regulator: vexpress: Add missing n_voltages setting

---
Hi Pawel,
I don't have a chance to compile test this patch because I could not find VEXPRESS_CONFIG in current tree.
Can you help testing this patch?

Thanks,
Axel

 drivers/regulator/vexpress.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

index 1702945..94a8cb9 100644
@@ -86,10 +86,14 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
 	}
 
 	init_data->constraints.apply_uV = 0;
-	if (init_data->constraints.min_uV && init_data->constraints.max_uV)
+	if (init_data->constraints.min_uV && init_data->constraints.max_uV) {
 		reg->desc.ops = &vexpress_regulator_ops;
-	else
+		reg->desc.n_voltages = init_data->constraints.max_uV -
+				       init_data->constraints.min_uV + 1;
+	} else {
 		reg->desc.ops = &vexpress_regulator_ops_ro;
+		reg->desc.n_voltages = 1;
+	}
 
 	config.dev = &pdev->dev;
 	config.init_data = init_data;

1.7.9.5

I'll be more than happy to help, but can you please tell me what use case you have in mind? The "reg->desc.continuous_voltage_range = true;" together with this patch:

http://git.kernel.org/?p=linux/kernel/git/broonie/regulator.git;a=commitdiff;h=bd7a2b600ace90c8819495b639a744c8f5c68feb

were supposed to make the n_voltages unnecessary, as this regulator is (in theory at least) capable of setting any voltage in the constraints range, so there are not real operating points.

Cheers!

Paweł