Skip to contentSkip to conversation

ALSA: ASoC: add DT bindings for CS4271

PATCH Applied Daniel Mack 2 participants 2 messages Sep 27, 2012 – Sep 28, 2012

Subsystems (4)
Device tree bindings Sound ASoC Cirrus Logic audio codecs
lore
Share & tools
lore

Daniel Mack

author
#0 lore raw

PATCH 1/1 ALSA: ASoC: add DT bindings for CS4271

Apart from pure matching, the bindings also support setting the the reset gpio line.

Signed-off-by Daniel Mack <[email protected]>
Cc Alexander Sverdlin <[email protected]>
---
 Documentation/devicetree/bindings/sound/cs4271.txt | 36 ++++++++++++++++++++++
 sound/soc/codecs/cs4271.c                          | 24 +++++++++++++--
 2 files changed, 57 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/cs4271.txt
Documentation/devicetree/bindings/sound/cs4271.txt new file +36 -0
new file mode 100644
index 0000000..c81b5fd
@@ -0,0 +1,36 @@
+Cirrus Logic CS4271 DT bindings
+
+This driver supports both the I2C and the SPI bus.
+
+Required properties:
+
+ - compatible: "cirrus,cs4271"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the i2c address
+
+
+Optional properties:
+
+ - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
+		!RESET pin
+
+Examples:
+
+	codec_i2c: cs4271@10 {
+		compatible = "cirrus,cs4271";
+		reg = <0x10>;
+		reset-gpio = <&gpio 23 0>;
+	};
+
+	codec_spi: cs4271@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0x0>;
+		reset-gpio = <&gpio 23 0>;
+		spi-max-frequency = <6000000>;
+	};
+
sound/soc/codecs/cs4271.c +21 -3
index 9eb01d7..f994af3 100644
@@ -22,12 +22,14 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/tlv.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
 #include <sound/cs4271.h>
 
 #define CS4271_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \

@@ -458,6 +460,14 @@ static int cs4271_soc_resume(struct snd_soc_codec *codec)
 #define cs4271_soc_resume	NULL
 #endif /* CONFIG_PM */
 
+#ifdef CONFIG_OF
+static const struct of_device_id cs4271_dt_ids[] = {
+	{ .compatible = "cirrus,cs4271", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, cs4271_dt_ids);
+#endif
+
 static int cs4271_probe(struct snd_soc_codec *codec)
 {
 	struct cs4271_private *cs4271 = snd_soc_codec_get_drvdata(codec);

@@ -465,6 +475,12 @@ static int cs4271_probe(struct snd_soc_codec *codec)
 	int ret;
 	int gpio_nreset = -EINVAL;
 
+#ifdef CONFIG_OF
+	if (of_match_device(cs4271_dt_ids, codec->dev))
+		gpio_nreset = of_get_named_gpio(codec->dev->of_node,
+						"reset-gpio", 0);
+#endif
+
 	if (cs4271plat && gpio_is_valid(cs4271plat->gpio_nreset))
 		gpio_nreset = cs4271plat->gpio_nreset;
 

@@ -569,6 +585,7 @@ static struct spi_driver cs4271_spi_driver = {
 	.driver = {
 		.name	= "cs4271",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(cs4271_dt_ids),
 	},
 	.probe		= cs4271_spi_probe,
 	.remove		= __devexit_p(cs4271_spi_remove),

@@ -608,6 +625,7 @@ static struct i2c_driver cs4271_i2c_driver = {
 	.driver = {
 		.name	= "cs4271",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(cs4271_dt_ids),
 	},
 	.id_table	= cs4271_i2c_id,
 	.probe		= cs4271_i2c_probe,
Signature · 1 line
1.7.11.4
Applied
#1 lore raw
Quoted 2 lines · Daniel Mack

Apart from pure matching, the bindings also support setting the the reset gpio line.

Applied, thanks.