libplist: issues with parallel make so disable

index 9c218fb..5356431 100644
@@ -6,6 +6,8 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=ebb5c50ab7cab4baeffba14977030c07 \
 
 DEPENDS = "libxml2 glib-2.0 swig python"
 
+PARALLEL_MAKE = ""
+
 inherit cmake pkgconfig
 
 SRC_URI = "http://www.libimobiledevice.org/downloads/libplist-${PV}.tar.bz2"

new file mode 100644
index 0000000..a77ea9f
@@ -0,0 +1,656 @@
+--- lockdev-1.0.3.orig/debian/liblockdev1-dbg.dirs
++++ lockdev-1.0.3/debian/liblockdev1-dbg.dirs
+@@ -0,0 +1 @@
++usr/share/doc/liblockdev1
+--- lockdev-1.0.3.orig/debian/liblockdev1-dbg.docs
++++ lockdev-1.0.3/debian/liblockdev1-dbg.docs
+@@ -0,0 +1 @@
++README.debug
+--- lockdev-1.0.3.orig/debian/control
++++ lockdev-1.0.3/debian/control
+@@ -0,0 +1,55 @@
++Source: lockdev
++Section: libs
++Priority: optional
++Maintainer: Paweł Więcek <[email protected]>
++Uploaders: Roger Leigh <[email protected]>
++Standards-Version: 3.6.2
++Build-Depends: perl (>= 5.8.0-7), debhelper (>= 4.0.0)
++
++Package: liblockdev1
++Section: libs
++Architecture: any
++Depends: ${shlibs:Depends}, ${misc:Depends}
++Description: Run-time shared library for locking devices
++ It provides a reliable way to put an exclusive lock to
++ devices using _both_ FSSTND and SVr4 methods.
++
++Package: liblockdev1-dev
++Section: libdevel
++Architecture: any
++Depends: liblockdev1 (= ${binary:Version}), libc6-dev, ${misc:Depends}
++Conflicts: liblockdev0-dev, liblockdev0g-dev
++Replaces: liblockdev0-dev, liblockdev0g-dev
++Description: Development library for locking devices
++ It provides a reliable way to put an exclusive lock to
++ devices using _both_ FSSTND and SVr4 methods.
++ .
++ Includes header files and static lib.
++
++Package: liblockdev1-dbg
++Section: debug
++Priority: extra
++Architecture: any
++Depends: liblockdev1 (= ${binary:Version}), liblockdev1-dev (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
++Conflicts: liblockdev0-dbg, liblockdev0g-dbg
++Replaces: liblockdev0-dbg, liblockdev0g-dbg
++Description: Debugging library for locking devices
++ It provides a reliable way to put an exclusive lock to
++ devices using _both_ FSSTND and SVr4 methods.
++ .
++ Includes static and shared debugging and profiling libs,
++ as well as the sources ready for use by gdb.
++
++Package: liblockdev1-perl
++Section: perl
++Architecture: any
++Depends: ${perl:Depends}, ${shlibs:Depends}, ${misc:Depends}
++Conflicts: liblockdev0-perl
++Replaces:  liblockdev0-perl
++Description: perl extension library for locking devices
++ It provides a reliable way to put an exclusive lock to
++ devices using _both_ FSSTND and SVr4 methods.
++ .
++ Includes a shared lib loadable by perl 5 (use LockDev),
++ the module LockDev.pm and its manpage LockDev(3pm) .
++
+--- lockdev-1.0.3.orig/debian/compat
++++ lockdev-1.0.3/debian/compat
+@@ -0,0 +1 @@
++4
+--- lockdev-1.0.3.orig/debian/liblockdev1-perl.dirs
++++ lockdev-1.0.3/debian/liblockdev1-perl.dirs
+@@ -0,0 +1 @@
++usr/share/perl5
+--- lockdev-1.0.3.orig/debian/changelog
++++ lockdev-1.0.3/debian/changelog
+@@ -0,0 +1,334 @@
++lockdev (1.0.3-1.4) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Don't install copyright in both liblockdev1 and liblockdev1-dbg as
++    they share the same folde rin /usr/share/doc via symlink (Closes:
++    #563600)
++  * Use binary:Version instead of Source-Version
++
++ -- Christoph Egger <[email protected]>  Fri, 19 Feb 2010 19:10:38 +0100
++
++lockdev (1.0.3-1.3) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Don't remove non-existant file (Closes: #549731)
++  * Add ${shlibs:Depends} to -perl and -db (Closes: #553240, #553242)
++  *  -dbg package is section debug
++  * add misc:Depends
++
++ -- Christoph Egger <[email protected]>  Wed, 30 Dec 2009 20:50:40 +0100
++
++lockdev (1.0.3-1.2) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Brown paperbag release: Fix uninstallability of the -dbg-package.
++    Closes: #400676
++
++ -- Andreas Barth <[email protected]>  Tue, 28 Nov 2006 08:52:55 +0100
++
++lockdev (1.0.3-1.1) unstable; urgency=low
++
++  * Non-maintainer upload.
++  * Fix postinst. Closes: #366384
++    + don't use numerical compares for version history, but
++      dpkg --compare-versions
++    + do never wait for someone entering a key - that could be in
++      non-interactive mode ...
++  * Add upgrade information into NEWS.Debian.
++
++ -- Andreas Barth <[email protected]>  Mon, 27 Nov 2006 13:11:32 +0100
++
++lockdev (1.0.3-1) unstable; urgency=low
++
++  * New release
++  * Distinguish character and block devices when creating SVR4 type lockfiles
++    (closes: #331249)
++  * Fixed some typos in comments
++
++ -- Paweł Więcek <[email protected]>  Thu, 20 Apr 2006 21:11:48 +0200
++
++lockdev (1.0.2-1) unstable; urgency=low
++
++  * New release.
++  * debian/control:
++    + Added myself as an uploader.  Thanks to Pawel Wiecek for granting
++      me co-maintainership.
++    + Build-Depend upon debhelper 4.
++    + Update to Standards-Version 3.6.2.
++  * debian/copyright:
++    + Update FSF address.
++    + Add myself as a contributor.
++  * debian/compat: Use debhelper v4.
++  * Remove all postinst and preinst templates; debhelper v4 generates
++    ldconfig calls automatically.
++  * Devices within subdirectories of /dev are locked properly, using
++    ':' as a path delimiter in the device lock name.  For example,
++    /dev/pts/2 is locked as /var/lock/LCK..pts:2
++    (Closes: #115109, #135299).
++  * Device major and minor numbers are computed using GNU libc
++    builtins, rather than kernel headers (Closes: #331139).
++  * src/sample.c debugging is amended to use the proper debugging
++    functions (Closes: #331255).
++
++ -- Roger Leigh <[email protected]>  Mon,  3 Oct 2005 20:55:51 +0100
++
++lockdev (1.0.1-7) unstable; urgency=low
++
++  * Applied patch from Aurelien Jarno <[email protected]> to support
++    GNU/k*BSD (closes: #302457)
++  * Fixed patch from 1.0.1-5.1 NMU to clean after itself (!)
++
++ -- Pawel Wiecek <[email protected]>  Thu, 19 May 2005 21:25:43 +0200
++
++lockdev (1.0.1-6) unstable; urgency=low
++
++  * Applied patch from Kristof Koehler
++    <[email protected]> to fix behavior when device is
++    locked by process with different UID (closes: #215807)
++
++ -- Pawel Wiecek <[email protected]>  Thu, 22 Jan 2004 14:34:28 +0100
++
++lockdev (1.0.1-5.1) unstable; urgency=low
++
++  * NMU
++  * Use -fPIC code in shared lib.  Closes: #190770
++
++ -- LaMont Jones <[email protected]>  Sat,  7 Jun 2003 19:27:24 -0600
++
++lockdev (1.0.1-5) unstable; urgency=low
++
++  * Completely repackaged, so it now uses standard procedures instead of some
++    mysterious stuff (closes: #166600)
++  * Updated standards version
++  * Included perl 5.8 patch from -4.1 NMU (closes: #158941)
++  * Fixed a couple of lintian errors and warnings
++
++ -- Pawel Wiecek <[email protected]>  Fri, 25 Apr 2003 14:17:02 +0200
++
++lockdev (1.0.1-4.1) unstable; urgency=low
++
++  * NMU for perl 5.8.
++  * Bump perl build-dependency to >= 5.8.0-7.
++
++ -- Colin Watson <[email protected]>  Sat, 31 Aug 2002 00:29:56 +0100
++
++lockdev (1.0.1-4) unstable; urgency=low
++
++  * New maintainer (closes: #112558)
++  * Removed umask calls (closes: #115108)
++  * Now calls ldconfig in postrm instead of prerm
++
++ -- Pawel Wiecek <[email protected]>  Tue,  9 Apr 2002 14:39:54 +0200
++
++lockdev (1.0.1-3) unstable; urgency=low
++
++  * debian/copyright: upstream location changed back to the Debian ftp
++    archives
++  * debian/control (Standards-Version): bumped to 3.5.6
++    (Maintainer): set to Debian QA Team
++  * debian/policy: standards-version bumped to 3.5.6
++
++ -- Gergely Nagy <[email protected]>  Sun, 16 Sep 2001 22:34:51 +0200
++
++lockdev (1.0.1-2) unstable; urgency=low
++
++  * Added missing symlinks to some manual pages (Closes: #99549)
++  * Standards-Version bumped to 3.5.5
++  * Only call ldconfig upon configure and remove
++
++ -- Gergely Nagy <[email protected]>  Sun, 10 Jun 2001 09:41:20 +0200
++
++lockdev (1.0.1-1) unstable; urgency=low
++
++  * New maintainer
++  * Acknowledge NMU: Closes: #41522
++  * Recompiled with new perl (Closes: #80662)
++  * Corrected missing symlink bug (Closes: #88888)
++  * Updated to latest perl policy (Closes: #95410)
++  * Added build-depends
++  * Bumped Standards-Version to 3.5.4
++
++ -- Gergely Nagy <[email protected]>  Wed, 23 May 2001 17:24:23 +0200
++
++lockdev (1.0.0) unstable; urgency=low
++
++  * added management of pseudo device /dev/tty , thanx to Alan Cox.
++  * added unconditional malloc of supplied device argoment.
++  * changed name of the shared lib to end in .so
++  * changed Makefile.PL because the perl manpage disappeared.
++  * Changed symbols in the API as suggested by Daniel Quinlan and 
++    Erik Troan. Changed soname accordingly.
++  * Corrected manpages and added LSB proposal (draft 2).
++  * corrected cua device management: use linux/major.h to determine the
++    cua major number; conditioned to __linux__
++  * Changed LICENSE file to hold the LGPL 2.1
++
++ -- Fabrizio Polacco <[email protected]>  Wed,  1 Dec 1999 12:59:10 +0200
++
++lockdev (0.11.1) unstable; urgency=low
++
++  * NMU for the perl upgrade. Closes: #41522
++  * Corrected the rules files to conform to perl policy 1.0.1.
++  * Compiled with perl-5.005.
++  * Corrected the location of the license.
++  * Upgraded standards-version to 2.5.1
++
++ -- Raphael Hertzog <[email protected]>  Mon, 19 Jul 1999 20:51:00 +0200
++
++lockdev (0.11) unstable; urgency=low
++
++  * Avoided repetute locking of the semaphore.
++  * Corrected special case of semaphore misbehaviour (found while
++    crosschecking between two instancies running under gdb).
++  * Added modification on-the-fly of major number of device from 4 to 5
++    in case it was referring to one of the 64 cua devices; it now locks
++    the major+minor numbers of the corresponding ttyS device. The name
++    remains unaffected, as it could be an arbitrary name.
++    (Thanx to Daniel Quinlan <[email protected]>)
++  * Tryed to use fcntl instead of flock, after suggestion of Daniel
++    Quinlan, to permit use on NFS mounted partitions.
++    I wasn't able to make it correctly work, so I conditioned the
++    changes and left the code there, for further (future)
++    investigations. Any help highly appreciated.
++  * changed third file (LCK..<pid>) to have three dots, and made it stay
++    there, as a quick reference. It doesn't hurt, and shouw the pid with
++    a simple ls -l
++  * Added full text of LGPL licence instead of GPL one added in the
++    previous version (oops).
++
++ -- Fabrizio Polacco <[email protected]>  Wed,  2 Jun 1999 15:58:03 +0300
++
++lockdev (0.10) unstable; urgency=low
++
++  * Added ttylock.h as Compatibility API to AIX. Programs written for
++    that environment can be linked directly to lockdev library.
++    (On AIX the symbols are in libc, so special care should be used)
++  * changed location of manpages to /usr/share/man.
++  * changed the name of the source to lockdev_0.10.tar.gz
++  * changed address of FSF in Copyright file, added the full GPL text as
++    LICENSE (only in the source), corrected name of the mailing list.
++  * changed name of changelog, just to make lintian happier.
++  * corrected name of docs dir for perl package.
++
++ -- Fabrizio Polacco <[email protected]>  Thu,  8 Apr 1999 21:04:53 +0300
++
++liblockdev (0.9a) frozen unstable; urgency=low
++
++  * Added more tests in postinst of liblockdev0g-dbg, to avoid strange
++    problems encountered by Adam P. Harris (closes: #22565)
++
++ -- Fabrizio Polacco <[email protected]>  Mon, 18 May 1998 15:21:12 +0300
++
++liblockdev (0.9) frozen unstable; urgency=low
++
++  * cleaned symlinks in docs dirs.
++  * changed libs symlinks from /usr/lib to /lib
++  * stripped main shared library.
++  * Corrected wrong shlibs dependency (thanx to Hamish Moffatt, 
++    closes: #22282).
++  * Changed dependency of -dev from libc6 to libc6-dev, 
++    thanx to James Troup (closes: #16476).
++  * Added -I.. in Makefile.PL to allow compilation of the perl part even
++    when the -dev package isn't installed (thanx to Martin Schulze for
++    the patch) closes: #15834
++
++ -- Fabrizio Polacco <[email protected]>  Tue, 12 May 1998 13:39:27 +0300
++
++liblockdev (0.8) unstable; urgency=low
++
++  * updated manpage (degugging section).
++  * added environment variable to set debug value, and signals 
++    to change those values at runtime (if compiled with -DDEBUG).
++  * avoided symlink to /usr/src changing .stab in asm source 
++    file (overwritten implicit rule to produce asm source).
++    Thanx to Martin Schulze <joey> for the help.
++  * changed dbg package to install shared debug lib in 
++    /usr/lib/debug and profile lib in /usr/lib/profile.
++  * splitted debian/rules in included debian/policy
++  * cleaned Makefile and changed to build debug shared lib.
++    Thanx to Yann Dirson.
++  * added change in umask value to allow full permissions to lock 
++    files.  (this is questionable: would it be better to add a 
++    suid program to check and remove dangling locks?)
++
++ -- Fabrizio Polacco <[email protected]>  Tue, 23 Dec 1997 11:26:10 +0200
++
++liblockdev (0.7) unstable; urgency=low
++
++  * cleaned Makefile and debian/rules
++  * change in Makefile.PL to allow pristine compilation on new systems
++    (closes: #15834, thanx to Martin Schulze).
++  * added -dbg package with debug and profile libs.
++  * problem with lenght of dev_t in glibc for printf: cast needed :-)
++  * corrected ftp address in copyright file.
++
++ -- Fabrizio Polacco <[email protected]>  Sun, 30 Nov 1997 01:00:50 +0200
++
++liblockdev (0.6) unstable; urgency=low
++
++  * added symlink to dirs in /usr/doc (one dir for all packages),
++     now /usr/doc/liblockdev is a symlink installed by -dev package,
++     as the liblockdev.a and liblockdev.so symlinks.
++     Instead, lblockdev-perl installs a copy of the docs because
++     it doesn't depend on the run-time binary package (as -dev does).
++  * cleaned spreading in the distribution: 
++     source and run-time to section 'libs', development into 'devel',
++     perl module into 'interpreters' (waiting for a perl section).
++  * created extension perl library LockDev:: with manpage LockDev(3pm)
++     and packaged as liblockdev0-perl.
++  * moved symlink so.0 -> so.0.6 to runtime package.
++  * added unlink of semaphore file (not really needed, just to clean up)
++  * corrected error in Synopsis of manpage (oops).
++  * cleaned source code: changed ANSI-C definition of functions to K&R,
++     as recommended in GNU coding style (but not for indentation).
++     Added ANSI-C prototypes for internal functions (exported one 
++     already have them in .h interface file.
++  * cleaned rules file, got rid of unneeded libc5 compatibility.
++  * Moved back include of stdio.h from lockdev.h to .c (closes:Bug#14154)
++     Thanx to Juan Cespedes <[email protected]>
++  * Corrected debian/rules to have binary-arch rule (closes:Bug#14062)
++
++ -- Fabrizio Polacco <[email protected]>  Wed, 22 Oct 1997 13:45:34 +0300
++
++liblockdev (0.5) unstable; urgency=low
++
++  * moved to libc6 (glibc2); added a "g" after soname in package name.
++  * added rules to build also compatibility libc5 libs.
++
++ -- Fabrizio Polacco <[email protected]>  Thu, 25 Sep 1997 11:51:22 +0300
++
++liblockdev0 (0.4) unstable; urgency=low
++
++  * Changed priority from extra to optional.
++  * cleaned Makefile and added separate static/debug library.
++  * Cleaned include file.
++  * Added global var liblockdev_debug for debugging level
++  * Added 2 functions to set and reset debugging level (only in static lib)
++
++ -- Fabrizio Polacco <[email protected]>  Sat,  6 Sep 1997 02:20:01 +0300
++
++liblockdev0 (0.3) unstable; urgency=low
++
++  * avoided stripping of static lib (compiled with -DDEBUG)
++  * added semaphore lock to avoid race condition in
++    removing stale locks (thanx to Barak Pearlmutter)
++  * changed unlink of stale lock to a complex and
++    convoluted way to avoid conflicts between us and another
++    process that doesn't use this library. Still exists the
++    possibility of a conflict between two other processes that
++    don't use this library, but we are safe.
++  * cleaned code in lock_dev()
++
++ -- Fabrizio Polacco <[email protected]>  Fri,  5 Sep 1997 11:05:21 +0300
++
++liblockdev0 (0.2) unstable; urgency=low
++
++  * fixed shared lib links.
++
++ -- Fabrizio Polacco <[email protected]>  Thu,  4 Sep 1997 19:08:38 +0300
++
++liblockdev0 (0.1) unstable; urgency=low
++
++  * Initial Release.
++
++ -- Fabrizio Polacco <[email protected]>  Thu,  4 Sep 1997 14:13:23 +0300
+--- lockdev-1.0.3.orig/debian/liblockdev1-dev.manpages
++++ lockdev-1.0.3/debian/liblockdev1-dev.manpages
+@@ -0,0 +1 @@
++docs/lockdev.3
+--- lockdev-1.0.3.orig/debian/NEWS
++++ lockdev-1.0.3/debian/NEWS
+@@ -0,0 +1,8 @@
++lockdev (1.0.3-1.1) unstable; urgency=low
++
++  The format of device lock files has changed.
++
++  All programs that have locked device files using the old version of
++  liblockdev needs to be restarted.
++
++ -- Andreas Barth <[email protected]>  Mon, 27 Nov 2006 13:13:37 +0100
+--- lockdev-1.0.3.orig/debian/rules
++++ lockdev-1.0.3/debian/rules
+@@ -0,0 +1,145 @@
++#!/usr/bin/make -f
++# Sample debian/rules that uses debhelper.
++# GNU copyright 1997 to 1999 by Joey Hess.
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++
++ifndef PERL
++PERL = /usr/bin/perl
++endif
++
++archlib = `$(PERL) -MConfig -e 'print $$Config{installarchlib}'`
++config  = INSTALLDIRS=vendor
++config += INSTALLMAN1DIR=${d_man}/man1
++config += INSTALLMAN3DIR=${d_man}/man3
++config += INSTALLPRIVLIB=${d_ulib}/perl5
++config += INSTALLARCHLIB=${d_build}$(archlib)
++PERLVERSION=`$(PERL) -MConfig -e 'print $$Config{version}'`
++
++
++
++CFLAGS = -Wall -g
++
++ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
++	CFLAGS += -O0
++else
++	CFLAGS += -O2
++endif
++ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
++	INSTALL_PROGRAM += -s
++endif
++
++# shared library versions, option 1
++version=1.0.3
++major=1
++# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
++#version=`ls src/.libs/lib*.so.* | \
++# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
++#major=`ls src/.libs/lib*.so.* | \
++# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
++
++configure: configure-stamp
++configure-stamp:
++	dh_testdir
++	# Add here commands to configure the package.
++
++	touch configure-stamp
++
++
++build: build-stamp
++build-stamp: configure-stamp 
++	dh_testdir
++
++	# Add here commands to compile the package.
++	$(MAKE)
++
++	touch build-stamp
++
++clean:
++	dh_testdir
++	dh_testroot
++	rm -f build-stamp configure-stamp
++
++	# Add here commands to clean up after the build process.
++	-$(MAKE) distclean
++
++	dh_clean
++
++install: build
++	dh_testdir
++	dh_testroot
++	dh_clean -k
++	dh_installdirs
++
++	# Add here commands to install the package into debian/
++	$(MAKE) install_run basedir=$(CURDIR)/debian/liblockdev1/usr
++	$(MAKE) install_debug basedir=$(CURDIR)/debian/liblockdev1-dbg/usr
++	$(MAKE) install_profile basedir=$(CURDIR)/debian/liblockdev1-dbg/usr
++	$(MAKE) install_dev basedir=$(CURDIR)/debian/liblockdev1-dev/usr
++	cd LockDev && $(MAKE) pure_install $(config) PREFIX=$(CURDIR)/debian/liblockdev1-perl/usr
++
++	mv $(CURDIR)/debian/liblockdev1-perl/usr/lib/perl5/LockDev.pm \
++	  $(CURDIR)/debian/liblockdev1-perl/usr/share/perl5
++
++	ln -s lockdev.3.gz \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/man/man3/dev_lock.3.gz
++	ln -s lockdev.3.gz \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/man/man3/dev_unlock.3.gz
++	ln -s lockdev.3.gz \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/man/man3/dev_relock.3.gz
++	ln -s lockdev.3.gz \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/man/man3/dev_testlock.3.gz
++	ln -s lockdev.3.gz \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/man/man3/liblockdev.3.gz
++	ln -s liblockdev.$(version).so \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/lib/liblockdev.so
++	ln -s liblockdev.$(version).so \
++	  $(CURDIR)/debian/liblockdev1/usr/lib/liblockdev.so.$(major)
++	
++	ln -s liblockdev1 \
++	  $(CURDIR)/debian/liblockdev1-dev/usr/share/doc/liblockdev1-dev
++	ln -s liblockdev1 \
++	  $(CURDIR)/debian/liblockdev1-dbg/usr/share/doc/liblockdev1-dbg
++
++
++# Build architecture-independent files here.
++binary-indep: build install
++# We have nothing to do by default.
++
++# Build architecture-dependent files here.
++binary-arch: build install
++	dh_testdir
++	dh_testroot
++	dh_installchangelogs ChangeLog
++	dh_installdocs
++	rm $(CURDIR)/debian/liblockdev1-dbg/usr/share/doc/liblockdev1/c*
++#	rm $(CURDIR)/debian/liblockdev1-dbg/usr/share/doc/liblockdev1/NEWS.Debia*
++	dh_installexamples
++#	dh_install
++#	dh_installmenu
++#	dh_installdebconf	
++#	dh_installlogrotate
++#	dh_installemacsen
++#	dh_installpam
++#	dh_installmime
++#	dh_installinit
++#	dh_installcron
++#	dh_installinfo
++	dh_installman
++	dh_link
++	dh_strip -Xprofile
++	dh_compress
++	dh_fixperms
++	dh_perl
++#	d_python
++	dh_makeshlibs -X usr/lib/debug -X usr/lib/profile
++	dh_installdeb
++	dh_shlibdeps
++	dh_gencontrol
++	dh_md5sums
++	dh_builddeb
++
++binary: binary-indep binary-arch
++.PHONY: build clean binary-indep binary-arch binary install configure
+--- lockdev-1.0.3.orig/debian/copyright
++++ lockdev-1.0.3/debian/copyright
+@@ -0,0 +1,49 @@
++liblockdev is (c) 1997, 1999 by Fabrizio Polacco <[email protected]>
++
++   This program is free software; you can redistribute it and/or 
++   modify it under the terms of the GNU Lesser General Public 
++   License (LGPL) as published by the Free Software Foundation; 
++   version 2.1 dated February 1999.
++
++   This program is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++   GNU General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General 
++   Public License (LGPL) along with this program;  if not, write 
++   to the Free Software Foundation, Inc.,
++   51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
++
++On Debian GNU/Linux systems, the complete text of the GNU Library General
++Public License can be found in `/usr/share/common-licenses/LGPL'.
++
++It's primary source is the Debian archives:
++ ftp://ftp.debian.org/debian/pool/main/l/lockdev/
++
++================ CREDITS ================
++
++Barak Pearlmutter <[email protected]>
++	- code revision 
++	- suggestion for the use of the semaphore.
++Juan Cespedes <[email protected]>
++	- code revision 
++Daniel Quinlan <[email protected]>
++	- suggestion to support the cua devices.
++	- suggestions for naming of functions.
++Raphael Hertzog <[email protected]>
++	- NMU for new perl
++Adam P. Harris
++	- changes in debian postinst.
++Martin Schulze
++	- changes in perl makefile
++	- suggestions for changes in assembler stage for debug.
++Hamish Moffatt, James Troup
++	- dependencies check.
++Yann Dirson
++	- suggestions for a debugging shared library.
++Roger Leigh
++	- updated to ISO C89 C.
++	- work with modern glibc dev_t.
++	- work with devices in subdirectories, á la DevFS
++
+--- lockdev-1.0.3.orig/debian/liblockdev1.postinst
++++ lockdev-1.0.3/debian/liblockdev1.postinst
+@@ -0,0 +1,22 @@
++#!/bin/sh -e
++
++if [ "$1" = "configure" ] && dpkg --compare-versions "$2" lt-nl 1.0.3-1;
++then
++  echo
++  echo "WARNING"
++  echo "Format of device lock files have changed, you will need to restart all"
++  echo "programs that have locked device files using the old version of liblockdev."
++  echo
++
++  if ls /var/lock/LCK.[0-9]* 2>/dev/null
++  then
++    echo "Right now the following programs use old lockfiles:"
++    echo
++    ps -p `cat /var/lock/LCK.[0-9]*`
++    echo
++  fi
++fi
++
++#DEBHELPER#
++
++exit 0
+--- lockdev-1.0.3.orig/debian/liblockdev1-dev.dirs
++++ lockdev-1.0.3/debian/liblockdev1-dev.dirs
+@@ -0,0 +1,2 @@
++usr/share/man/man3
++usr/share/doc

new file mode 100644
index 0000000..788f346
@@ -0,0 +1,28 @@
+DESCRIPTION = "Manage character and block device lockfiles."
+HOMEPAGE = "http://anonscm.debian.org/gitweb/?p=lockdev/lockdev.git;a=summary"
+
+LICENSE = "LGPLv2.1"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=d8045f3b8f929c1cb29a1e3fd737b499"
+
+PV = "1.0.3"
+
+SRC_URI = "http://ftp.de.debian.org/debian/pool/main/l/lockdev/lockdev_${PV}.orig.tar.gz \
+           file://lockdev_1.0.3-1.4.patch \
+"
+
+SRC_URI[md5sum] = "64b9c1b87b125fc348e892e24625524a"
+SRC_URI[sha256sum] = "ccae635d7ac3fdd50897eceb250872b3d9a191d298f213e7f0c836910d869f82"
+
+S = "${WORKDIR}/lockdev-${PV}"
+
+do_compile() {
+  oe_runmake CC="${CC}" LD="${LD}" shared
+}
+
+do_install() {
+  oe_runmake basedir="${D}" incdir="${D}${includedir}" libdir="${D}${libdir}" install_dev
+}
+
+FILES_{PN} = "${includedir}/* \
+              ${libdir}/* \
+"

index 142b2e2..f3cb39e 100644
@@ -1,14 +1,14 @@
 DESCRIPTION = "USB CEC Adaptor communication Library"
 HOMEPAGE = "http://libcec.pulse-eight.com/"
 
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=185ead350fec5fc223da0f65f9a802af"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=5e8e16396992369f73f3d28875f846da"
 
-DEPENDS = "udev"
+DEPENDS = "udev liblockdev"
 
 PR = "r1"
-PV = "1.4.0"
-SRCREV = "2db8981f49fbd167ddbbf19c1fbadd064abc332a"
+PV = "1.8.2"
+SRCREV = "34a9cecdd92f6b2844f9c4054da202b152ab2217"
 SRC_URI = "git://github.com/Pulse-Eight/libcec.git"
 
 S = "${WORKDIR}/git"