it913x [BUG] Enable endpoint 3 on devices with HID interface.
PATCH 1/1 it913x [BUG] Enable endpoint 3 on devices with HID interface.
On some USB controllers when endpoint 3 (used by HID) is not enabled this causes a USB reset.
Signed-off-by Malcolm Priestley <[email protected]>
--- drivers/media/usb/dvb-usb-v2/it913x.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/media/usb/dvb-usb-v2/it913x.c +8 -2
@@ -659,13 +659,19 @@ static int it913x_frontend_attach(struct dvb_usb_adapter *adap)it913x_wr_reg (d,DEV_0_DMOD ,MP2IF2_SW_RST ,0x1 );it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x0f );it913x_wr_reg (d,DEV_0 ,EP0_TX_NAK ,0x1b ); -it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x2f ); +if (st->proprietary_ir == false)/* Enable endpoint 3 */ +it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x3f ); +else +it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x2f );it913x_wr_reg (d,DEV_0 ,EP4_TX_LEN_LSB , ep_size &0xff );it913x_wr_reg (d,DEV_0 ,EP4_TX_LEN_MSB , ep_size >>8 ); ret =it913x_wr_reg (d,DEV_0 ,EP4_MAX_PKT , pkt_size); }else if (adap->id ==1 && adap->fe[0 ]) { -it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x6f ); +if (st->proprietary_ir == false) +it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x7f ); +else +it913x_wr_reg (d,DEV_0 ,EP0_TX_EN ,0x6f );it913x_wr_reg (d,DEV_0 ,EP5_TX_LEN_LSB , ep_size &0xff );it913x_wr_reg (d,DEV_0 ,EP5_TX_LEN_MSB , ep_size >>8 );
Signature · 1 line
1.7.10.4