New: fbcon sleeping function call from illegal context
Subsystems (2)
http://bugme.osdl.org/show_bug.cgi?id=500
Summary: fbcon sleeping function call from illegal context
Kernel Version: 2.5.66
Status: NEW
Severity: normal
Owner: [email protected]
Submitter: [email protected]
Distribution:RedHat 8.0
Hardware Environment:
processor : 0vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1342.862
cache size : 256 KBfdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2637.82
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) 00:04.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) 00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) 00:0a.0 Multimedia audio controller: Yamaha Corporation YMF-754 [DS-1E Audio Controller]
00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) 00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
Software Environment:
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_MMU=yCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# General setup
#CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_SYSCTL=yCONFIG_LOG_BUF_SHIFT=14
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=yCONFIG_OBSOLETE_MODPARM=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_USE_3DNOW=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not setCONFIG_X86_TSC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=mCONFIG_X86_CPUID=m
# CONFIG_EDD is not setCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI Support
#
# CONFIG_ACPI is not setCONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not setCONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=y
# CONFIG_SCx200 is not set
# CONFIG_PCI_LEGACY_PROC is not setCONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=mCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not setCONFIG_BLK_DEV_RAM=mCONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=yCONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_BLK_DEV_GENERIC=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDE_TCQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not setCONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=yCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not setCONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#CONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_NETLINK_DEV=mCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_FILTER=yCONFIG_UNIX=mCONFIG_NET_KEY=mCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_XFRM_USER is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_LIMIT=mCONFIG_IP_NF_MATCH_MAC=mCONFIG_IP_NF_MATCH_PKTTYPE=mCONFIG_IP_NF_MATCH_MARK=mCONFIG_IP_NF_MATCH_MULTIPORT=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_DSCP=mCONFIG_IP_NF_MATCH_AH_ESP=mCONFIG_IP_NF_MATCH_LENGTH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_TCPMSS=mCONFIG_IP_NF_MATCH_HELPER=mCONFIG_IP_NF_MATCH_STATE=mCONFIG_IP_NF_MATCH_CONNTRACK=mCONFIG_IP_NF_MATCH_UNCLEAN=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_MIRROR=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not setCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_DSCP=mCONFIG_IP_NF_TARGET_MARK=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not setCONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not setCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not setCONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# C#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=512CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#CONFIG_I2C=mCONFIG_I2C_ALGOBIT=mCONFIG_I2C_PHILIPSPAR=mCONFIG_I2C_ELV=mCONFIG_I2C_VELLEMAN=m
# CONFIG_SCx200_ACB is not setCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ELEKTOR=mCONFIG_I2C_CHARDEV=mCONFIG_I2C_PROC=m
#
# I2C Hardware Sensors Mainboard support
#
# CONFIG_I2C_ALI15X3 is not setCONFIG_I2C_AMD756=mCONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_PIIX4 is not set
#
# I2C Hardware Sensors Chip support
#CONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_LM75=m
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not setCONFIG_RTC=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=m
# CONFIG_AGP3 is not set
# CONFIG_AGP_INTEL is not setCONFIG_AGP_VIA=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not setCONFIG_EXT3_FS=yCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not setCONFIG_MINIX_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not setCONFIG_DEVPTS_FS=yCONFIG_TMPFS=yCONFIG_RAMFS=y
#
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not setCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not setCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not setCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not setCONFIG_SMB_NLS=yCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
#
# Graphics support
#CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not setCONFIG_FB_VESA=yCONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=yCONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not setCONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not setCONFIG_SND_VERBOSE_PRINTK=yCONFIG_SND_DEBUG=yCONFIG_SND_DEBUG_MEMORY=yCONFIG_SND_DEBUG_DETECT=y
#
# Generic devices
#CONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not setCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not setCONFIG_SND_YMFPCI=m
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_SONICVIBES is not setCONFIG_SND_VIA82XX=m
#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_OHCI_HCD=mCONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# SCSI support is needed for USB Storage
#
#
# USB Human Interface Devices (HID)
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support #
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_SLAB=yCONFIG_DEBUG_IOVIRT=yCONFIG_MAGIC_SYSRQ=yCONFIG_DEBUG_SPINLOCK=yCONFIG_KALLSYMS=yCONFIG_DEBUG_SPINLOCK_SLEEP=yCONFIG_FRAME_POINTER=y
#
# Security options
## CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC32 is not setCONFIG_ZLIB_INFLATE=yCONFIG_X86_BIOS_REBOOT=y
Problem Description:
Five minutes after booting up I get an endless stream of the following until I reboot.
Mar 25 09:17:36 dad kernel: Debug: sleeping function called from illegal context at mm/slab.c:1723 Mar 25 09:17:36 dad kernel: Call Trace: Mar 25 09:17:36 dad kernel: [<c011d7bf>] __might_sleep+0x4f/0x90 Mar 25 09:17:36 dad kernel: [<c0149611>] kmalloc+0x1a1/0x1c0 Mar 25 09:17:36 dad kernel: [<c0233a45>] accel_cursor+0xd5/0x300 Mar 25 09:17:36 dad kernel: [<c0215976>] e100_get_link_state+0x36/0xa0 Mar 25 09:17:36 dad kernel: [<c0233e65>] fb_vbl_handler+0x85/0xa0 Mar 25 09:17:36 dad kernel: [<e103d9ed>] init_stall_timer+0x6d/0x80 [uhci_hcd] Mar 25 09:17:36 dad kernel: [<e103d813>] stall_callback+0x253/0x3c0 [uhci_hcd] Mar 25 09:17:36 dad kernel: [<c012a9d6>] update_process_times+0x46/0x50 Mar 25 09:17:36 dad kernel: [<c02324c0>] cursor_timer_handler+0x0/0x40 Mar 25 09:17:36 dad kernel: [<c02324e1>] cursor_timer_handler+0x21/0x40 Mar 25 09:17:36 dad kernel: [<c012ab32>] run_timer_softirq+0x132/0x3c0 Mar 25 09:17:36 dad kernel: [<c010bdec>] do_IRQ+0x1fc/0x320 Mar 25 09:17:36 dad kernel: [<c0125de1>] do_softirq+0xa1/0xb0 Mar 25 09:17:36 dad kernel: [<c010bdec>] do_IRQ+0x1fc/0x320 Mar 25 09:17:36 dad kernel: [<c0116c01>] apm_bios_call_simple+0x61/0xa0 Mar 25 09:17:36 dad kernel: [<c0109fdc>] common_interrupt+0x18/0x20 Mar 25 09:17:36 dad kernel: [<c0106fe7>] default_idle+0x27/0x30 Mar 25 09:17:36 dad kernel: [<c0116ef2>] apm_cpu_idle+0xc2/0x150 Mar 25 09:17:36 dad kernel: [<c0116e30>] apm_cpu_idle+0x0/0x150 Mar 25 09:17:36 dad kernel: [<c0106fc0>] default_idle+0x0/0x30 Mar 25 09:17:36 dad kernel: [<c0107061>] cpu_idle+0x31/0x40 Mar 25 09:17:36 dad kernel: [<c0105000>] rest_init+0x0/0x30 Mar 25 09:17:36 dad kernel:
Steps to reproduce:
make, install, and boot a 2.5.66 kernel with the above configuration. Precisely (within a couple of seconds) after booting, the above appears. This started with the bk archive as of March 22nd about 6 AM CST. It continues through 2.5.66-bk current as of 25 Mar.
Please try my patch I sent to Ben. I attached it to this email for people to try it.
drivers/video/console/fbcon.c +55 -30
@@ -172,8 +172,9 @@* Internal routines */ static void fbcon_set_display (struct vc_data *vc,int init,int logo); +static void accel_cursor (struct vc_data *vc,struct fb_info *info, +struct fb_cursor *cursor,int yy);static __inline__int real_y (struct display *p,int ypos); -static void fb_vbl_handler (int irq,void *dummy,struct pt_regs *fp);static __inline__void updatescrollmode (struct display *p,struct vc_data *vc);static __inline__void ywrap_up (struct vc_data *vc,int count);static __inline__void ywrap_down (struct vc_data *vc,int count);
@@ -194,6 +195,34 @@ }#endif +static void fb_callback (void *private) +{ +struct fb_info *info = (struct fb_info *) private; +struct display *p = &fb_display[fg_console]; +struct vc_data *vc = vc_cons[fg_console].d; +struct fb_cursor cursor; + +if (!info || !cursor_on) +return ; + +if (vbl_cursor_cnt && --vbl_cursor_cnt ==0 ) { + cursor.set =0 ; + +if (!cursor_drawn) + cursor.set =FB_CUR_SETCUR ; +accel_cursor (vc, info, &cursor,real_y (p, vc->vc_y)); + cursor_drawn ^=1 ; + vbl_cursor_cnt = cursor_blink_rate; + } +} + +static void fb_vbl_handler (int irq,void *dev_id,struct pt_regs *fp) +{ +struct fb_info *info = dev_id; + +schedule_work (&info->queue); +} +static void cursor_timer_handler (unsigned long dev_addr); static struct timer_list cursor_timer =
@@ -203,7 +232,7 @@ {struct fb_info *info = (struct fb_info *) dev_addr; -fb_vbl_handler (0 , info,NULL ); +schedule_work (&info->queue); cursor_timer.expires = jiffies +HZ /50 ;add_timer (&cursor_timer); }
@@ -290,14 +319,14 @@ const unsigned short *s) {unsigned short charmask = vc->vc_hi_font_mask ?0x1ff :0xff ; -unsigned int width = (vc->vc_font.width +7 )/8 ; +unsigned int width = (vc->vc_font.width +7 ) >>3 ;unsigned int cellsize = vc->vc_font.height * width;unsigned int maxcnt = info->pixmap.size/cellsize;unsigned int shift_low =0 , mod = vc->vc_font.width %8 ;unsigned int shift_high =8 , size, pitch, cnt, k;unsigned int buf_align = info->pixmap.buf_align -1 ;unsigned int scan_align = info->pixmap.scan_align -1 ; -unsigned int idx = vc->vc_font.width/8 ; +unsigned int idx = vc->vc_font.width >>3 ;u8 mask, *src, *dst, *dst0;while (count) {
@@ -307,7 +336,7 @@ cnt = k = count; image->width = vc->vc_font.width * cnt; - pitch = (image->width +7 )/8 + scan_align; + pitch = ((image->width +7 ) >>3 ) + scan_align; pitch &= ~scan_align; size = pitch * vc->vc_font.height + buf_align; size &= ~buf_align;
@@ -338,7 +367,7 @@ const unsigned short *s) {unsigned short charmask = vc->vc_hi_font_mask ?0x1ff :0xff ; -unsigned int width = vc->vc_font.width/8 ; +unsigned int width = vc->vc_font.width >>3 ;unsigned int cellsize = vc->vc_font.height * width;unsigned int maxcnt = info->pixmap.size/cellsize;unsigned int scan_align = info->pixmap.scan_align -1 ;
@@ -411,7 +440,7 @@ int c, int ypos, int xpos) { unsigned short charmask = vc->vc_hi_font_mask ? 0x1ff : 0xff; -unsigned int width = (vc->vc_font.width +7 )/8 ; +unsigned int width = (vc->vc_font.width +7 ) >>3 ;unsigned int scan_align = info->pixmap.scan_align -1 ;unsigned int buf_align = info->pixmap.buf_align -1 ;int bgshift = (vc->vc_hi_font_mask) ?13 :12 ;
@@ -559,6 +588,15 @@ vc = (struct vc_data *)kmalloc (sizeof (struct vc_data ),GFP_ATOMIC ); +if (!vc) { +if (softback_buf) +kfree ((void *) softback_buf); +return NULL ; + } + +/* Initialize the work queue */ +INIT_WORK (&info->queue, fb_callback, info); +/* Setup default font */ vc->vc_font.data = font->data; vc->vc_font.width = font->width;
@@ -956,8 +994,8 @@accel_putcs (vc, info, s, count,real_y (p, ypos), xpos); } -void accel_cursor (struct vc_data *vc,struct fb_info *info,struct fb_cursor *cursor, -int yy) +static void accel_cursor (struct vc_data *vc,struct fb_info *info, +struct fb_cursor *cursor,int yy) {unsigned short charmask = vc->vc_hi_font_mask ?0x1ff :0xff ;int bgshift = (vc->vc_hi_font_mask) ?13 :12 ;
@@ -986,7 +1024,15 @@ size = ((width +7 ) >>3 ) * height; data =kmalloc (size,GFP_KERNEL ); + +if (!data)return ; + mask =kmalloc (size,GFP_KERNEL ); + +if (!mask) { +kfree (data); +return ; + }if (cursor->set &FB_CUR_SETSIZE ) {memset (data,0xff , size);
@@ -1101,27 +1147,6 @@ } } -static void fb_vbl_handler (int irq,void *dev_id,struct pt_regs *fp) -{ -struct fb_info *info = dev_id; -struct display *p = &fb_display[fg_console]; -struct vc_data *vc = vc_cons[fg_console].d; -struct fb_cursor cursor; - -if (!cursor_on) -return ; - -if (vbl_cursor_cnt && --vbl_cursor_cnt ==0 ) { - cursor.set =0 ; - -if (!cursor_drawn) - cursor.set =FB_CUR_SETCUR ; -accel_cursor (vc, info, &cursor,real_y (p, vc->vc_y)); - cursor_drawn ^=1 ; - vbl_cursor_cnt = cursor_blink_rate; - } -} -static int scrollback_phys_max =0 ;static int scrollback_max =0 ;static int scrollback_current =0 ;
drivers/video/softcursor.c +1 -0
@@ -44,6 +44,7 @@if (info->cursor.mask)kfree (info->cursor.mask); info->cursor.mask =kmalloc (dsize,GFP_KERNEL ); +if (!info->cursor.mask)return -ENOMEM ;if (cursor->mask)memcpy (info->cursor.mask, cursor->mask, dsize);else
include/linux/fb.h +3 -1
@@ -2,6 +2,7 @@#define _LINUX_FB_H#include <linux/tty.h> +#include <linux/workqueue.h> #include <asm/types.h> #include <asm/io.h>
@@ -406,8 +407,9 @@struct fb_fix_screeninfo fix;/* Current fix */ struct fb_monspecs monspecs;/* Current Monitor specs */ struct fb_cursor cursor;/* Current cursor */ -struct fb_cmap cmap;/* Current cmap */ +struct work_struct queue;/* Framebuffer event queue */ struct fb_pixmap pixmap;/* Current pixmap */ +struct fb_cmap cmap;/* Current cmap */ struct fb_ops *fbops;char *screen_base;/* Virtual address */ struct vc_data *display_fg;/* Console visible on this display */
Quoted 2 lines · James Simmons
Please try my patch I sent to Ben. I attached it to this email for people to try it.
This is not against stock (can't remember applying a patch) 2.5.66; I get Rejects:
root@gswi1164:/usr/src/linux-2.5.66# patch -p1 < ~jochen/tmp/fbcon-illegal-context.diff patching file drivers/video/console/fbcon.c Hunk #3 FAILED at 232. Hunk #8 succeeded at 588 with fuzz 2. Hunk #10 FAILED at 1024. Hunk #11 FAILED at 1147. 3 out of 11 hunks FAILED -- saving rejects to file drivers/video/console/fbcon.c.rej patching file drivers/video/softcursor.c patching file include/linux/fb.h Hunk #2 FAILED at 407. 1 out of 2 hunks FAILED -- saving rejects to file include/linux/fb.h.rej
Signature · 1 line
#include <~/.signature>: permission denied