ASoC: add support for the Freescale / iVeia P1022 RDK reference board
PATCH v2 1/1 ASoC: add support for the Freescale / iVeia P1022 RDK reference board
This small reference boards has a Freescale P1022 dual-core PowerPC SOC and a Wolfson Microelectronics WM8960 codec.
--- sound/soc/fsl/Kconfig | 14 ++ sound/soc/fsl/Makefile | 4 + sound/soc/fsl/p1022_rdk.c | 392 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 410 insertions(+), 0 deletions(-) create mode 100644 sound/soc/fsl/p1022_rdk.c
sound/soc/fsl/Kconfig +14 -0
@@ -46,6 +46,20 @@ config SND_SOC_P1022_DS This will also include the Wolfson Microelectronics WM8776 codec driver. +config SND_SOC_P1022_RDK + tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board" + # I2C is necessary for the WM8960 driver + depends on P1022_RDK && I2C + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + select SND_SOC_POWERPC_DMA + select SND_SOC_WM8960 + default y if P1022_RDK + help + Say Y if you want to enable audio on the Freescale / iVeia + P1022 RDK board. This will also include the Wolfson + Microelectronics WM8960 codec driver. + config SND_SOC_MPC5200_I2S tristate "Freescale MPC5200 PSC in I2S mode driver" depends on PPC_MPC52xx && PPC_BESTCOMM
sound/soc/fsl/Makefile +4 -0
@@ -6,6 +6,10 @@ obj-$(CONFIG_SND_SOC_MPC8610_HPCD) += snd-soc-mpc8610-hpcd.o snd-soc-p1022-ds-objs := p1022_ds.o obj-$(CONFIG_SND_SOC_P1022_DS) += snd-soc-p1022-ds.o +# P1022 RDK Machine Support +snd-soc-p1022-rdk-objs := p1022_rdk.o +obj-$(CONFIG_SND_SOC_P1022_RDK) += snd-soc-p1022-rdk.o + # Freescale PowerPC SSI/DMA Platform Support snd-soc-fsl-ssi-objs := fsl_ssi.o snd-soc-fsl-utils-objs := fsl_utils.o
sound/soc/fsl/p1022_rdk.c new file +392 -0
392 lines not on this page · raw message
Signature · 1 line
1.7.3.4
Mark Brown
AppliedQuoted 2 lines · Timur Tabi
This small reference boards has a Freescale P1022 dual-core PowerPC SOC and a Wolfson Microelectronics WM8960 codec.
Applied, thanks. It would be nice to move over to more modern bindings for new boards though.
Quoted 2 lines · Mark Brown
Applied, thanks. It would be nice to move over to more modern bindings for new boards though.
I understand, but the P1022RDK is very similar to the P1022DS. I really didn't want to put that much effort into supporting it, since it's not sold by Freescale.
I'll use the new binding for the next audio-enabled board we make.
Signature · 2 lines
Timur Tabi Linux kernel developer at Freescale