Skip to contentSkip to conversation

ALSA: aloop - add locking to timer access

PATCH Applied Omair Mohammed Abdullah 3 participants 4 messages Sep 29, 2012 – Oct 8, 2012 Sound

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ALSA: aloop - add locking to timer access

When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic.

Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this.

---
 sound/drivers/aloop.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/drivers/aloop.c +6 -0
index 5a34355..0fe6d64 100644
@@ -120,6 +120,7 @@ struct loopback_pcm {
 	unsigned int last_drift;
 	unsigned long last_jiffies;
 	struct timer_list timer;
+	spinlock_t timer_lock;
 };
 
 static struct platform_device *devices[SNDRV_CARDS];
@@ -170,6 +171,7 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	unsigned long tick;
 	unsigned int rate_shift = get_rate_shift(dpcm);
 
+	spin_lock(&dpcm->timer_lock);
 	if (rate_shift != dpcm->pcm_rate_shift) {
 		dpcm->pcm_rate_shift = rate_shift;
 		dpcm->period_size_frac = frac_pos(dpcm, dpcm->pcm_period_size);
@@ -182,12 +184,15 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	tick = (tick + dpcm->pcm_bps - 1) / dpcm->pcm_bps;
 	dpcm->timer.expires = jiffies + tick;
 	add_timer(&dpcm->timer);
+	spin_unlock(&dpcm->timer_lock);
 }
 
 static inline void loopback_timer_stop(struct loopback_pcm *dpcm)
 {
+	spin_lock(&dpcm->timer_lock);
 	del_timer(&dpcm->timer);
 	dpcm->timer.expires = 0;
+	spin_unlock(&dpcm->timer_lock);
 }
 
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
@@ -667,6 +672,7 @@ static int loopback_open(struct snd_pcm_substream *substream)
 	dpcm->substream = substream;
 	setup_timer(&dpcm->timer, loopback_timer_function,
 		    (unsigned long)dpcm);
+	spin_lock_init(&dpcm->timer_lock);
 
 	cable = loopback->cables[substream->number][dev];
 	if (!cable) {
Signature · 1 line
1.7.4.1
Applied
#1 lore raw

At Sat, 29 Sep 2012 12:24:05 +0530,

Quoted 7 lines · Omair Mohammed Abdullah

When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic.

Quoted 5 lines

Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this.

Thanks, applied.

Takashi

Quoted 51 lines
---
 sound/drivers/aloop.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/drivers/aloop.c +6 -0
index 5a34355..0fe6d64 100644
@@ -120,6 +120,7 @@ struct loopback_pcm {
 	unsigned int last_drift;
 	unsigned long last_jiffies;
 	struct timer_list timer;
+	spinlock_t timer_lock;
 };
 
 static struct platform_device *devices[SNDRV_CARDS];
@@ -170,6 +171,7 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	unsigned long tick;
 	unsigned int rate_shift = get_rate_shift(dpcm);
 
+	spin_lock(&dpcm->timer_lock);
 	if (rate_shift != dpcm->pcm_rate_shift) {
 		dpcm->pcm_rate_shift = rate_shift;
 		dpcm->period_size_frac = frac_pos(dpcm, dpcm->pcm_period_size);
@@ -182,12 +184,15 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	tick = (tick + dpcm->pcm_bps - 1) / dpcm->pcm_bps;
 	dpcm->timer.expires = jiffies + tick;
 	add_timer(&dpcm->timer);
+	spin_unlock(&dpcm->timer_lock);
 }
 
 static inline void loopback_timer_stop(struct loopback_pcm *dpcm)
 {
+	spin_lock(&dpcm->timer_lock);
 	del_timer(&dpcm->timer);
 	dpcm->timer.expires = 0;
+	spin_unlock(&dpcm->timer_lock);
 }
 
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
@@ -667,6 +672,7 @@ static int loopback_open(struct snd_pcm_substream *substream)
 	dpcm->substream = substream;
 	setup_timer(&dpcm->timer, loopback_timer_function,
 		    (unsigned long)dpcm);
+	spin_lock_init(&dpcm->timer_lock);
 
 	cable = loopback->cables[substream->number][dev];
 	if (!cable) {
Signature · 1 line
1.7.4.1
#2 lore raw
Quoted 9 lines · Takashi Iwai

At Sat, 29 Sep 2012 12:24:05 +0530,

Quoted 7 lines · Omair Mohammed Abdullah

When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic.

Quoted 7 lines
Quoted 5 lines

Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this.

Thanks, applied.

Sorry should have mentioned earlier, but can you also CC stable on this one (if not done already :))

Quoted 55 lines

Takashi

Quoted 51 lines
---
 sound/drivers/aloop.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/drivers/aloop.c +6 -0
index 5a34355..0fe6d64 100644
@@ -120,6 +120,7 @@ struct loopback_pcm {
 	unsigned int last_drift;
 	unsigned long last_jiffies;
 	struct timer_list timer;
+	spinlock_t timer_lock;
 };
 
 static struct platform_device *devices[SNDRV_CARDS];
@@ -170,6 +171,7 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	unsigned long tick;
 	unsigned int rate_shift = get_rate_shift(dpcm);
 
+	spin_lock(&dpcm->timer_lock);
 	if (rate_shift != dpcm->pcm_rate_shift) {
 		dpcm->pcm_rate_shift = rate_shift;
 		dpcm->period_size_frac = frac_pos(dpcm, dpcm->pcm_period_size);
@@ -182,12 +184,15 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	tick = (tick + dpcm->pcm_bps - 1) / dpcm->pcm_bps;
 	dpcm->timer.expires = jiffies + tick;
 	add_timer(&dpcm->timer);
+	spin_unlock(&dpcm->timer_lock);
 }
 
 static inline void loopback_timer_stop(struct loopback_pcm *dpcm)
 {
+	spin_lock(&dpcm->timer_lock);
 	del_timer(&dpcm->timer);
 	dpcm->timer.expires = 0;
+	spin_unlock(&dpcm->timer_lock);
 }
 
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
@@ -667,6 +672,7 @@ static int loopback_open(struct snd_pcm_substream *substream)
 	dpcm->substream = substream;
 	setup_timer(&dpcm->timer, loopback_timer_function,
 		    (unsigned long)dpcm);
+	spin_lock_init(&dpcm->timer_lock);
 
 	cable = loopback->cables[substream->number][dev];
 	if (!cable) {
Signature · 1 line
1.7.4.1
Signature · 1 line
~Vinod
#3 lore raw

At Mon, 08 Oct 2012 13:45:12 +0530,

Quoted 14 lines · Vinod Koul
Quoted 12 lines · Takashi Iwai

At Sat, 29 Sep 2012 12:24:05 +0530,

Quoted 10 lines · Omair Mohammed Abdullah

When the loopback timer handler is running, calling del_timer() (for STOP trigger) will not wait for the handler to complete before deactivating the timer. The timer gets rescheduled in the handler as usual. Then a subsequent START trigger will try to start the timer using add_timer() with a timer pending leading to a kernel panic.

Serialize the calls to add_timer() and del_timer() using a spin lock to avoid this.

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Thanks, applied.

Sorry should have mentioned earlier, but can you also CC stable on this one (if not done already :))

Yes, I tagged already :)
Thanks for reminder, though.

Takashi

Quoted 60 lines
Quoted 55 lines

Takashi

Quoted 51 lines
---
 sound/drivers/aloop.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
sound/drivers/aloop.c +6 -0
index 5a34355..0fe6d64 100644
@@ -120,6 +120,7 @@ struct loopback_pcm {
 	unsigned int last_drift;
 	unsigned long last_jiffies;
 	struct timer_list timer;
+	spinlock_t timer_lock;
 };
 
 static struct platform_device *devices[SNDRV_CARDS];
@@ -170,6 +171,7 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	unsigned long tick;
 	unsigned int rate_shift = get_rate_shift(dpcm);
 
+	spin_lock(&dpcm->timer_lock);
 	if (rate_shift != dpcm->pcm_rate_shift) {
 		dpcm->pcm_rate_shift = rate_shift;
 		dpcm->period_size_frac = frac_pos(dpcm, dpcm->pcm_period_size);
@@ -182,12 +184,15 @@ static void loopback_timer_start(struct loopback_pcm *dpcm)
 	tick = (tick + dpcm->pcm_bps - 1) / dpcm->pcm_bps;
 	dpcm->timer.expires = jiffies + tick;
 	add_timer(&dpcm->timer);
+	spin_unlock(&dpcm->timer_lock);
 }
 
 static inline void loopback_timer_stop(struct loopback_pcm *dpcm)
 {
+	spin_lock(&dpcm->timer_lock);
 	del_timer(&dpcm->timer);
 	dpcm->timer.expires = 0;
+	spin_unlock(&dpcm->timer_lock);
 }
 
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
@@ -667,6 +672,7 @@ static int loopback_open(struct snd_pcm_substream *substream)
 	dpcm->substream = substream;
 	setup_timer(&dpcm->timer, loopback_timer_function,
 		    (unsigned long)dpcm);
+	spin_lock_init(&dpcm->timer_lock);
 
 	cable = loopback->cables[substream->number][dev];
 	if (!cable) {
Signature · 1 line
1.7.4.1
Signature · 1 line
~Vinod