx/Kconfig" - -source "arch/arm/mach-ixp4xx/Kconfig" - -source "arch/arm/mach-kirkwood/Kconfig" - -source "arch/arm/mach-ks8695/Kconfig" - -source "arch/arm/mach-lpc32xx/Kconfig" - -source "arch/arm/mach-msm/Kconfig" - -source "arch/arm/mach-mv78xx0/Kconfig" - -source "arch/arm/plat-mxc/Kconfig" - -source "arch/arm/mach-mxs/Kconfig" - -source "arch/arm/mach-netx/Kconfig" - -source "arch/arm/mach-nomadik/Kconfig" -source "arch/arm/plat-nomadik/Kconfig" - -source "arch/arm/plat-omap/Kconfig" - -source "arch/arm/mach-omap1/Kconfig" - -source "arch/arm/mach-omap2/Kconfig" - -source "arch/arm/mach-orion5x/Kconfig" - -source "arch/arm/mach-picoxcell/Kconfig" - -source "arch/arm/mach-pnx4008/Kconfig" - -source "arch/arm/mach-pxa/Kconfig" -source "arch/arm/plat-pxa/Kconfig" - -source "arch/arm/mach-mmp/Kconfig" - -source "arch/arm/mach-realview/Kconfig" - -source "arch/arm/mach-rpc/Kconfig" - -source "arch/arm/mach-sa1100/Kconfig" - -source "arch/arm/plat-samsung/Kconfig" -source "arch/arm/plat-s3c24xx/Kconfig" - -source "arch/arm/mach-shark/Kconfig" - -source "arch/arm/mach-socfpga/Kconfig" - -source "arch/arm/plat-spear/Kconfig" - -source "arch/arm/mach-s3c24xx/Kconfig" -if ARCH_S3C24XX -source "arch/arm/mach-s3c2412/Kconfig" -source "arch/arm/mach-s3c2440/Kconfig" -endif - -source "arch/arm/mach-s3c64xx/Kconfig" - -source "arch/arm/mach-s5p64x0/Kconfig" - -source "arch/arm/mach-s5pc100/Kconfig" - -source "arch/arm/mach-s5pv210/Kconfig" - -source "arch/arm/mach-exynos/Kconfig" - -source "arch/arm/mach-shmobile/Kconfig" - -source "arch/arm/mach-tegra/Kconfig" - -source "arch/arm/mach-u300/Kconfig" - -source "arch/arm/mach-ux500/Kconfig" - -source "arch/arm/mach-versatile/Kconfig" - -source "arch/arm/mach-vexpress/Kconfig" -source "arch/arm/plat-versatile/Kconfig" - -source "arch/arm/mach-vt8500/Kconfig" - -source "arch/arm/mach-w90x900/Kconfig" - -source "arch/arm/mach-zynq/Kconfig" - -# Definitions to make life easier -config ARCH_ACORN - bool - -config PLAT_IOP - bool - select GENERIC_CLOCKEVENTS - -config PLAT_ORION - bool - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - select COMMON_CLK - -config PLAT_PXA - bool - -config PLAT_VERSATILE - bool +source "arch/arm/Kconfig.mach" config ARM_TIMER_SP804 bool
arch/arm/Kconfig.mach new file +528 -0
528 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH 2/6 ARM: introduce Kconfig.mach
Quoted 9 lines · Rob Herring
Move all the mach related config options into separate
Kconfig.machfile.Signed-off-by Rob Herring <[email protected]>--- arch/arm/Kconfig | 529 +------------------------------------------------ arch/arm/Kconfig.mach | 528 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 529 insertions(+), 528 deletions(-) create mode 100644 arch/arm/Kconfig.mach
FWIW as far as ep93xx goes..
Thanks
PATCH 3/6 ARM: picoxcell: header fixes for multi-platform
In reply to Rob HerringFrom: Rob Herring <[email protected]>
--- arch/arm/mach-picoxcell/common.c | 6 ++--- arch/arm/mach-picoxcell/include/mach/map.h | 25 -------------------- .../mach-picoxcell/include/mach/picoxcell_soc.h | 25 -------------------- arch/arm/mach-picoxcell/picoxcell_soc.h | 25 ++++++++++++++++++++ 4 files changed, 28 insertions(+), 53 deletions(-) delete mode 100644 arch/arm/mach-picoxcell/include/mach/map.h delete mode 100644 arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h create mode 100644 arch/arm/mach-picoxcell/picoxcell_soc.h
arch/arm/mach-picoxcell/common.c +3 -3
@@ -20,11 +20,11 @@#include <asm/hardware/vic.h> #include <asm/mach/map.h> -#include <mach/map.h> -#include <mach/picoxcell_soc.h> - +#include "picoxcell_soc.h" #include "common.h" +#define PHYS_TO_IO (x) (((x) & 0x00ffffff) | 0xfe000000) +#define WDT_CTRL_REG_EN_MASK (1 << 0)#define WDT_CTRL_REG_OFFS (0x00)#define WDT_TIMEOUT_REG_OFFS (0x04)
arch/arm/mach-picoxcell/include/mach/map.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* Copyright (c) 2011 Picochip Ltd., Jamie Iles -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -*/ -#ifndef __PICOXCELL_MAP_H__ -#define __PICOXCELL_MAP_H__ - -#define PHYS_TO_IO (x) (((x) & 0x00ffffff) | 0xfe000000) - -#ifdef __ASSEMBLY__ -#define IO_ADDRESS (x) PHYS_TO_IO((x)) -#else -#define IO_ADDRESS (x) (void __iomem __force *)(PHYS_TO_IO((x))) -#endif - -#endif /* __PICOXCELL_MAP_H__ */
arch/arm/mach-picoxcell/include/mach/picoxcell_soc.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* Copyright (c) 2011 Picochip Ltd., Jamie Iles -* -* This file contains the hardware definitions of the picoXcell SoC devices. -* -* This program is free software; you can redistribute it and/or modify -* it under the terms of the GNU General Public License as published by -* the Free Software Foundation; either version 2 of the License, or -* (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -*/ -#ifndef __PICOXCELL_SOC_H__ -#define __PICOXCELL_SOC_H__ - -#define PICOXCELL_UART1_BASE 0x80230000 -#define PICOXCELL_PERIPH_BASE 0x80000000 -#define PICOXCELL_PERIPH_LENGTH SZ_4M -#define PICOXCELL_VIC0_BASE 0x80060000 -#define PICOXCELL_VIC1_BASE 0x80064000 - -#endif /* __PICOXCELL_SOC_H__ */
arch/arm/mach-picoxcell/picoxcell_soc.h new file +25 -0
@@ -0,0 +1,25 @@ +/* +* Copyright (c) 2011 Picochip Ltd., Jamie Iles +* +* This file contains the hardware definitions of the picoXcell SoC devices. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ +#ifndef __PICOXCELL_SOC_H__ +#define __PICOXCELL_SOC_H__ + +#define PICOXCELL_UART1_BASE 0x80230000 +#define PICOXCELL_PERIPH_BASE 0x80000000 +#define PICOXCELL_PERIPH_LENGTH SZ_4M +#define PICOXCELL_VIC0_BASE 0x80060000 +#define PICOXCELL_VIC1_BASE 0x80064000 + +#endif /* __PICOXCELL_SOC_H__ */
Signature · 1 line
1.7.9.5
PATCH 4/6 ARM: vexpress: remove dependency on mach/* headers
In reply to Rob HerringFrom: Arnd Bergmann <[email protected]>
--- arch/arm/mach-vexpress/ct-ca9x4.c | 1 + arch/arm/mach-vexpress/include/mach/irqs.h | 2 ++ 2 files changed, 3 insertions(+)
arch/arm/mach-vexpress/ct-ca9x4.c +1 -0
@@ -27,6 +27,7 @@#include "core.h" #include <mach/motherboard.h> +#include <mach/irqs.h> #include <plat/clcd.h>
arch/arm/mach-vexpress/include/mach/irqs.h +2 -0
@@ -1,4 +1,6 @@#define IRQ_LOCALTIMER 29#define IRQ_LOCALWDOG 30 +#ifndef CONFIG_SPARSE_IRQ #define NR_IRQS 256 +#endif
Signature · 1 line
1.7.9.5
PATCH 5/6 ARM: initial multiplatform support
In reply to Rob HerringFrom: Rob Herring <[email protected]>
This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now:
* SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled
* We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on.
* A common clock framework is in place since v3.4 but not yet being used. Work on this is on its way.
* DEBUG_LL for early debugging is currently disabled.
* THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big
[Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, socfpga, and vexpress are converted.
--- arch/arm/Kconfig.mach | 57 ++++++++++++++ arch/arm/Makefile | 155 ++++++++++++++++++++------------------ arch/arm/boot/compressed/misc.c | 6 ++ arch/arm/include/asm/timex.h | 4 + arch/arm/mach-highbank/Kconfig | 2 +- arch/arm/mach-mvebu/Kconfig | 2 +- arch/arm/mach-mvebu/Makefile | 2 + arch/arm/mach-picoxcell/Kconfig | 2 +- arch/arm/mach-socfpga/Kconfig | 2 +- arch/arm/mach-vexpress/Kconfig | 2 +- arch/arm/mach-vexpress/Makefile | 2 + arch/arm/plat-versatile/Makefile | 2 + 12 files changed, 158 insertions(+), 80 deletions(-)
arch/arm/Kconfig.mach +57 -0
@@ -4,6 +4,7 @@ # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILE config ARCH_SOCFPGA_CHOICE
@@ -378,6 +379,62 @@ config ARCH_ZYNQ_CHOICE Support for Xilinx Zynq ARM Cortex A9 Platform endchoice +menuconfig ARCH_MULTIPLATFORM + bool "Multiple platform selection" + select USE_OF + select COMMON_CLK + select SPARSE_IRQ + select MULTI_IRQ_HANDLER + select AUTO_ZRELADDR + depends on MMU + +if ARCH_MULTIPLATFORM + +comment "CPU Core family selection" + +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526, StrongARM)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4T + bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V5 + bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4_V5 + bool + +config ARCH_MULTI_V6 + bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + select CPU_V6 + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V7 + bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + select CPU_V7 + select ARCH_VEXPRESS + default y + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V6_V7 + bool + +config ARCH_MULTI_CPU_AUTO + def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) + select ARCH_MULTI_V5 + +endif + +if ARCH_MULTIPLATFORM +comment "SoC family selection" +endif + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the
arch/arm/Makefile +80 -75
179 lines not on this page · raw message
arch/arm/boot/compressed/misc.c +6 -0
@@ -25,7 +25,13 @@ unsigned int __machine_arch_type;static void putstr (const char *ptr);extern void error (char *x); +#ifdef CONFIG_ARCH_MULTIPLATFORM +static inline void putc (int c) {} +static inline void flush (void ) {} +static inline void arch_decomp_setup (void ) {} +#else #include <mach/uncompress.h> +#endif #ifdef CONFIG_DEBUG_ICEDCC
arch/arm/include/asm/timex.h +4 -0
@@ -13,7 +13,11 @@#define _ASMARM_TIMEX_H#include <asm/arch_timer.h> +#ifdef CONFIG_ARCH_MULTIPLATFORM +#define CLOCK_TICK_RATE 1000000 +#else #include <mach/timex.h> +#endif typedef unsigned long cycles_t ;
arch/arm/mach-highbank/Kconfig +1 -1
@@ -1,5 +1,5 @@ config ARCH_HIGHBANK - bool + bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC
arch/arm/mach-mvebu/Kconfig +1 -1
@@ -1,5 +1,5 @@ config ARCH_MVEBU - bool + bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 select CLKSRC_MMIO select COMMON_CLK select GENERIC_CLOCKEVENTS
arch/arm/mach-mvebu/Makefile +2 -0
@@ -1,2 +1,4 @@ +ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
arch/arm/mach-picoxcell/Kconfig +1 -1
@@ -1,5 +1,5 @@ config ARCH_PICOXCELL - bool + bool "Picochip PicoXcell" if ARCH_MULTI_V6 select ARCH_REQUIRE_GPIOLIB select ARM_PATCH_PHYS_VIRT select ARM_VIC
arch/arm/mach-socfpga/Kconfig +1 -1
@@ -1,5 +1,5 @@ config ARCH_SOCFPGA - bool + bool "Altera SOCFPGA family" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_GIC
arch/arm/mach-vexpress/Kconfig +1 -1
@@ -1,5 +1,5 @@ config ARCH_VEXPRESS - bool + bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA select ARM_TIMER_SP804
arch/arm/mach-vexpress/Makefile +2 -0
@@ -1,6 +1,8 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-versatile/include obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
arch/arm/plat-versatile/Makefile +2 -0
@@ -1,3 +1,5 @@ +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
Signature · 1 line
1.7.9.5
PATCH 6/6 ARM: update defconfigs
In reply to Rob HerringFrom: Rob Herring <[email protected]>
Converted with this script:
sed -i -e 's/\(CONFIG_ARCH_.*\)=/\1_CHOICE=/' -- arch/arm/configs/*
and then fixup all the duplicates.
--- arch/arm/configs/acs5k_defconfig | 2 +- arch/arm/configs/acs5k_tiny_defconfig | 2 +- arch/arm/configs/afeb9260_defconfig | 2 +- arch/arm/configs/ag5evm_defconfig | 2 +- arch/arm/configs/am200epdkit_defconfig | 2 +- arch/arm/configs/ap4evb_defconfig | 2 +- arch/arm/configs/armadillo800eva_defconfig | 2 +- arch/arm/configs/assabet_defconfig | 2 +- arch/arm/configs/at91_dt_defconfig | 2 +- arch/arm/configs/at91rm9200_defconfig | 2 +- arch/arm/configs/at91sam9260_defconfig | 2 +- arch/arm/configs/at91sam9261_defconfig | 2 +- arch/arm/configs/at91sam9263_defconfig | 2 +- arch/arm/configs/at91sam9g20_defconfig | 2 +- arch/arm/configs/at91sam9g45_defconfig | 2 +- arch/arm/configs/at91sam9rl_defconfig | 2 +- arch/arm/configs/at91x40_defconfig | 2 +- arch/arm/configs/badge4_defconfig | 2 +- arch/arm/configs/bcmring_defconfig | 2 +- arch/arm/configs/bonito_defconfig | 2 +- arch/arm/configs/cam60_defconfig | 2 +- arch/arm/configs/cerfcube_defconfig | 2 +- arch/arm/configs/cm_x2xx_defconfig | 2 +- arch/arm/configs/cm_x300_defconfig | 2 +- arch/arm/configs/cns3420vb_defconfig | 2 +- arch/arm/configs/colibri_pxa270_defconfig | 2 +- arch/arm/configs/colibri_pxa300_defconfig | 2 +- arch/arm/configs/collie_defconfig | 2 +- arch/arm/configs/corgi_defconfig | 2 +- arch/arm/configs/cpu9260_defconfig | 2 +- arch/arm/configs/cpu9g20_defconfig | 2 +- arch/arm/configs/da8xx_omapl_defconfig | 2 +- arch/arm/configs/davinci_all_defconfig | 2 +- arch/arm/configs/dove_defconfig | 2 +- arch/arm/configs/ebsa110_defconfig | 2 +- arch/arm/configs/edb7211_defconfig | 2 +- arch/arm/configs/em_x270_defconfig | 2 +- arch/arm/configs/ep93xx_defconfig | 2 +- arch/arm/configs/eseries_pxa_defconfig | 2 +- arch/arm/configs/exynos4_defconfig | 2 +- arch/arm/configs/exynos_defconfig | 4 ++-- arch/arm/configs/ezx_defconfig | 2 +- arch/arm/configs/footbridge_defconfig | 2 +- arch/arm/configs/fortunet_defconfig | 2 +- arch/arm/configs/g3evm_defconfig | 2 +- arch/arm/configs/g4evm_defconfig | 2 +- arch/arm/configs/h3600_defconfig | 2 +- arch/arm/configs/h5000_defconfig | 2 +- arch/arm/configs/h7201_defconfig | 2 +- arch/arm/configs/h7202_defconfig | 2 +- arch/arm/configs/hackkit_defconfig | 2 +- arch/arm/configs/imote2_defconfig | 2 +- arch/arm/configs/imx_v4_v5_defconfig | 2 +- arch/arm/configs/imx_v6_v7_defconfig | 2 +- arch/arm/configs/integrator_defconfig | 2 +- arch/arm/configs/iop13xx_defconfig | 2 +- arch/arm/configs/iop32x_defconfig | 2 +- arch/arm/configs/iop33x_defconfig | 2 +- arch/arm/configs/ixp4xx_defconfig | 2 +- arch/arm/configs/jornada720_defconfig | 2 +- arch/arm/configs/kirkwood_defconfig | 2 +- arch/arm/configs/kota2_defconfig | 2 +- arch/arm/configs/ks8695_defconfig | 2 +- arch/arm/configs/kzm9d_defconfig | 2 +- arch/arm/configs/kzm9g_defconfig | 2 +- arch/arm/configs/lart_defconfig | 2 +- arch/arm/configs/lpc32xx_defconfig | 2 +- arch/arm/configs/lpd270_defconfig | 2 +- arch/arm/configs/lubbock_defconfig | 2 +- arch/arm/configs/mackerel_defconfig | 2 +- arch/arm/configs/magician_defconfig | 2 +- arch/arm/configs/mainstone_defconfig | 2 +- arch/arm/configs/marzen_defconfig | 2 +- arch/arm/configs/mini2440_defconfig | 2 +- arch/arm/configs/mmp2_defconfig | 2 +- arch/arm/configs/msm_defconfig | 2 +- arch/arm/configs/mv78xx0_defconfig | 2 +- arch/arm/configs/mvebu_defconfig | 2 +- arch/arm/configs/mxs_defconfig | 2 +- arch/arm/configs/neponset_defconfig | 2 +- arch/arm/configs/netwinder_defconfig | 2 +- arch/arm/configs/netx_defconfig | 2 +- arch/arm/configs/nhk8815_defconfig | 2 +- arch/arm/configs/nuc910_defconfig | 2 +- arch/arm/configs/nuc950_defconfig | 2 +- arch/arm/configs/nuc960_defconfig | 2 +- arch/arm/configs/omap1_defconfig | 2 +- arch/arm/configs/omap2plus_defconfig | 2 +- arch/arm/configs/orion5x_defconfig | 2 +- arch/arm/configs/palmz72_defconfig | 2 +- arch/arm/configs/pcm027_defconfig | 2 +- arch/arm/configs/pleb_defconfig | 2 +- arch/arm/configs/pnx4008_defconfig | 2 +- arch/arm/configs/prima2_defconfig | 2 +- arch/arm/configs/pxa168_defconfig | 2 +- arch/arm/configs/pxa255-idp_defconfig | 2 +- arch/arm/configs/pxa3xx_defconfig | 2 +- arch/arm/configs/pxa910_defconfig | 2 +- arch/arm/configs/qil-a9260_defconfig | 2 +- arch/arm/configs/raumfeld_defconfig | 2 +- arch/arm/configs/realview-smp_defconfig | 2 +- arch/arm/configs/realview_defconfig | 2 +- arch/arm/configs/rpc_defconfig | 2 +- arch/arm/configs/s3c2410_defconfig | 2 +- arch/arm/configs/s3c6400_defconfig | 2 +- arch/arm/configs/s5p64x0_defconfig | 2 +- arch/arm/configs/s5pc100_defconfig | 2 +- arch/arm/configs/s5pv210_defconfig | 2 +- arch/arm/configs/sam9_l9260_defconfig | 2 +- arch/arm/configs/shannon_defconfig | 2 +- arch/arm/configs/shark_defconfig | 2 +- arch/arm/configs/simpad_defconfig | 2 +- arch/arm/configs/socfpga_defconfig | 2 +- arch/arm/configs/spear13xx_defconfig | 2 +- arch/arm/configs/spear6xx_defconfig | 2 +- arch/arm/configs/spitz_defconfig | 2 +- arch/arm/configs/stamp9g20_defconfig | 2 +- arch/arm/configs/tct_hammer_defconfig | 2 +- arch/arm/configs/tegra_defconfig | 2 +- arch/arm/configs/trizeps4_defconfig | 2 +- arch/arm/configs/u300_defconfig | 2 +- arch/arm/configs/u8500_defconfig | 2 +- arch/arm/configs/usb-a9260_defconfig | 2 +- arch/arm/configs/vexpress_defconfig | 2 +- arch/arm/configs/viper_defconfig | 2 +- arch/arm/configs/xcep_defconfig | 2 +- arch/arm/configs/zeus_defconfig | 2 +- 127 files changed, 128 insertions(+), 128 deletions(-)
arch/arm/configs/acs5k_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y +CONFIG_ARCH_KS8695_CHOICE=y CONFIG_MACH_KS8695=y CONFIG_MACH_DSM320=y CONFIG_MACH_ACS5K=y
arch/arm/configs/acs5k_tiny_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y +CONFIG_ARCH_KS8695_CHOICE=y CONFIG_MACH_ACS5K=y # CONFIG_ARM_THUMB is not set CONFIG_AEABI=y
arch/arm/configs/afeb9260_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_AFEB9260=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
arch/arm/configs/ag5evm_defconfig +1 -1
@@ -15,7 +15,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_AG5EVM=y CONFIG_MEMORY_SIZE=0x10000000
arch/arm/configs/am200epdkit_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_GUMSTIX=y CONFIG_PCCARD=y CONFIG_PREEMPT=y
arch/arm/configs/ap4evb_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_SH7372=y CONFIG_MACH_AP4EVB=y CONFIG_AEABI=y
arch/arm/configs/armadillo800eva_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_R8A7740=y CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set
arch/arm/configs/assabet_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_ASSABET=y CONFIG_PCCARD=y CONFIG_PCMCIA_SA1100=y
arch/arm/configs/at91_dt_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_SOC_AT91SAM9260=y CONFIG_SOC_AT91SAM9263=y CONFIG_SOC_AT91SAM9G45=y
arch/arm/configs/at91rm9200_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91RM9200=y CONFIG_MACH_ONEARM=y CONFIG_ARCH_AT91RM9200DK=y
arch/arm/configs/at91sam9260_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_ARCH_AT91SAM9260_SAM9XE=y CONFIG_MACH_AT91SAM9260EK=y
arch/arm/configs/at91sam9261_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
arch/arm/configs/at91sam9263_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y CONFIG_MACH_USB_A9263=y
arch/arm/configs/at91sam9g20_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_AT91SAM9G20EK=y CONFIG_MACH_AT91SAM9G20EK_2MMC=y
arch/arm/configs/at91sam9g45_defconfig +1 -1
@@ -15,7 +15,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9G45=y CONFIG_MACH_AT91SAM9M10G45EK=y CONFIG_MACH_AT91SAM_DT=y
arch/arm/configs/at91sam9rl_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9RL=y CONFIG_MACH_AT91SAM9RLEK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
arch/arm/configs/at91x40_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_SLAB=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91X40=y CONFIG_MACH_AT91EB01=y CONFIG_AT91_EARLY_USART0=y
arch/arm/configs/badge4_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_MODVERSIONS=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_BADGE4=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/bcmring_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_BCMRING=y +CONFIG_ARCH_BCMRING_CHOICE=y CONFIG_BCM_ZRELADDR=0x8000 CONFIG_CPU_32v6K=y CONFIG_NO_HZ=y
arch/arm/configs/bonito_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_R8A7740=y CONFIG_MACH_BONITO=y # CONFIG_SH_TIMER_TMU is not set
arch/arm/configs/cam60_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_CAM60=y CONFIG_ZBOOT_ROM_BSS=0x20004000
arch/arm/configs/cerfcube_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_CERF=y CONFIG_SA1100_CERF_FLASH_16MB=y CONFIG_PCCARD=m
arch/arm/configs/cm_x2xx_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_ARMCORE=y CONFIG_PCI=y CONFIG_PCCARD=m
arch/arm/configs/cm_x300_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_GPIO_PCA953X=y CONFIG_MACH_CM_X300=y CONFIG_NO_HZ=y
arch/arm/configs/cns3420vb_defconfig +1 -1
@@ -19,7 +19,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_IOSCHED_CFQ=m -CONFIG_ARCH_CNS3XXX=y +CONFIG_ARCH_CNS3XXX_CHOICE=y CONFIG_MACH_CNS3420VB=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/colibri_pxa270_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_COLIBRI=y CONFIG_PREEMPT=y CONFIG_AEABI=y
arch/arm/configs/colibri_pxa300_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_COLIBRI300=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttyS0,115200 rw"
arch/arm/configs/collie_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_EXPERT=y CONFIG_SLOB=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_COLLIE=y CONFIG_PCCARD=y CONFIG_PCMCIA_SA1100=y
arch/arm/configs/corgi_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y
arch/arm/configs/cpu9260_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_CPU9260=y # CONFIG_ARM_THUMB is not set
arch/arm/configs/cpu9g20_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_CPU9G20=y # CONFIG_ARM_THUMB is not set
arch/arm/configs/da8xx_omapl_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_DAVINCI=y +CONFIG_ARCH_DAVINCI_CHOICE=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y CONFIG_MACH_MITYOMAPL138=y
arch/arm/configs/davinci_all_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_DAVINCI=y +CONFIG_ARCH_DAVINCI_CHOICE=y CONFIG_ARCH_DAVINCI_DM644x=y CONFIG_ARCH_DAVINCI_DM355=y CONFIG_ARCH_DAVINCI_DM646x=y
arch/arm/configs/dove_defconfig +1 -1
@@ -6,7 +6,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_DOVE=y +CONFIG_ARCH_DOVE_CHOICE=y CONFIG_MACH_DOVE_DB=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y
arch/arm/configs/ebsa110_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_MODULES=y -CONFIG_ARCH_EBSA110=y +CONFIG_ARCH_EBSA110_CHOICE=y CONFIG_PCCARD=m CONFIG_I82365=m CONFIG_LEDS=y
arch/arm/configs/edb7211_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_CLPS711X_CHOICE=y CONFIG_ARCH_EDB7211=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/em_x270_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_EM_X270=y CONFIG_MACH_EXEDA=y CONFIG_NO_HZ=y
arch/arm/configs/ep93xx_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_EP93XX=y +CONFIG_ARCH_EP93XX_CHOICE=y CONFIG_CRUNCH=y CONFIG_MACH_ADSSPHERE=y CONFIG_MACH_EDB9301=y
arch/arm/configs/eseries_pxa_defconfig +1 -1
@@ -12,7 +12,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_PXA_ESERIES=y # CONFIG_ARM_THUMB is not set CONFIG_IWMMXT=y
arch/arm/configs/exynos4_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_EXYNOS_CHOICE=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_ARMLEX4210=y
arch/arm/configs/exynos_defconfig +2 -2
@@ -8,10 +8,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_EFI_PARTITION=y -CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_EXYNOS_CHOICE=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_S3C24XX_PWM=y -CONFIG_ARCH_EXYNOS5=y +CONFIG_ARCH_EXYNOS5_CHOICE=y CONFIG_MACH_EXYNOS4_DT=y CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y
arch/arm/configs/ezx_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_MODVERSIONS=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_PXA_EZX=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y
arch/arm/configs/footbridge_defconfig +1 -1
@@ -6,7 +6,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set CONFIG_MODULES=y -CONFIG_ARCH_FOOTBRIDGE=y +CONFIG_ARCH_FOOTBRIDGE_CHOICE=y CONFIG_ARCH_CATS=y CONFIG_ARCH_PERSONAL_SERVER=y CONFIG_ARCH_EBSA285_HOST=y
arch/arm/configs/fortunet_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_HOTPLUG is not set -CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_CLPS711X_CHOICE=y CONFIG_ARCH_FORTUNET=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/g3evm_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_SH7367=y CONFIG_MACH_G3EVM=y CONFIG_AEABI=y
arch/arm/configs/g4evm_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_SH7377=y CONFIG_MACH_G4EVM=y CONFIG_AEABI=y
arch/arm/configs/h3600_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_H3600=y CONFIG_PCCARD=y CONFIG_PCMCIA_SA1100=y
arch/arm/configs/h5000_defconfig +1 -1
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_H5000=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/h7201_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -CONFIG_ARCH_H720X=y +CONFIG_ARCH_H720X_CHOICE=y CONFIG_ARCH_H7201=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/h7202_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y -CONFIG_ARCH_H720X=y +CONFIG_ARCH_H720X_CHOICE=y CONFIG_ARCH_H7202=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/hackkit_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_HACKKIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y
arch/arm/configs/imote2_defconfig +1 -1
@@ -16,7 +16,7 @@ CONFIG_MODVERSIONS=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_INTELMOTE2=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y
arch/arm/configs/imx_v4_v5_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y +CONFIG_ARCH_MXC_CHOICE=y CONFIG_ARCH_IMX_V4_V5=y CONFIG_ARCH_MX1ADS=y CONFIG_MACH_SCB9328=y
arch/arm/configs/imx_v6_v7_defconfig +1 -1
@@ -16,7 +16,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y +CONFIG_ARCH_MXC_CHOICE=y CONFIG_MACH_MX31LILLY=y CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y
arch/arm/configs/integrator_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_INTEGRATOR=y +CONFIG_ARCH_INTEGRATOR_CHOICE=y CONFIG_ARCH_INTEGRATOR_AP=y CONFIG_ARCH_INTEGRATOR_CP=y CONFIG_CPU_ARM720T=y
arch/arm/configs/iop13xx_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_IOP13XX=y +CONFIG_ARCH_IOP13XX_CHOICE=y CONFIG_MACH_IQ81340SC=y CONFIG_MACH_IQ81340MC=y CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/iop32x_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_IOP32X=y +CONFIG_ARCH_IOP32X_CHOICE=y CONFIG_MACH_GLANTANK=y CONFIG_ARCH_IQ80321=y CONFIG_ARCH_IQ31244=y
arch/arm/configs/iop33x_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_IOP33X=y +CONFIG_ARCH_IOP33X_CHOICE=y CONFIG_ARCH_IQ80331=y CONFIG_MACH_IQ80332=y # CONFIG_ARM_THUMB is not set
arch/arm/configs/ixp4xx_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_IXP4XX=y +CONFIG_ARCH_IXP4XX_CHOICE=y CONFIG_MACH_NSLU2=y CONFIG_MACH_AVILA=y CONFIG_MACH_LOFT=y
arch/arm/configs/jornada720_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_JORNADA720=y CONFIG_SA1100_JORNADA720_SSP=y CONFIG_PCCARD=y
arch/arm/configs/kirkwood_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_KIRKWOOD=y +CONFIG_ARCH_KIRKWOOD_CHOICE=y CONFIG_MACH_DB88F6281_BP=y CONFIG_MACH_RD88F6192_NAS=y CONFIG_MACH_RD88F6281=y
arch/arm/configs/kota2_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_KOTA2=y
arch/arm/configs/ks8695_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y +CONFIG_ARCH_KS8695_CHOICE=y CONFIG_MACH_KS8695=y CONFIG_MACH_DSM320=y # CONFIG_ARM_THUMB is not set
arch/arm/configs/kzm9d_defconfig +1 -1
@@ -12,7 +12,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_EMEV2=y CONFIG_MACH_KZM9D=y CONFIG_MEMORY_START=0x40000000
arch/arm/configs/kzm9g_defconfig +1 -1
@@ -21,7 +21,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_KZM9G=y
arch/arm/configs/lart_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_LART=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y
arch/arm/configs/lpc32xx_defconfig +1 -1
@@ -17,7 +17,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_LPC32XX=y +CONFIG_ARCH_LPC32XX_CHOICE=y CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_PREEMPT=y CONFIG_AEABI=y
arch/arm/configs/lpd270_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SLAB=y CONFIG_MODULES=y -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_LOGICPD_PXA270=y # CONFIG_ARM_THUMB is not set CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/lubbock_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_LUBBOCK=y # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y
arch/arm/configs/mackerel_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_SH7372=y CONFIG_MACH_MACKEREL=y CONFIG_MEMORY_SIZE=0x10000000
arch/arm/configs/magician_defconfig +1 -1
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_H4700=y CONFIG_MACH_MAGICIAN=y CONFIG_NO_HZ=y
arch/arm/configs/mainstone_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_MAINSTONE=y # CONFIG_ARM_THUMB is not set CONFIG_LEDS=y
arch/arm/configs/marzen_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y # CONFIG_BLOCK is not set -CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_SHMOBILE_CHOICE=y CONFIG_ARCH_R8A7779=y CONFIG_MACH_MARZEN=y CONFIG_MEMORY_START=0x60000000
arch/arm/configs/mini2440_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_ARCH_S3C24XX=y +CONFIG_ARCH_S3C24XX_CHOICE=y # CONFIG_CPU_S3C2410 is not set CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y
arch/arm/configs/mmp2_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MMP=y +CONFIG_ARCH_MMP_CHOICE=y CONFIG_MACH_BROWNSTONE=y CONFIG_MACH_FLINT=y CONFIG_MACH_MARVELL_JASPER=y
arch/arm/configs/msm_defconfig +1 -1
@@ -6,7 +6,7 @@ CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MSM=y +CONFIG_ARCH_MSM_CHOICE=y CONFIG_MACH_HALIBUT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y
arch/arm/configs/mv78xx0_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MV78XX0=y +CONFIG_ARCH_MV78XX0_CHOICE=y CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y CONFIG_MACH_TERASTATION_WXL=y
arch/arm/configs/mvebu_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_MVEBU_CHOICE=y CONFIG_MACH_ARMADA_370_XP=y CONFIG_AEABI=y CONFIG_HIGHMEM=y
arch/arm/configs/mxs_defconfig +1 -1
@@ -21,7 +21,7 @@ CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXS=y +CONFIG_ARCH_MXS_CHOICE=y CONFIG_MACH_MXS_DT=y CONFIG_MACH_MX23EVK=y CONFIG_MACH_MX28EVK=y
arch/arm/configs/neponset_defconfig +1 -1
@@ -4,7 +4,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_ASSABET=y CONFIG_ASSABET_NEPONSET=y CONFIG_PCCARD=y
arch/arm/configs/netwinder_defconfig +1 -1
@@ -1,7 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_ARCH_FOOTBRIDGE=y +CONFIG_ARCH_FOOTBRIDGE_CHOICE=y CONFIG_ARCH_NETWINDER=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y
arch/arm/configs/netx_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_NETX=y +CONFIG_ARCH_NETX_CHOICE=y CONFIG_MACH_NXDKN=y CONFIG_MACH_NXDB500=y CONFIG_MACH_NXEB500HMI=y
arch/arm/configs/nhk8815_defconfig +1 -1
@@ -13,7 +13,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_NOMADIK=y +CONFIG_ARCH_NOMADIK_CHOICE=y CONFIG_MACH_NOMADIK_8815NHK=y CONFIG_PREEMPT=y CONFIG_AEABI=y
arch/arm/configs/nuc910_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_SLAB=y -CONFIG_ARCH_W90X900=y +CONFIG_ARCH_W90X900_CHOICE=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
arch/arm/configs/nuc950_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_SLAB=y -CONFIG_ARCH_W90X900=y +CONFIG_ARCH_W90X900_CHOICE=y # CONFIG_MACH_W90P910EVB is not set CONFIG_MACH_W90P950EVB=y CONFIG_NO_HZ=y
arch/arm/configs/nuc960_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_SLAB=y -CONFIG_ARCH_W90X900=y +CONFIG_ARCH_W90X900_CHOICE=y # CONFIG_MACH_W90P910EVB is not set CONFIG_MACH_W90N960EVB=y CONFIG_NO_HZ=y
arch/arm/configs/omap1_defconfig +1 -1
@@ -22,7 +22,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP_CHOICE=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set
arch/arm/configs/omap2plus_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_OMAP=y +CONFIG_ARCH_OMAP_CHOICE=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARM_THUMBEE=y
arch/arm/configs/orion5x_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_ORION5X=y +CONFIG_ARCH_ORION5X_CHOICE=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y
arch/arm/configs/palmz72_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_PXA_PALM=y # CONFIG_MACH_PALMTX is not set CONFIG_PREEMPT=y
arch/arm/configs/pcm027_defconfig +1 -1
@@ -16,7 +16,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_PCM027=y CONFIG_MACH_PCM990_BASEBOARD=y CONFIG_NO_HZ=y
arch/arm/configs/pleb_defconfig +1 -1
@@ -9,7 +9,7 @@ CONFIG_EXPERT=y CONFIG_MODULES=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_PLEB=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/pnx4008_defconfig +1 -1
@@ -12,7 +12,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_ARCH_PNX4008=y +CONFIG_ARCH_PNX4008_CHOICE=y CONFIG_PREEMPT=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/prima2_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_PRIMA2=y +CONFIG_ARCH_PRIMA2_CHOICE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y
arch/arm/configs/pxa168_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MMP=y +CONFIG_ARCH_MMP_CHOICE=y CONFIG_MACH_ASPENITE=y CONFIG_MACH_ZYLONITE2=y CONFIG_MACH_AVENGERS_LITE=y
arch/arm/configs/pxa255-idp_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_MODULES=y -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_PXA_IDP=y # CONFIG_ARM_THUMB is not set CONFIG_LEDS=y
arch/arm/configs/pxa3xx_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y CONFIG_MODULES=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_LITTLETON=y CONFIG_MACH_TAVOREVB=y CONFIG_MACH_SAAR=y
arch/arm/configs/pxa910_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MMP=y +CONFIG_ARCH_MMP_CHOICE=y CONFIG_MACH_TAVOREVB=y CONFIG_MACH_TTC_DKB=y CONFIG_NO_HZ=y
arch/arm/configs/qil-a9260_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_QIL_A9260=y CONFIG_AT91_SLOW_CLOCK=y
arch/arm/configs/raumfeld_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_RAUMFELD_RC=y CONFIG_MACH_RAUMFELD_CONNECTOR=y CONFIG_MACH_RAUMFELD_SPEAKER=y
arch/arm/configs/realview-smp_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_REALVIEW=y +CONFIG_ARCH_REALVIEW_CHOICE=y CONFIG_MACH_REALVIEW_EB=y CONFIG_REALVIEW_EB_ARM11MP=y CONFIG_MACH_REALVIEW_PB11MP=y
arch/arm/configs/realview_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_REALVIEW=y +CONFIG_ARCH_REALVIEW_CHOICE=y CONFIG_MACH_REALVIEW_EB=y CONFIG_REALVIEW_EB_ARM11MP=y CONFIG_MACH_REALVIEW_PB11MP=y
arch/arm/configs/rpc_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_RPC=y +CONFIG_ARCH_RPC_CHOICE=y CONFIG_CPU_SA110=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/s3c2410_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_S3C24XX=y +CONFIG_ARCH_S3C24XX_CHOICE=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y
arch/arm/configs/s3c6400_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C64XX=y +CONFIG_ARCH_S3C64XX_CHOICE=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_MACH_SMDK6400=y CONFIG_MACH_ANW6410=y
arch/arm/configs/s5p64x0_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P64X0=y +CONFIG_ARCH_S5P64X0_CHOICE=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y
arch/arm/configs/s5pc100_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PC100=y +CONFIG_ARCH_S5PC100_CHOICE=y CONFIG_MACH_SMDKC100=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
arch/arm/configs/s5pv210_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_KALLSYMS_ALL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PV210=y +CONFIG_ARCH_S5PV210_CHOICE=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_S3C_DEV_FB=y CONFIG_S5PV210_SETUP_FB_24BPP=y
arch/arm/configs/sam9_l9260_defconfig +1 -1
@@ -9,7 +9,7 @@ CONFIG_LOG_BUF_SHIFT=15 CONFIG_BLK_DEV_INITRD=y CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_SAM9_L9260=y CONFIG_MTD_AT91_DATAFLASH_CARD=y
arch/arm/configs/shannon_defconfig +1 -1
@@ -3,7 +3,7 @@ CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y CONFIG_MODULES=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_SHANNON=y CONFIG_PCCARD=y CONFIG_PCMCIA_SA1100=y
arch/arm/configs/shark_defconfig +1 -1
@@ -8,7 +8,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_SHARK=y +CONFIG_ARCH_SHARK_CHOICE=y CONFIG_LEDS=y CONFIG_LEDS_TIMER=y CONFIG_ZBOOT_ROM_TEXT=0x0
arch/arm/configs/simpad_defconfig +1 -1
@@ -6,7 +6,7 @@ CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y -CONFIG_ARCH_SA1100=y +CONFIG_ARCH_SA1100_CHOICE=y CONFIG_SA1100_SIMPAD=y CONFIG_PCCARD=y CONFIG_PCMCIA_SA1100=y
arch/arm/configs/socfpga_defconfig +1 -1
@@ -15,7 +15,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_SOCFPGA_CHOICE=y CONFIG_MACH_SOCFPGA_CYCLONE5=y CONFIG_ARM_THUMBEE=y # CONFIG_CACHE_L2X0 is not set
arch/arm/configs/spear13xx_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR13XX=y +CONFIG_ARCH_SPEAR13XX_CHOICE=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y # CONFIG_SWP_EMULATE is not set
arch/arm/configs/spear6xx_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y -CONFIG_ARCH_SPEAR6XX=y +CONFIG_ARCH_SPEAR6XX_CHOICE=y CONFIG_BINFMT_MISC=y CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
arch/arm/configs/spitz_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_PXA_SHARPSL=y CONFIG_MACH_AKITA=y CONFIG_MACH_BORZOI=y
arch/arm/configs/stamp9g20_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9G20=y CONFIG_MACH_PORTUXG20=y CONFIG_MACH_STAMP9G20=y
arch/arm/configs/tct_hammer_defconfig +1 -1
@@ -14,7 +14,7 @@ CONFIG_SLOB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S3C24XX=y +CONFIG_ARCH_S3C24XX_CHOICE=y CONFIG_MACH_TCT_HAMMER=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0
arch/arm/configs/tegra_defconfig +1 -1
@@ -23,7 +23,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_TEGRA_CHOICE=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_MACH_HARMONY=y
arch/arm/configs/trizeps4_defconfig +1 -1
@@ -15,7 +15,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y CONFIG_PCCARD=y
arch/arm/configs/u300_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_U300=y +CONFIG_ARCH_U300_CHOICE=y CONFIG_MACH_U300=y CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_SPIDUMMY=y
arch/arm/configs/u8500_defconfig +1 -1
@@ -7,7 +7,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_U8500=y +CONFIG_ARCH_U8500_CHOICE=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y
arch/arm/configs/usb-a9260_defconfig +1 -1
@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91_CHOICE=y CONFIG_ARCH_AT91SAM9260=y CONFIG_MACH_USB_A9260=y CONFIG_AT91_SLOW_CLOCK=y
arch/arm/configs/vexpress_defconfig +1 -1
@@ -21,7 +21,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VEXPRESS_CHOICE=y CONFIG_ARCH_VEXPRESS_CA9X4=y # CONFIG_SWP_EMULATE is not set CONFIG_SMP=y
arch/arm/configs/viper_defconfig +1 -1
@@ -11,7 +11,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_ARCH_VIPER=y CONFIG_IWMMXT=y CONFIG_PCCARD=m
arch/arm/configs/xcep_defconfig +1 -1
@@ -20,7 +20,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLOCK is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_XCEP=y CONFIG_IWMMXT=y CONFIG_NO_HZ=y
arch/arm/configs/zeus_defconfig +1 -1
@@ -6,7 +6,7 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_PXA=y +CONFIG_ARCH_PXA_CHOICE=y CONFIG_MACH_ARCOM_ZEUS=y CONFIG_PCCARD=m CONFIG_PCMCIA_PXA2XX=m
Signature · 1 line
1.7.9.5
PATCH v2 1/1 ARM: initial multiplatform support
In reply to Rob HerringFrom: Rob Herring <[email protected]>
This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now:
* SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled
* We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on.
* Only platforms using common clock framework or no clocks at all can be converted to multi-platform.
* THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big
[Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, socfpga, and vexpress are converted.
v2: This version avoids the kconfig symbol name changes and simply moves multi-platform enabled platform kconfig option out of the choice option and into the platform's mach directory. A separate series fixes DEBUG_LL for multi-platform.
--- arch/arm/Kconfig | 145 +++++++++++++++-------------------- arch/arm/Makefile | 155 ++++++++++++++++++++------------------ arch/arm/boot/compressed/misc.c | 6 ++ arch/arm/include/asm/timex.h | 4 + arch/arm/mach-highbank/Kconfig | 15 ++++ arch/arm/mach-mvebu/Kconfig | 10 +++ arch/arm/mach-mvebu/Makefile | 2 + arch/arm/mach-picoxcell/Kconfig | 14 ++++ arch/arm/mach-socfpga/Kconfig | 16 ++++ arch/arm/mach-vexpress/Kconfig | 16 ++++ arch/arm/mach-vexpress/Makefile | 2 + arch/arm/plat-versatile/Makefile | 2 + 12 files changed, 226 insertions(+), 161 deletions(-) create mode 100644 arch/arm/mach-highbank/Kconfig create mode 100644 arch/arm/mach-picoxcell/Kconfig create mode 100644 arch/arm/mach-socfpga/Kconfig
arch/arm/Kconfig +59 -86
@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILE -config ARCH_SOCFPGA - bool "Altera SOCFPGA family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_GIC - select CACHE_L2X0 - select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_V7 - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GPIO_PL061 if GPIOLIB - select HAVE_ARM_SCU - select SPARSE_IRQ - select USE_OF - help - This enables support for Altera SOCFPGA Cyclone V platform - config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA
@@ -328,24 +310,6 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_VEXPRESS - bool "ARM Ltd. Versatile Express family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_PATA_PLATFORM - select ICST - select NO_IOPORT - select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD - select REGULATOR_FIXED_VOLTAGE if REGULATOR - help - This enables support for the ARM Ltd Versatile Express boards. - config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB
@@ -369,24 +333,6 @@ config ARCH_BCMRING help Support for Broadcom's BCMRing platform. -config ARCH_HIGHBANK - bool "Calxeda Highbank-based" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_GIC - select ARM_TIMER_SP804 - select CACHE_L2X0 - select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU - select HAVE_SMP - select SPARSE_IRQ - select USE_OF - help - Support for the Calxeda Highbank SoC based boards. - config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select CPU_ARM720T
@@ -567,18 +513,6 @@ config ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. -config ARCH_MVEBU - bool "Marvell SOCs with Device Tree support" - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - select COMMON_CLK - help - Support for the Marvell SoC Family with device tree support - config ARCH_DOVE bool "Marvell Dove" select CPU_V7
@@ -699,25 +633,6 @@ config ARCH_TEGRA This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). -config ARCH_PICOXCELL - bool "Picochip picoXcell" - select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select CPU_V6K - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select HAVE_TCM - select NO_IOPORT - select SPARSE_IRQ - select USE_OF - help - This enables support for systems based on the Picochip picoXcell - family of Femtocell devices. The picoxcell support requires device tree - for all boards. - config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" select CPU_ARM926T
@@ -1039,6 +954,58 @@ config ARCH_ZYNQ Support for Xilinx Zynq ARM Cortex A9 Platform endchoice +menuconfig ARCH_MULTIPLATFORM + bool "Multiple platform selection" + select USE_OF + select COMMON_CLK + select SPARSE_IRQ + select MULTI_IRQ_HANDLER + select AUTO_ZRELADDR + depends on MMU + +if ARCH_MULTIPLATFORM + +comment "CPU Core family selection" + +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526, StrongARM)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4T + bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V5 + bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4_V5 + bool + +config ARCH_MULTI_V6 + bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + select CPU_V6 + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V7 + bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + select CPU_V7 + select ARCH_VEXPRESS + default y + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V6_V7 + bool + +config ARCH_MULTI_CPU_AUTO + def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) + select ARCH_MULTI_V5 + +endif + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the
@@ -1066,6 +1033,8 @@ source "arch/arm/mach-gemini/Kconfig" source "arch/arm/mach-h720x/Kconfig" +source "arch/arm/mach-highbank/Kconfig" + source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-iop32x/Kconfig"
@@ -1101,6 +1070,8 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" +source "arch/arm/mach-picoxcell/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/plat-pxa/Kconfig"
@@ -1113,6 +1084,8 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/mach-socfpga/Kconfig" + source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig"
arch/arm/Makefile +80 -75
179 lines not on this page · raw message
arch/arm/boot/compressed/misc.c +6 -0
@@ -25,7 +25,13 @@ unsigned int __machine_arch_type;static void putstr (const char *ptr);extern void error (char *x); +#ifdef CONFIG_ARCH_MULTIPLATFORM +static inline void putc (int c) {} +static inline void flush (void ) {} +static inline void arch_decomp_setup (void ) {} +#else #include <mach/uncompress.h> +#endif #ifdef CONFIG_DEBUG_ICEDCC
arch/arm/include/asm/timex.h +4 -0
@@ -13,7 +13,11 @@#define _ASMARM_TIMEX_H#include <asm/arch_timer.h> +#ifdef CONFIG_ARCH_MULTIPLATFORM +#define CLOCK_TICK_RATE 1000000 +#else #include <mach/timex.h> +#endif typedef unsigned long cycles_t ;
arch/arm/mach-highbank/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +config ARCH_HIGHBANK + bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU + select HAVE_SMP + select SPARSE_IRQ + select USE_OF
arch/arm/mach-mvebu/Kconfig +10 -0
@@ -1,3 +1,13 @@ +config ARCH_MVEBU + bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7 + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + if ARCH_MVEBU menu "Marvell SOC with device tree"
arch/arm/mach-mvebu/Makefile +2 -0
@@ -1,2 +1,4 @@ +ccflags-$(ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + obj-y += system-controller.o obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o
arch/arm/mach-picoxcell/Kconfig new file +14 -0
@@ -0,0 +1,14 @@ +config ARCH_PICOXCELL + bool "Picochip PicoXcell" if ARCH_MULTI_V6 + select ARCH_REQUIRE_GPIOLIB + select ARM_PATCH_PHYS_VIRT + select ARM_VIC + select CPU_V6K + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_TCM + select NO_IOPORT + select SPARSE_IRQ + select USE_OF
arch/arm/mach-socfpga/Kconfig new file +16 -0
@@ -0,0 +1,16 @@ +config ARCH_SOCFPGA + bool "Altera SOCFPGA family" if ARCH_MULTI_V7 + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU + select SPARSE_IRQ + select USE_OF
arch/arm/mach-vexpress/Kconfig +16 -0
@@ -1,3 +1,19 @@ +config ARCH_VEXPRESS + bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_TIMER_SP804 + select CLKDEV_LOOKUP + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + select HAVE_PATA_PLATFORM + select ICST + select NO_IOPORT + select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD + select REGULATOR_FIXED_VOLTAGE if REGULATOR + menu "Versatile Express platform type" depends on ARCH_VEXPRESS
arch/arm/mach-vexpress/Makefile +2 -0
@@ -1,6 +1,8 @@ # # Makefile for the linux kernel. # +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ + -I$(srctree)/arch/arm/plat-versatile/include obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
arch/arm/plat-versatile/Makefile +2 -0
@@ -1,3 +1,5 @@ +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o obj-$(CONFIG_PLAT_VERSATILE_FPGA_IRQ) += fpga-irq.o
Signature · 1 line
1.7.9.5
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 8 lines · Rob Herring
[Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, socfpga, and vexpress are converted.
v2: This version avoids the kconfig symbol name changes and simply moves multi-platform enabled platform kconfig option out of the choice option and into the platform's mach directory. A separate series fixes
DEBUG_LLfor multi-platform.
This looks like a nice start to play with multiplatform, and I guess it would be nice to merge it for v3.7.
arch/arm/Kconfig config MMU · line 258
Quoted 8 lines
arch/arm/Kconfig +1
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILE
Why did you move ARCH_MULTIPLATFORM out of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.
I also still think that we should allow platforms to be part of both multi-platform and single-platform builds, for cases it helps with.
For instance, we could enable one platform to be used in multiplatform kernels with the subset of its board files and device drivers that are possible, while leaving board files that cannot work with sparse-irq and drivers that rely on platform specific headers as "depends on !ARCH_MULTIPLATFORM".
Arnd
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 13 lines · Arnd Bergmann
Quoted 8 lines · Rob Herring
[Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, socfpga, and vexpress are converted.
v2: This version avoids the kconfig symbol name changes and simply moves multi-platform enabled platform kconfig option out of the choice option and into the platform's mach directory. A separate series fixes
DEBUG_LLfor multi-platform.This looks like a nice start to play with multiplatform, and I guess it would be nice to merge it for v3.7.
Quoted 14 lines
arch/arm/Kconfig config MMU · line 258
Quoted 8 lines
arch/arm/Kconfig +1
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILEWhy did you move
ARCH_MULTIPLATFORMout of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.
We don't have to change and of the defconfigs or .config in this patch.
Bisecting the converted platforms is a problem I guess. It can be worked around by setting ARCH_MULTIPLATFORM before configuring. I'm not convinced fixing it is worth the complexity added to kconfig.
Quoted 9 lines
I also still think that we should allow platforms to be part of both multi-platform and single-platform builds, for cases it helps with.
For instance, we could enable one platform to be used in multiplatform kernels with the subset of its board files and device drivers that are possible, while leaving board files that cannot work with sparse-irq and drivers that rely on platform specific headers as "depends on !ARCH_MULTIPLATFORM".
Individual platforms can still do that. I just happened to convert all platforms which have no need to be in both. While you can do that, I don't think we should encourage it. I don't think we want to see platforms partially converted to common clk or sparse irq. The latter is certainly not hard to do.
Rob
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 14 lines · Rob Herring
Quoted 4 lines · Arnd Bergmann
Quoted 4 lines
arch/arm/Kconfig +0
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type"Quoted 8 lines
arch/arm/Kconfig config MMU · line 258
Quoted 2 lines
arch/arm/Kconfig +1
-0+ depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILEWhy did you move
ARCH_MULTIPLATFORMout of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.
Quoted 1 line
We don't have to change and of the defconfigs or .config in this patch.
How does ARCH_MULTIPLATFORM get set then when building the existing defconfig files for the converted platforms?
Quoted 11 lines
Quoted 5 lines
For instance, we could enable one platform to be used in multiplatform kernels with the subset of its board files and device drivers that are possible, while leaving board files that cannot work with sparse-irq and drivers that rely on platform specific headers as "depends on !ARCH_MULTIPLATFORM".
Individual platforms can still do that. I just happened to convert all platforms which have no need to be in both. While you can do that, I don't think we should encourage it. I don't think we want to see platforms partially converted to common clk or sparse irq. The latter is certainly not hard to do.
I was thinking of other cases actually:
* device drivers that we don't really care about much but that rely on a mach/* header file. In some cases it can be hard to clean up those headers, so as an intermediate step, we can just disable the drivers when building multiplatform.
* At least the Samsung platforms have files that are built for separate platforms in a way that does not work across platforms:
arch/arm/plat-samsung/devs.c depends heavily on constants defined in mach/*.h header files. When building for DT-only, we can decide to just not build this file.
Arnd
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 15 lines · Arnd Bergmann
Quoted 14 lines · Rob Herring
Quoted 12 lines · Arnd Bergmann
arch/arm/Kconfig config MMU · line 258
Quoted 6 lines
arch/arm/Kconfig +1
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILEWhy did you move
ARCH_MULTIPLATFORMout of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.
Quoted 4 lines
Quoted 1 line
We don't have to change and of the defconfigs or .config in this patch.
How does
ARCH_MULTIPLATFORMget set then when building the existing defconfig files for the converted platforms?
Ahhh, right. Those need to be updated. It doesn't really matter if ARCH_MULTIPLATFORM is in the choice or not. It matters if we move platforms out of the choice or not. More on that below.
Quoted 12 lines
Quoted 11 lines
Quoted 5 lines
For instance, we could enable one platform to be used in multiplatform kernels with the subset of its board files and device drivers that are possible, while leaving board files that cannot work with sparse-irq and drivers that rely on platform specific headers as "depends on !ARCH_MULTIPLATFORM".
Individual platforms can still do that. I just happened to convert all platforms which have no need to be in both. While you can do that, I don't think we should encourage it. I don't think we want to see platforms partially converted to common clk or sparse irq. The latter is certainly not hard to do.
Quoted 6 lines
I was thinking of other cases actually:
* device drivers that we don't really care about much but that rely on a mach/* header file. In some cases it can be hard to clean up those headers, so as an intermediate step, we can just disable the drivers when building multiplatform.
depends on !ARCH_MULTIPLATFORM ?
Quoted 5 lines
* At least the Samsung platforms have files that are built for separate platforms in a way that does not work across platforms:
arch/arm/plat-samsung/devs.cdepends heavily on constants defined in mach/*.h header files. When building for DT-only, we can decide to just not build this file.
I still think that should be possible on a per platform basis, but why mandate that all platforms do that?
We have ARCH_FOO in the choice today. Assuming we want to keep the choice name as is to not break configs (as Russell wanted), we have to leave this alone. So then we create ARCH_FOO_MULTI for the mult-platform case and also ARCH_FOO_OPTIONS to avoid duplicating all the per mach selects for ARCH_FOO and ARCH_FOO_MULTI. However, then we have ARCH_FOO as a depends all over the tree. I'd like to avoid having to fix-up all those to be depends on ARCH_FOO_OPTIONS or (ARCH_FOO || ARCH_FOO_MULTI).
Rob
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 16 lines · Rob Herring
Quoted 15 lines · Arnd Bergmann
Quoted 14 lines · Rob Herring
Quoted 12 lines · Arnd Bergmann
arch/arm/Kconfig config MMU · line 258
Quoted 6 lines
arch/arm/Kconfig +1
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILEWhy did you move
ARCH_MULTIPLATFORMout of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
We don't have to change and of the defconfigs or .config in this patch.
How does
ARCH_MULTIPLATFORMget set then when building the existing defconfig files for the converted platforms?Ahhh, right. Those need to be updated. It doesn't really matter if
ARCH_MULTIPLATFORMis in the choice or not. It matters if we move platforms out of the choice or not. More on that below.
But if ARCH_MULTIPLATFORM is one of the choice statements rather than a separate option, you don't need to change any of the defconfigs, and you can keep using 'make oldconfig' when bisecting over this commit.
Quoted 9 lines
Quoted 7 lines
I was thinking of other cases actually:
* device drivers that we don't really care about much but that rely on a mach/* header file. In some cases it can be hard to clean up those headers, so as an intermediate step, we can just disable the drivers when building multiplatform.
depends on !ARCH_MULTIPLATFORM ?
Yes, of course, that is what you'd do in in the drivers, but it only works if the same platform can be used both with and without ARCH_MULTIPLATFORM.
Quoted 8 lines
Quoted 5 lines
* At least the Samsung platforms have files that are built for separate platforms in a way that does not work across platforms:
arch/arm/plat-samsung/devs.cdepends heavily on constants defined in mach/*.h header files. When building for DT-only, we can decide to just not build this file.I still think that should be possible on a per platform basis, but why mandate that all platforms do that?
I wasn't suggesting we do that. The platforms that you have already converted are all ok to stay multiplatform-only.
Quoted 7 lines
We have
ARCH_FOOin the choice today. Assuming we want to keep the choice name as is to not break configs (as Russell wanted), we have to leave this alone. So then we createARCH_FOO_MULTIfor the mult-platform case and alsoARCH_FOO_OPTIONSto avoid duplicating all the per mach selects forARCH_FOOandARCH_FOO_MULTI. However, then we haveARCH_FOOas a depends all over the tree. I'd like to avoid having to fix-up all those to be depends onARCH_FOO_OPTIONSor (ARCH_FOO||ARCH_FOO_MULTI).
I've been going back and forth a few times between the different methods when I created the earlier version of this patch, trying to find the one that is least invasive. As you say, creating a new ARCH_FOO_MULTI in parallel with the existing (choice) ARCH_FOO means we have to change all the Kconfig statements that refer to ARCH_FOO. The good news is that I think we now only have to do it inside of the mach-foo directories, which we might want to rework anyway so you can more easily build e.g. a THUMB2 kernel that enables all the ARMv7 platforms but not the ARMv6 ones.
All device drivers that have a dependency on a specific platform should fall into one of two categories:
a) Those using platform specific header files. We just decided to not allow this in multiplatform kernels, so having a dependency on a symbol that only exists for single-platform builds is appropriate.
b) Drivers that only make sense for one platform but can be built anywhere, e.g. after fixing the include path from a). I'd argue that we should allow building them anyway, to improve build coverage, so we should better remove the dependency, or turn it into a more specific one.
Arnd
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 75 lines · Arnd Bergmann
Quoted 16 lines · Rob Herring
Quoted 15 lines · Arnd Bergmann
Quoted 14 lines · Rob Herring
Quoted 12 lines · Arnd Bergmann
arch/arm/Kconfig config MMU · line 258
Quoted 6 lines
arch/arm/Kconfig +1
-0@@ -254,27 +254,9 @@ config MMU # choice prompt "ARM system type" + depends on !ARCH_MULTIPLATFORM default ARCH_VERSATILEWhy did you move
ARCH_MULTIPLATFORMout of the "choice" statement? If we leave it in there, and make it the default, then we don't even have to change the defconfigs any more (except the versatile one, which is no longer the default), which I think is quite clever and helps git-bisecting across this commit.Quoted 8 lines
Quoted 4 lines
Quoted 1 line
We don't have to change and of the defconfigs or .config in this patch.
How does
ARCH_MULTIPLATFORMget set then when building the existing defconfig files for the converted platforms?Ahhh, right. Those need to be updated. It doesn't really matter if
ARCH_MULTIPLATFORMis in the choice or not. It matters if we move platforms out of the choice or not. More on that below.But if
ARCH_MULTIPLATFORMis one of the choice statements rather than a separate option, you don't need to change any of the defconfigs, and you can keep using 'make oldconfig' when bisecting over this commit.Quoted 9 lines
Quoted 7 lines
I was thinking of other cases actually:
* device drivers that we don't really care about much but that rely on a mach/* header file. In some cases it can be hard to clean up those headers, so as an intermediate step, we can just disable the drivers when building multiplatform.
depends on !ARCH_MULTIPLATFORM ?
Yes, of course, that is what you'd do in in the drivers, but it only works if the same platform can be used both with and without
ARCH_MULTIPLATFORM.Quoted 8 lines
Quoted 5 lines
* At least the Samsung platforms have files that are built for separate platforms in a way that does not work across platforms:
arch/arm/plat-samsung/devs.cdepends heavily on constants defined in mach/*.h header files. When building for DT-only, we can decide to just not build this file.I still think that should be possible on a per platform basis, but why mandate that all platforms do that?
I wasn't suggesting we do that. The platforms that you have already converted are all ok to stay multiplatform-only.
Quoted 7 lines
We have
ARCH_FOOin the choice today. Assuming we want to keep the choice name as is to not break configs (as Russell wanted), we have to leave this alone. So then we createARCH_FOO_MULTIfor the mult-platform case and alsoARCH_FOO_OPTIONSto avoid duplicating all the per mach selects forARCH_FOOandARCH_FOO_MULTI. However, then we haveARCH_FOOas a depends all over the tree. I'd like to avoid having to fix-up all those to be depends onARCH_FOO_OPTIONSor (ARCH_FOO||ARCH_FOO_MULTI).I've been going back and forth a few times between the different methods when I created the earlier version of this patch, trying to find the one that is least invasive. As you say, creating a new
ARCH_FOO_MULTIin parallel with the existing (choice)ARCH_FOOmeans we have to change all theKconfigstatements that refer toARCH_FOO. The good news is that I think we now only have to do it inside of the mach-foo directories, which we might want to rework anyway so you can more easily build e.g. a THUMB2 kernel that enables all the ARMv7 platforms but not the ARMv6 ones.All device drivers that have a dependency on a specific platform should fall into one of two categories:
Quoted 8 lines
a) Those using platform specific header files. We just decided to not allow this in multiplatform kernels, so having a dependency on a symbol that only exists for single-platform builds is appropriate.
b) Drivers that only make sense for one platform but can be built anywhere, e.g. after fixing the include path from a). I'd argue that we should allow building them anyway, to improve build coverage, so we should better remove the dependency, or turn it into a more specific one.
Agreed. There are some other cases like clk drivers which are not visible options. But changing those are probably manageable.
So to summarize, I'll make ARCH_MULTIPLATFORM part of the choice. The platforms I converted will stay multi-plat only and don't need additional kconfig options. Additional platforms converted can choose whether they want to support both single and multi platform in the kconfig.
Rob
PATCH v2 1/1 ARM: initial multiplatform support
Quoted 5 lines · Rob Herring
So to summarize, I'll make
ARCH_MULTIPLATFORMpart of the choice. The platforms I converted will stay multi-plat only and don't need additional kconfig options. Additional platforms converted can choose whether they want to support both single and multi platform in the kconfig.
Ok, excellent!
Arnd