Skip to contentSkip to conversation

which toolchain version for Microblaze

U-Boot Stephan Linz 2 participants 2 messages Oct 12, 2012 – Nov 2, 2012

lore
Share & tools
lore
#0 lore raw

Hi Michal,
Hi David

which version of binutils and gcc you are currently using for embedded Linux development? Just now I've played a little bit with the new one I've found in the Xilinx git repository on:

git://git.xilinx.com/microblaze-gnu.git

Unfortunately both the binaries and the sources seems to be buggy. When I try to compile U-Boot with it the final linker stage runs into a SIGSEGV -- here is the (reduced) output:

UNDEF_SYM=`microblaze-unknown-linux-gnu-objdump -x
board/xilinx/microblaze-generic/libmicroblaze-generic.o api/libapi.o
arch/microblaze/cpu/libmicroblaze.o arch/microblaze/lib/libmicroblaze.o
**/*.o | sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;
cd /store/devel/MICROBLAZE/u-boot-mbref &&
microblaze-unknown-linux-gnu-ld.bfd -T u-boot.lds -Bstatic -Ttext
0x29000000 $UNDEF_SYM arch/microblaze/cpu/start.o --start-group
api/libapi.o arch/microblaze/cpu/libmicroblaze.o
arch/microblaze/lib/libmicroblaze.o **/*.o
board/xilinx/microblaze-generic/libmicroblaze-generic.o --end-group
-L /opt/tools-4.6.2-mb-xilinx-v3.0/microblaze-unknown-linux-gnu/bin/../lib/gcc/microblaze-unknown-linux-gnu/4.6.2 -lgcc -Map u-boot.map -o u-boot

/opt/tools-4.6.2-mb-xilinx-v3.0/microblaze-unknown-linux-gnu/bin/../lib/gcc/microblaze-unknown-linux-gnu/4.6.2/libgcc.a(_muldi3.o): In function `__muldi3':
/home/buildbot/plgx_bld/xils005/2012_06_30/toolchains/lin32-microblaze-xilinx-linux-gnu/crosstool-ng/targets/src/gcc-4.6.2/libgcc/../gcc/libgcc2.c:549: undefined reference to `_GLOBAL_OFFSET_TABLE_' /bin/sh: line 1: 17792 Segmentation fault

@David: This error can be reproduced with the binaries in Xilinx git repo. Have you any idea?

@Michal: which version did you use currently?

@all: Is there anybody who can give me a hint how I can / should handle this error?

br,
Stephan

#1 lore raw

Hi Stephan,

2012/10/12 Stephan Linz <[email protected]>:

Quoted 26 lines

Hi Michal,
Hi David

which version of binutils and gcc you are currently using for embedded Linux development? Just now I've played a little bit with the new one I've found in the Xilinx git repository on:

git://git.xilinx.com/microblaze-gnu.git

Unfortunately both the binaries and the sources seems to be buggy. When I try to compile U-Boot with it the final linker stage runs into a SIGSEGV -- here is the (reduced) output:

UNDEF_SYM=`microblaze-unknown-linux-gnu-objdump -x
board/xilinx/microblaze-generic/libmicroblaze-generic.o api/libapi.o
arch/microblaze/cpu/libmicroblaze.o arch/microblaze/lib/libmicroblaze.o
**/*.o | sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;
cd /store/devel/MICROBLAZE/u-boot-mbref &&
microblaze-unknown-linux-gnu-ld.bfd -T u-boot.lds -Bstatic -Ttext
0x29000000 $UNDEF_SYM arch/microblaze/cpu/start.o --start-group
api/libapi.o arch/microblaze/cpu/libmicroblaze.o
arch/microblaze/lib/libmicroblaze.o **/*.o
board/xilinx/microblaze-generic/libmicroblaze-generic.o --end-group
-L /opt/tools-4.6.2-mb-xilinx-v3.0/microblaze-unknown-linux-gnu/bin/../lib/gcc/microblaze-unknown-linux-gnu/4.6.2 -lgcc -Map u-boot.map -o u-boot

Quoted 4 lines

/opt/tools-4.6.2-mb-xilinx-v3.0/microblaze-unknown-linux-gnu/bin/../lib/gcc/microblaze-unknown-linux-gnu/4.6.2/libgcc.a(_muldi3.o): In function `__muldi3':
/home/buildbot/plgx_bld/xils005/2012_06_30/toolchains/lin32-microblaze-xilinx-linux-gnu/crosstool-ng/targets/src/gcc-4.6.2/libgcc/../gcc/libgcc2.c:549: undefined reference to `_GLOBAL_OFFSET_TABLE_' /bin/sh: line 1: 17792 Segmentation fault

This is bug in the toolchain if you hw has this setup BS=1, MUL=0, DIV=0 and maybe others combination with MUL=0 setup.

We are working on fixing it.

Thanks,
Michal

Signature · 4 lines
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian