Skip to contentSkip to conversation

h2200: Add support for iPAQ h2200 palmtop

PATCH Superseded Lukasz Dalek 2 participants 23 messages Oct 2, 2012 – Oct 3, 2012 Arm (32-bit)

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/3 h2200: Add support for iPAQ h2200 palmtop

Add basic support for HP iPAQ h2200 palmtop. h2200 palmtop was targeted to general consumers. It has 64 MB of RAM, 32 MB flash. No intergrated Wi-Fi nor Ethernet. Based on Intel PXA255 processor. It was shipped with Windows CE 4.2 operating system.

---
Changes for v5:
- Fixed Makefile to use $(obj)

 board/h2200/Makefile       |   49 ++++++++++++++
 board/h2200/h2200-header.S |   27 ++++++++
 board/h2200/h2200.c        |   53 +++++++++++++++
 boards.cfg                 |    1 +
 include/configs/h2200.h    |  156 ++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 286 insertions(+), 0 deletions(-)
 create mode 100644 board/h2200/Makefile
 create mode 100644 board/h2200/h2200-header.S
 create mode 100644 board/h2200/h2200.c
 create mode 100644 include/configs/h2200.h
board/h2200/Makefile new file +49 -0
new file mode 100644
index 0000000..51b1a9e
@@ -0,0 +1,49 @@
+#
+# h2200 Support
+#
+# Copyright (C) 2012 Lukasz Dalek <[email protected]>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= h2200.o
+
+SRCS	:= $(COBJS:.o=.c) h2200-header.S
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all: $(LIB) $(obj)h2200-header.bin
+
+$(obj)h2200-header.o: h2200-header.S
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)h2200-header.bin: $(obj)h2200-header.o
+	$(OBJCOPY) -O binary $< $@
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/h2200/h2200-header.S new file +27 -0
new file mode 100644
index 0000000..c335bfe
@@ -0,0 +1,27 @@
+/*
+ * iPAQ h2200 header
+ *
+ * Copyright (C) 2012 Lukasz Dalek <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+	.word 0xea0003fe /* b 0x1000 */
+
+	.org 0x40
+	.ascii "ECEC"
+
+	.org 0x1000 - 1
+	.byte 0x0
board/h2200/h2200.c new file +53 -0

53 lines not on this page · raw message

boards.cfg +1 -0
index b4e0d3c..ab10938 100644
@@ -282,6 +282,7 @@ dvlhost                      arm         ixp
 pdnb3                        arm         ixp         pdnb3               prodrive
 scpu                         arm         ixp         pdnb3               prodrive       -           pdnb3:SCPU
 balloon3                     arm         pxa
+h2200                        arm         pxa
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
include/configs/h2200.h new file +156 -0

156 lines not on this page · raw message

Signature · 1 line
1.7.8.6
#1 lore raw

PATCH v5 2/3 pxa: Add code to examine cpu model and revision

Add function which return CPU model and revision which can be used for cpu detection.

---
Changes for v5:
- Changed commit message

 arch/arm/cpu/pxa/cpuinfo.c          |   11 +++++++++--
 arch/arm/include/asm/arch-pxa/pxa.h |   13 +++++++++++++
 2 files changed, 22 insertions(+), 2 deletions(-)
arch/arm/cpu/pxa/cpuinfo.c +9 -2
index f1cdd40..bab6340 100644
@@ -24,9 +24,11 @@
 #include <errno.h>
 #include <linux/compiler.h>
 
-#define	CPU_MASK_PXA_REVID	0x00f
+#define	CPU_MASK_PXA_PRODID	0x000003f0
+#define	CPU_MASK_PXA_REVID	0x0000000f
+
+#define	CPU_MASK_PRODREV	(CPU_MASK_PXA_PRODID | CPU_MASK_PXA_REVID)
 
-#define	CPU_MASK_PXA_PRODID	0x3f0
 #define	CPU_VALUE_PXA25X	0x100
 #define	CPU_VALUE_PXA27X	0x110
 
@@ -51,6 +53,11 @@ int cpu_is_pxa27x(void)
 	return id == CPU_VALUE_PXA27X;
 }
 
+uint32_t pxa_get_cpu_revision(void)
+{
+	return pxa_get_cpuid() & CPU_MASK_PRODREV;
+}
+
 #ifdef	CONFIG_DISPLAY_CPUINFO
 static const char *pxa25x_get_revision(void)
 {
arch/arm/include/asm/arch-pxa/pxa.h +13 -0
index 49c6552..b67d8f2 100644
@@ -22,8 +22,21 @@
 #ifndef	__PXA_H__
 #define	__PXA_H__
 
+#define PXA255_A0	0x00000106
+#define PXA250_C0	0x00000105
+#define PXA250_B2	0x00000104
+#define PXA250_B1	0x00000103
+#define PXA250_B0	0x00000102
+#define PXA250_A1	0x00000101
+#define PXA250_A0	0x00000100
+#define PXA210_C0	0x00000125
+#define PXA210_B2	0x00000124
+#define PXA210_B1	0x00000123
+#define PXA210_B0	0x00000122
+
 int cpu_is_pxa25x(void);
 int cpu_is_pxa27x(void);
+uint32_t pxa_get_cpu_revision(void);
 void pxa2xx_dram_init(void);
 
 #endif	/* __PXA_H__ */
Signature · 1 line
1.7.8.6
#2 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

In reply to Lukasz Dalek

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v5:
- Surrendered #include <usb.h> with CONFIGs

 board/h2200/h2200.c     |   17 +++++++++++++++++
 boards.cfg              |    1 +
 include/configs/h2200.h |   27 +++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 0 deletions(-)
board/h2200/h2200.c +17 -0
index 3076306..617bb04 100644
@@ -22,9 +22,20 @@
 #include <asm/arch/pxa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/io.h>
+#ifdef CONFIG_H2200_USBETH
+# include <usb.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* We have RAM, disable cache */
@@ -36,6 +47,12 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
 	return 0;
 }
 
boards.cfg +1 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp         pdnb3               prodriv
 scpu                         arm         ixp         pdnb3               prodrive       -           pdnb3:SCPU
 balloon3                     arm         pxa
 h2200                        arm         pxa
+h2200_usbeth                 arm         pxa         h2200               -              -           h2200:H2200_USBETH
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
include/configs/h2200.h +27 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
 #endif /* __CONFIG_H */
Signature · 1 line
1.7.8.6
#3 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v5:
- Surrendered #include <usb.h> with CONFIGs

 board/h2200/h2200.c     |   17 +++++++++++++++++
 boards.cfg              |    1 +
 include/configs/h2200.h |   27 +++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 11 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp        

pdnb3 prodriv scpu arm ixp
pdnb3 prodrive - pdnb3:SCPU balloon3
arm pxa

 h2200                        arm         pxa
+h2200_usbeth                 arm         pxa         h2200               -

I told you to enable the USB ethernet by default, so why do you add this board?

[...]

btw. http://www.denx.de/wiki/U-Boot/Patches esp. the In-reply-to part.

Best regards,
Marek Vasut

#4 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Quoted 16 lines · Marek Vasut

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

  board/h2200/h2200.c     |   17 +++++++++++++++++
  boards.cfg              |    1 +
  include/configs/h2200.h |   27 +++++++++++++++++++++++++++
  3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 11 lines
Quoted 10 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm ixp
pdnb3 prodrive - pdnb3:SCPU balloon3
arm pxa
h2200 arm pxa
+h2200_usbeth arm pxa h2200 -

I told you to enable the USB ethernet by default, so why do you add this board?

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

?ukasz Da?ek

#5 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 39 lines · Marek Vasut
Quoted 30 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

  board/h2200/h2200.c     |   17 +++++++++++++++++
  boards.cfg              |    1 +
  include/configs/h2200.h |   27 +++++++++++++++++++++++++++
  3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 12 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

arm pxa

Quoted 7 lines
Quoted 4 lines

h2200 arm pxa

+h2200_usbeth arm pxa h2200
-

I told you to enable the USB ethernet by default, so why do you add this board?

Quoted 4 lines

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Best regards,
Marek Vasut

#6 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Quoted 38 lines · Marek Vasut

Dear ?ukasz Da?ek,

Quoted 36 lines · Marek Vasut
Quoted 35 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

   board/h2200/h2200.c     |   17 +++++++++++++++++
   boards.cfg              |    1 +
   include/configs/h2200.h |   27 +++++++++++++++++++++++++++
   3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 10 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

Quoted 6 lines

arm pxa

h2200 arm pxa

+h2200_usbeth arm pxa h2200
-

I told you to enable the USB ethernet by default, so why do you add this board?

Quoted 7 lines
Quoted 4 lines

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Because easier is to type make h2200_usbeth_config than modifiy config.

?ukasz Da?ek

#7 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 49 lines · Marek Vasut
Quoted 48 lines

Dear ?ukasz Da?ek,

Quoted 45 lines · Marek Vasut
Quoted 31 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

   board/h2200/h2200.c     |   17 +++++++++++++++++
   boards.cfg              |    1 +
   include/configs/h2200.h |   27 +++++++++++++++++++++++++++
   3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 13 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm
ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

arm pxa

Quoted 8 lines
Quoted 5 lines

h2200 arm pxa

+h2200_usbeth arm pxa h2200

-

I told you to enable the USB ethernet by default, so why do you add this board?

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Quoted 6 lines
Quoted 4 lines

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Because easier is to type make h2200_usbeth_config than modifiy config.

Why don't you enable the USB ethernet by default for "h2200" target then?

Best regards,
Marek Vasut

#8 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Quoted 51 lines · Marek Vasut

Dear ?ukasz Da?ek,

Quoted 49 lines · Marek Vasut
Quoted 48 lines

Dear ?ukasz Da?ek,

Quoted 35 lines · Marek Vasut
Quoted 34 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

board/h2200/h2200.c | 17 +++++++++++++++++
boards.cfg | 1 +
include/configs/h2200.h | 27 +++++++++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 17 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm
ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

arm pxa

h2200 arm pxa

+h2200_usbeth arm pxa h2200

Quoted 7 lines
Quoted 3 lines
Quoted 1 line
   -

I told you to enable the USB ethernet by default, so why do you add this board?

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Quoted 5 lines
Quoted 1 line

Because easier is to type make h2200_usbeth_config than modifiy config.

Why don't you enable the USB ethernet by default for "h2200" target then?

Best regards,
Marek Vasut

I will enable. This two entries really look weird.

?ukasz Da?ek

#9 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 57 lines · Marek Vasut
Quoted 56 lines

Dear ?ukasz Da?ek,

Quoted 54 lines · Marek Vasut
Quoted 52 lines

Dear ?ukasz Da?ek,

Quoted 41 lines · Marek Vasut
Quoted 31 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

board/h2200/h2200.c | 17 +++++++++++++++++
boards.cfg | 1 +
include/configs/h2200.h | 27 +++++++++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 13 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm
ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

arm pxa

Quoted 8 lines
Quoted 5 lines

h2200 arm pxa

+h2200_usbeth arm pxa h2200

   -

I told you to enable the USB ethernet by default, so why do you add this board?

Quoted 4 lines

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Because easier is to type make h2200_usbeth_config than modifiy config.

Why don't you enable the USB ethernet by default for "h2200" target then?

Best regards,
Marek Vasut

I will enable. This two entries really look weird.

Ok, so we're clear there'll be one entry with ethernet enabled called "h2200", yes?

Best regards,
Marek Vasut

#10 lore raw

PATCH v5 3/3 h2200: Add USB CDC ethernet support

Quoted 57 lines · Marek Vasut

Dear ?ukasz Da?ek,

Quoted 55 lines · Marek Vasut
Quoted 54 lines

Dear ?ukasz Da?ek,

Quoted 45 lines · Marek Vasut
Quoted 44 lines

Dear ?ukasz Da?ek,

Quoted 42 lines · Marek Vasut
Quoted 30 lines

Dear Lukasz Dalek,

Quoted 13 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

board/h2200/h2200.c | 17 +++++++++++++++++
boards.cfg | 1 +
include/configs/h2200.h | 27 +++++++++++++++++++++++++++
3 files changed, 45 insertions(+), 0 deletions(-)

[...]

Quoted 13 lines
boards.cfg +0 -0
index ab10938..a03a469 100644
@@ -283,6 +283,7 @@ pdnb3                        arm         ixp

pdnb3 prodriv scpu arm
ixp

pdnb3 prodrive - pdnb3:SCPU
balloon3

arm pxa

Quoted 7 lines
Quoted 5 lines

h2200 arm pxa

+h2200_usbeth arm pxa h2200

    -

I told you to enable the USB ethernet by default, so why do you add this board?

I don't understand.
We agreed to split h2200 support into two parts. First one adding basic support for device, second one adding support for usb ethernet for h2200.

Quoted 5 lines
Quoted 4 lines

Yes, but I fail to understand why you need TWO board entries for that. Adding the USB ethernet support is just a feature, you don't need additional board entry for that ... so what is the idea behind adding it?

Because easier is to type make h2200_usbeth_config than modifiy config.

Why don't you enable the USB ethernet by default for "h2200" target then?

Quoted 8 lines
Quoted 3 lines
Quoted 2 lines

Best regards,
Marek Vasut

I will enable. This two entries really look weird.

Ok, so we're clear there'll be one entry with ethernet enabled called "h2200", yes?

Best regards,
Marek Vasut

Yes

?ukasz Da?ek

#11 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v6:
- Defined only one entire for board
Changes for v5:
- Surrendered #include <usb.h> with CONFIGs

 board/h2200/h2200.c     |   17 +++++++++++++++++
 boards.cfg              |    2 +-
 include/configs/h2200.h |   27 +++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 1 deletions(-)
board/h2200/h2200.c +17 -0
index 3076306..617bb04 100644
@@ -22,9 +22,20 @@
 #include <asm/arch/pxa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/io.h>
+#ifdef CONFIG_H2200_USBETH
+# include <usb.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* We have RAM, disable cache */
@@ -36,6 +47,12 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
 	return 0;
 }
 
boards.cfg +1 -1
index ab10938..f557c2b 100644
@@ -282,7 +282,7 @@ dvlhost                      arm         ixp
 pdnb3                        arm         ixp         pdnb3               prodrive
 scpu                         arm         ixp         pdnb3               prodrive       -           pdnb3:SCPU
 balloon3                     arm         pxa
-h2200                        arm         pxa
+h2200                        arm         pxa         h2200               -              -           h2200:H2200_USBETH
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
include/configs/h2200.h +27 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
 #endif /* __CONFIG_H */
Signature · 1 line
1.7.8.6
#12 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Dear Lukasz Dalek,

Quoted 20 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v6:
- Defined only one entire for board
Changes for v5:
- Surrendered #include <usb.h> with CONFIGs

 board/h2200/h2200.c     |   17 +++++++++++++++++
 boards.cfg              |    2 +-
 include/configs/h2200.h |   27 +++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 1 deletions(-)
board/h2200/h2200.c +0 -0
index 3076306..617bb04 100644

board/h2200/h2200.c line 25

Quoted 4 lines
board/h2200/h2200.c +1 -0
@@ -22,9 +22,20 @@
 #include <asm/arch/pxa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/io.h>
+#ifdef CONFIG_H2200_USBETH

It's always defined, remove it.

Quoted 38 lines
board/h2200/h2200.c +16 -0
+# include <usb.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* We have RAM, disable cache */
@@ -36,6 +47,12 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
 	return 0;
 }
 
boards.cfg +0 -0
index ab10938..f557c2b 100644
@@ -282,7 +282,7 @@ dvlhost                      arm         ixp
 pdnb3                        arm         ixp         pdnb3              

prodrive scpu arm ixp pdnb3
prodrive - pdnb3:SCPU balloon3
arm pxa

boards.cfg

Quoted 3 lines
boards.cfg +1 -1
-h2200                        arm         pxa
+h2200                        arm         pxa         h2200               -
             -           h2200:H2200_USBETH lubbock                     

[...]

This change isn't needed if you remove CONFIG_H2200_USBETH

include/configs/h2200.h line 156

Quoted 9 lines
include/configs/h2200.h +1 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH

ifdef - endif not needed, otherwise good.

Quoted 27 lines
include/configs/h2200.h +26 -0
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
 #endif /* __CONFIG_H */
#13 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Quoted 103 lines · Marek Vasut

Dear Lukasz Dalek,

Quoted 20 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v6:
- Defined only one entire for board
Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

  board/h2200/h2200.c     |   17 +++++++++++++++++
  boards.cfg              |    2 +-
  include/configs/h2200.h |   27 +++++++++++++++++++++++++++
  3 files changed, 45 insertions(+), 1 deletions(-)
board/h2200/h2200.c +0 -0
index 3076306..617bb04 100644

board/h2200/h2200.c line 25

Quoted 4 lines
board/h2200/h2200.c +1 -0
@@ -22,9 +22,20 @@
  #include<asm/arch/pxa.h>
  #include<asm/arch/pxa-regs.h>
  #include<asm/io.h>
+#ifdef CONFIG_H2200_USBETH

It's always defined, remove it.

Quoted 38 lines
board/h2200/h2200.c +16 -0
+# include<usb.h>
+#endif
 
  DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
  int board_init(void)
  {
  	/* We have RAM, disable cache */
@@ -36,6 +47,12 @@ int board_init(void)
  	/* adress of boot parameters */
  	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
  	return 0;
  }
 
boards.cfg +0 -0
index ab10938..f557c2b 100644
@@ -282,7 +282,7 @@ dvlhost                      arm         ixp
  pdnb3                        arm         ixp         pdnb3

prodrive scpu arm ixp pdnb3
prodrive - pdnb3:SCPU balloon3
arm pxa

boards.cfg

Quoted 3 lines
boards.cfg +1 -1
-h2200                        arm         pxa
+h2200                        arm         pxa         h2200               -
              -           h2200:H2200_USBETH lubbock

[...]

This change isn't needed if you remove CONFIG_H2200_USBETH

include/configs/h2200.h line 156

Quoted 9 lines
include/configs/h2200.h +1 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
  #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH

ifdef - endif not needed, otherwise good.

Quoted 19 lines
include/configs/h2200.h +19 -0
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
Quoted 8 lines

include/configs/h2200.h line 183

Quoted 8 lines
include/configs/h2200.h +7 -0
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
  #endif /* __CONFIG_H */

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

?ukasz Da?ek

#14 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 131 lines · Marek Vasut
Quoted 130 lines

Dear Lukasz Dalek,

Quoted 22 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v6:
- Defined only one entire for board

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

  board/h2200/h2200.c     |   17 +++++++++++++++++
  boards.cfg              |    2 +-
  include/configs/h2200.h |   27 +++++++++++++++++++++++++++
  3 files changed, 45 insertions(+), 1 deletions(-)
board/h2200/h2200.c +0 -0
index 3076306..617bb04 100644

board/h2200/h2200.c line 27

Quoted 6 lines
board/h2200/h2200.c +1 -0
@@ -22,9 +22,20 @@
 
  #include<asm/arch/pxa.h>
  #include<asm/arch/pxa-regs.h>
  #include<asm/io.h>
 
+#ifdef CONFIG_H2200_USBETH

It's always defined, remove it.

Quoted 48 lines
board/h2200/h2200.c +10 -0
+# include<usb.h>
+#endif
 
  DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
 
  int board_init(void)
  {

/* We have RAM, disable cache */

board/h2200/h2200.c +6 -0
@@ -36,6 +47,12 @@ int board_init(void)
 
  	/* adress of boot parameters */
  	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
 
  	return 0;
  
  }
boards.cfg +0 -0
index ab10938..f557c2b 100644
@@ -282,7 +282,7 @@ dvlhost                      arm         ixp
 
  pdnb3                        arm         ixp         pdnb3
 

prodrive scpu arm ixp pdnb3

prodrive - pdnb3:SCPU balloon3

arm pxa

boards.cfg

Quoted 5 lines
boards.cfg +1 -1
-h2200                        arm         pxa
+h2200                        arm         pxa         h2200             
 -
 
              -           h2200:H2200_USBETH lubbock

[...]

This change isn't needed if you remove CONFIG_H2200_USBETH

include/configs/h2200.h line 156

Quoted 9 lines
include/configs/h2200.h +1 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
  #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH

ifdef - endif not needed, otherwise good.

Quoted 27 lines
include/configs/h2200.h +26 -0
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
 
Quoted 4 lines
Quoted 1 line
Quoted 1 line
  #endif /* __CONFIG_H */

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

#15 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Quoted 130 lines · Marek Vasut

Dear ?ukasz Da?ek,

Quoted 128 lines · Marek Vasut
Quoted 127 lines

Dear Lukasz Dalek,

Quoted 22 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---

Changes for v6:
- Defined only one entire for board

Changes for v5:
- Surrendered #include<usb.h> with CONFIGs

   board/h2200/h2200.c     |   17 +++++++++++++++++
   boards.cfg              |    2 +-
   include/configs/h2200.h |   27 +++++++++++++++++++++++++++
   3 files changed, 45 insertions(+), 1 deletions(-)
board/h2200/h2200.c +0 -0
index 3076306..617bb04 100644

board/h2200/h2200.c line 27

Quoted 6 lines
board/h2200/h2200.c +1 -0
@@ -22,9 +22,20 @@
 
   #include<asm/arch/pxa.h>
   #include<asm/arch/pxa-regs.h>
   #include<asm/io.h>
 
+#ifdef CONFIG_H2200_USBETH

It's always defined, remove it.

Quoted 48 lines
board/h2200/h2200.c +10 -0
+# include<usb.h>
+#endif
 
   DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_H2200_USBETH
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+#endif
+
 
   int board_init(void)
   {
   	/* We have RAM, disable cache */
board/h2200/h2200.c +6 -0
@@ -36,6 +47,12 @@ int board_init(void)
 
   	/* adress of boot parameters */
   	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+#if defined(CONFIG_H2200_USBETH)
+	udc_disconnect();
+	mdelay(500);
+#endif
+
 
   	return 0;
   }
boards.cfg +0 -0
index ab10938..f557c2b 100644
@@ -282,7 +282,7 @@ dvlhost                      arm         ixp
 
   pdnb3                        arm         ixp         pdnb3
 

prodrive scpu arm ixp pdnb3

prodrive - pdnb3:SCPU balloon3

arm pxa

boards.cfg

Quoted 5 lines
boards.cfg +1 -1
-h2200                        arm         pxa
+h2200                        arm         pxa         h2200
  -
 
               -           h2200:H2200_USBETH lubbock

[...]

This change isn't needed if you remove CONFIG_H2200_USBETH

include/configs/h2200.h line 156

Quoted 9 lines
include/configs/h2200.h +1 -0
index de5299b..4c5a1ae 100644
@@ -153,4 +153,31 @@
 
   #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#ifdef CONFIG_H2200_USBETH

ifdef - endif not needed, otherwise good.

Quoted 27 lines
include/configs/h2200.h +26 -0
+# define CONFIG_SYS_CONSOLE_IS_IN_ENV
+# define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+# define CONFIG_CMD_NET
+# define CONFIG_CMD_PING
+
+# define CONFIG_BOOTDELAY		2
+# define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+# define CONFIG_USB_GADGET_PXA2XX
+# define CONFIG_USB_ETHER
+# define CONFIG_USB_ETH_SUBSET
+
+# define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+# define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+# define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+#endif
+
 
Quoted 4 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
   #endif /* __CONFIG_H */

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Because of other gadgets, e.g. ttyACM

?ukasz Da?ek

#16 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

[...]

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Because of other gadgets, e.g. ttyACM

Can't these co-exist?

Best regards,
Marek Vasut

#17 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Quoted 11 lines · Marek Vasut

Dear ?ukasz Da?ek,

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Because of other gadgets, e.g. ttyACM

Can't these co-exist?

Best regards,
Marek Vasut

No they can't.

?ukasz Da?ek

#18 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 10 lines · Marek Vasut
Quoted 9 lines

Dear ?ukasz Da?ek,

[...]

Quoted 5 lines
Quoted 4 lines
Quoted 2 lines

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

Because of other gadgets, e.g. ttyACM

Can't these co-exist?

Best regards,
Marek Vasut

No they can't.

Not even with the composite driver ? What's ttyacm and where is it in u-boot btw ?

Best regards,
Marek Vasut

#19 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Quoted 13 lines · Marek Vasut

Dear ?ukasz Da?ek,

Quoted 11 lines · Marek Vasut
Quoted 10 lines

Dear ?ukasz Da?ek,

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Because of other gadgets, e.g. ttyACM

Can't these co-exist?

Quoted 8 lines
Quoted 3 lines
Quoted 2 lines

Best regards,
Marek Vasut

No they can't.

Not even with the composite driver ? What's ttyacm and where is it in u-boot btw ?

Best regards,
Marek Vasut

As far as I know they can't exists on pxa25x. I don't know how about pxa27x.

ttyacm is a serial over usb.

Driver exists in u-boot for pxa27x (gadget/usb/pxa27x_udc.c) but I have my own
for pxa25x not published.

?ukasz Da?ek

#20 lore raw

PATCH v6 1/1 h2200: Add USB CDC ethernet support

Dear ?ukasz Da?ek,

Quoted 28 lines · Marek Vasut
Quoted 19 lines

Dear ?ukasz Da?ek,

Quoted 17 lines · Marek Vasut
Quoted 15 lines

Dear ?ukasz Da?ek,

[...]

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Why do I have to remove CONFIG_H2200_USBETH? If I do so, I'm not be able to disable USB ethernet support.

Why would you disable it?

Because of other gadgets, e.g. ttyACM

Can't these co-exist?

Best regards,
Marek Vasut

Quoted 7 lines
Quoted 1 line

No they can't.

Not even with the composite driver ? What's ttyacm and where is it in u-boot btw ?

Best regards,
Marek Vasut

Quoted 8 lines

As far as I know they can't exists on pxa25x. I don't know how about pxa27x.

ttyacm is a serial over usb.

Driver exists in u-boot for pxa27x (gadget/usb/pxa27x_udc.c) but I have my own
for pxa25x not published.

Your own... what? Check the composite driver, add the ifdefs when you need them, not prematurely.

Best regards,
Marek Vasut

#21 lore raw

PATCH v7 1/1 h2200: Add USB CDC ethernet support

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

---
Changes for v7:
- Removed CONFIG_H2200_USBETH
Changes for v6:
- Defined only one entire for board
Changes for v5:
- Surrendered #include <usb.h> with CONFIGs

 board/h2200/h2200.c     |   11 +++++++++++
 include/configs/h2200.h |   25 +++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 0 deletions(-)
board/h2200/h2200.c +11 -0
index 3076306..720b06e 100644
@@ -22,9 +22,16 @@
 #include <asm/arch/pxa.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/io.h>
+#include <usb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+int board_eth_init(bd_t *bis)
+{
+	usb_eth_initialize(bis);
+	return 0;
+}
+
 int board_init(void)
 {
 	/* We have RAM, disable cache */
@@ -36,6 +43,10 @@ int board_init(void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* Let host see that device is disconnected */
+	udc_disconnect();
+	mdelay(500);
+
 	return 0;
 }
 
include/configs/h2200.h +25 -0
index de5299b..db406e5 100644
@@ -153,4 +153,29 @@
 
 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
 
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_USB_DEV_PULLUP_GPIO	33
+/* USB VBUS GPIO 3 */
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY		2
+#define CONFIG_BOOTCOMMAND		\
+	"setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
+	"if bootp ; then setenv downloaded 1 ; fi ; done ; " \
+	"source :script ; " \
+	"bootm ; "
+
+#define CONFIG_USB_GADGET_PXA2XX
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_SUBSET
+
+#define CONFIG_USBNET_DEV_ADDR		"de:ad:be:ef:00:01"
+#define CONFIG_USBNET_HOST_ADDR	"de:ad:be:ef:00:02"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"stdin=serial\0" \
+	"stdout=serial\0" \
+	"stderr=serial\0"
+
 #endif /* __CONFIG_H */
Signature · 1 line
1.7.8.6
#22 lore raw

PATCH v7 1/1 h2200: Add USB CDC ethernet support

Dear Lukasz Dalek,

Quoted 4 lines

Add support for ethernet over USB which can be used for e.g. booting process. It works with tftp and dhcp clients code.

I'll apply once -pxa is pulled into -next. Thanks
[...]
Best regards,
Marek Vasut