Skip to contentSkip to conversation

ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"

PATCH New Joseph Lo 3 participants 4 messages Oct 8, 2012 – Oct 10, 2012

Subsystems (3)
lore
Share & tools
lore

Joseph Lo

author
#0 lore raw

PATCH 1/1 ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"

For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30).

---
 arch/arm/mach-tegra/Makefile                       |    4 ++--
 .../mach-tegra/{sleep-t20.S => sleep-tegra20.S}    |    0
 .../mach-tegra/{sleep-t30.S => sleep-tegra30.S}    |    0
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/arm/mach-tegra/{sleep-t20.S => sleep-tegra20.S} (100%)
 rename arch/arm/mach-tegra/{sleep-t30.S => sleep-tegra30.S} (100%)
arch/arm/mach-tegra/Makefile +2 -2
index 9aa653b..e6929c6 100644
@@ -13,10 +13,10 @@ obj-$(CONFIG_CPU_IDLE)			+= sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks_data.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= tegra2_emc.o
-obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-t20.o
+obj-$(CONFIG_ARCH_TEGRA_2x_SOC)		+= sleep-tegra20.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= tegra30_clocks_data.o
-obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-t30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC)		+= sleep-tegra30.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
 obj-$(CONFIG_SMP)                       += reset.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
arch/arm/mach-tegra/sleep-tegra20.S renamed from arch/arm/mach-tegra/sleep-t20.S +0 -0
similarity index 100%
rename from arch/arm/mach-tegra/sleep-t20.S
rename to arch/arm/mach-tegra/sleep-tegra20.S
arch/arm/mach-tegra/sleep-tegra30.S renamed from arch/arm/mach-tegra/sleep-t30.S +0 -0
similarity index 100%
rename from arch/arm/mach-tegra/sleep-t30.S
rename to arch/arm/mach-tegra/sleep-tegra30.S
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"

Quoted 4 lines · Joseph Lo

For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30).

Why rename? It's just churn.

-Olof

#2 lore raw

PATCH 1/1 ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"

Quoted 7 lines · Olof Johansson
Quoted 4 lines · Joseph Lo

For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30).

Why rename? It's just churn.

The CPUs are named TegraNN not TNN, so for consistency the files should be named that way. This is almost the last instance; everything else got renamed as a side-effect of adding splitting things up for Tegra30 support. Oh, except tegra2_emc.c which can be renamed whenever it's moved to an appropriate drivers/ directory.

#3 lore raw

PATCH 1/1 ARM: tegra: rename the file of "sleep-tXX" to "sleep-tegraXX"

Quoted 7 lines · Stephen Warren
Quoted 6 lines · Olof Johansson
Quoted 4 lines · Joseph Lo

For the naming consistency under the mach-tegra, we re-name the file of "sleep-tXX" to "sleep-tegraXX" (e.g., sleep-t30 to sleep-tegra30).

Quoted 7 lines
Quoted 1 line

Why rename? It's just churn.

The CPUs are named TegraNN not TNN, so for consistency the files should be named that way. This is almost the last instance; everything else got renamed as a side-effect of adding splitting things up for Tegra30 support. Oh, except tegra2_emc.c which can be renamed whenever it's moved to an appropriate drivers/ directory.

Marketing names are irrelevant and tend to change over time. But ok, if it's the last renames pending then I think we can be OK with it.

-Olof