x86: Dump family, model, stepping of the BSP
PATCH 1/1 x86: Dump family, model, stepping of the BSP
From: Borislav Petkov <[email protected]>
When acting on a user bug report, we find ourselves constantly asking for /proc/cpuinfo in order to know the exact family, model, stepping of the CPU in question. Instead of having to ask this, add this to dmesg so that it is visible and no ambiguities can ensue from looking at the official name string of the CPU coming from CPUID and trying to map it to f/m/s.
Output then looks like this:
[ 0.146041] smpboot: CPU0: AMD FX(tm)-8100 Eight-Core Processor (fam: 15 model: 01 stepping: 02)
--- arch/x86/kernel/cpu/common.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
arch/x86/kernel/cpu/common.c +5 -3
@@ -1022,14 +1022,16 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)printk (KERN_CONT "%s " , vendor);if (c->x86_model_id[0 ]) -printk (KERN_CONT "%s" , c->x86_model_id); +printk (KERN_CONT "%s" ,strim (c->x86_model_id));else printk (KERN_CONT "%d86" , c->x86); +printk (KERN_CONT " (fam: %02x model: %02x" , c->x86, c->x86_model); +if (c->x86_mask || c->cpuid_level >=0 ) -printk (KERN_CONT " stepping %02x\n" , c->x86_mask); +printk (KERN_CONT " stepping: %02x)\n" , c->x86_mask);else -printk (KERN_CONT "\n" ); +printk (KERN_CONT ")\n" );print_cpu_msr (c); }
Signature · 1 line
1.7.11.rc1
Quoted 9 lines · Borislav Petkov
From: Borislav Petkov <[email protected]>
When acting on a user bug report, we find ourselves constantly asking for
/proc/cpuinfoin order to know the exact family, model, stepping of the CPU in question. Instead of having to ask this, add this to dmesg so that it is visible and no ambiguities can ensue from looking at the official name string of the CPU coming from CPUID and trying to map it to f/m/s.
Quoted 3 lines
Output then looks like this:
[ 0.146041] smpboot: CPU0: AMD FX(tm)-8100 Eight-Core Processor (fam: 15 model: 01 stepping: 02)
Guys, any comments on this one? I think dumping the f/m/s is very helpful.
Thanks.
Quoted 33 lines
Signed-off-by Borislav Petkov <[email protected]>--- arch/x86/kernel/cpu/common.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)arch/x86/kernel/cpu/common.c +5
-3@@ -1022,14 +1022,16 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)printk (KERN_CONT "%s " , vendor);if (c->x86_model_id[0 ]) -printk (KERN_CONT "%s" , c->x86_model_id); +printk (KERN_CONT "%s" ,strim (c->x86_model_id));else printk (KERN_CONT "%d86" , c->x86); +printk (KERN_CONT " (fam: %02x model: %02x" , c->x86, c->x86_model); +if (c->x86_mask || c->cpuid_level >=0 ) -printk (KERN_CONT " stepping %02x\n" , c->x86_mask); +printk (KERN_CONT " stepping: %02x)\n" , c->x86_mask);else -printk (KERN_CONT "\n" ); +printk (KERN_CONT ")\n" );print_cpu_msr (c); }Signature · 1 line
1.7.11.rc1
Signature · 8 lines
Regards/Gruss, Boris. Advanced Micro Devices GmbH Einsteinring 24, 85609 Dornach GM: Alberto Bozzo Reg: Dornach, Landkreis Muenchen HRB Nr. 43632 WEEE Registernr: 129 19551
[tip:x86/debug] x86/debug: Dump family, model, stepping of the boot CPU
In reply to Borislav PetkovCommit-ID: 924e101a7ab6f884047f4344e5f1154a4bcd63a6 Gitweb: http://git.kernel.org/tip/924e101a7ab6f884047f4344e5f1154a4bcd63a6 Author: Borislav Petkov <[email protected]> AuthorDate: Fri, 14 Sep 2012 18:37:46 +0200 Committer: Ingo Molnar <[email protected]> CommitDate: Wed, 19 Sep 2012 17:12:01 +0200
x86/debug: Dump family, model, stepping of the boot CPU
When acting on a user bug report, we find ourselves constantly asking for /proc/cpuinfo in order to know the exact family, model, stepping of the CPU in question.
Instead of having to ask this, add this to dmesg so that it is visible and no ambiguities can ensue from looking at the official name string of the CPU coming from CPUID and trying to map it to f/m/s.
Output then looks like this:
[ 0.146041] smpboot: CPU0: AMD FX(tm)-8100 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
--- arch/x86/kernel/cpu/common.c | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-)
arch/x86/kernel/cpu/common.c +5 -3
@@ -1023,14 +1023,16 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)printk (KERN_CONT "%s " , vendor);if (c->x86_model_id[0 ]) -printk (KERN_CONT "%s" , c->x86_model_id); +printk (KERN_CONT "%s" ,strim (c->x86_model_id));else printk (KERN_CONT "%d86" , c->x86); +printk (KERN_CONT " (fam: %02x, model: %02x" , c->x86, c->x86_model); +if (c->x86_mask || c->cpuid_level >=0 ) -printk (KERN_CONT " stepping %02x\n" , c->x86_mask); +printk (KERN_CONT ", stepping: %02x)\n" , c->x86_mask);else -printk (KERN_CONT "\n" ); +printk (KERN_CONT ")\n" );print_cpu_msr (c); }