Skip to contentSkip to conversation

staging: line6: checkpatch.pl cleanups

PATCH In review Stefan Hajnoczi 4 participants 15 messages Nov 11, 2012 – Nov 16, 2012 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: line6: checkpatch.pl cleanups

This series addresses a number of checkpatch.pl warnings, mostly exceeding the 80 character line limit.

Some checkpatch.pl warnings remain in the line6 driver but they are either more difficult to resolve or I intend to drop that code entirely. So expect a little more time before the driver passes checkpatch.pl completely.

Stefan Hajnoczi (8):
staging: line6: wrap >80 char lines in capture.c
staging: line6: fix quoted string across lines in midibuf.c
staging: line6: shorten comment below 80 chars in pcm.c
staging: line6: drop trailing whitespace in pcm.h
staging: line6: wrap lines to 80 chars in playback.c
staging: line6: replace deprecated strict_strtol() in toneport.c
staging: line6: wrap lines to 80 chars in usbdefs.h
staging: line6: wrap comment to 80 chars in variax.c

 drivers/staging/line6/capture.c  | 13 ++++++++-----
 drivers/staging/line6/midibuf.c  |  6 +++---
 drivers/staging/line6/pcm.c      |  4 ++--
 drivers/staging/line6/pcm.h      |  2 +-
 drivers/staging/line6/playback.c | 17 +++++++++++------
 drivers/staging/line6/toneport.c |  8 ++------
 drivers/staging/line6/usbdefs.h  | 10 +++++++---
 drivers/staging/line6/variax.c   |  4 +++-
 8 files changed, 37 insertions(+), 27 deletions(-)
Signature · 1 line
1.7.12.1
#1 lore raw

PATCH 1/8 staging: line6: wrap >80 char lines in capture.c

---
 drivers/staging/line6/capture.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/staging/line6/capture.c +8 -5
index c85c5b6..389c41f 100644
@@ -256,8 +256,8 @@ static void audio_in_callback(struct urb *urb)
 #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
 		if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
 #endif
-			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm->flags)
-			    && (fsize > 0))
+			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,
+				     &line6pcm->flags) && (fsize > 0))
 				line6_capture_copy(line6pcm, fbuf, fsize);
 	}
 
@@ -274,7 +274,8 @@ static void audio_in_callback(struct urb *urb)
 #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
 		if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
 #endif
-			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm->flags))
+			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,
+				     &line6pcm->flags))
 				line6_capture_check_period(line6pcm, length);
 	}
 }
@@ -356,7 +357,8 @@ int snd_line6_capture_trigger(struct snd_line6_pcm *line6pcm, int cmd)
 #ifdef CONFIG_PM
 	case SNDRV_PCM_TRIGGER_RESUME:
 #endif
-		err = line6_pcm_acquire(line6pcm, LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
+		err = line6_pcm_acquire(line6pcm,
+					LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
 
 		if (err < 0)
 			return err;
@@ -367,7 +369,8 @@ int snd_line6_capture_trigger(struct snd_line6_pcm *line6pcm, int cmd)
 #ifdef CONFIG_PM
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 #endif
-		err = line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
+		err = line6_pcm_release(line6pcm,
+					LINE6_BIT_PCM_ALSA_CAPTURE_STREAM);
 
 		if (err < 0)
 			return err;
Signature · 1 line
1.7.12.1
#2 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

Quoted 10 lines · Stefan Hajnoczi
---
 drivers/staging/line6/capture.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
drivers/staging/line6/capture.c +0 -0
index c85c5b6..389c41f 100644

drivers/staging/line6/capture.c static void audio_in_callback(struct urb *urb) · line 259

Quoted 6 lines
drivers/staging/line6/capture.c +1 -2
@@ -256,8 +256,8 @@ static void audio_in_callback(struct urb *urb)
 #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
 		if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
 #endif
-			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm->flags)
-			    && (fsize > 0))
+			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

regards,
dan carpenter

#3 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

Am Mittwoch, 14. November 2012, 17:33:05 schrieb Dan Carpenter:

Quoted 21 lines · Stefan Hajnoczi
Quoted 11 lines

---

 drivers/staging/line6/capture.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
(quoted diff) +0 -0

b/drivers/staging/line6/capture.c index c85c5b6..389c41f 100644

drivers/staging/line6/capture.c static void audio_in_callback(struct urb *urb) · line 263

Quoted 8 lines
drivers/staging/line6/capture.c +0 -1
@@ -256,8 +256,8 @@ static void audio_in_callback(struct urb *urb)
 
 #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
 
 		if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
 
 #endif
 
-			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm-

flags)

Quoted 7 lines

drivers/staging/line6/capture.c static void audio_in_callback(struct urb *urb) · line 259

Quoted 2 lines
drivers/staging/line6/capture.c +1 -1
-			    && (fsize > 0))
+			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

Please refer to the file pcm.h for a detailed documentation of this and similar names (in fact, the documentation explains the LINE6_BIT_PCM_* names instead, but I bevlieve the correspondence is obvious). It's hard to define a shorter name which is at the same time descriptive, consistent, and not to be confused with related names.

Should such documentation be moved to a separate file (e.g., "Documentation/sound/alsa/line6usb.txt")?

Kind regards,
Markus

#4 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

Quoted 29 lines · Markus Grabner

Am Mittwoch, 14. November 2012, 17:33:05 schrieb Dan Carpenter:

Quoted 21 lines · Stefan Hajnoczi
Quoted 11 lines

---

 drivers/staging/line6/capture.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)
(quoted diff) +0 -0

b/drivers/staging/line6/capture.c index c85c5b6..389c41f 100644

drivers/staging/line6/capture.c static void audio_in_callback(struct urb *urb) · line 263

Quoted 8 lines
drivers/staging/line6/capture.c +0 -1
@@ -256,8 +256,8 @@ static void audio_in_callback(struct urb *urb)
 
 #ifdef CONFIG_LINE6_USB_IMPULSE_RESPONSE
 
 		if (!(line6pcm->flags & LINE6_BITS_PCM_IMPULSE))
 
 #endif
 
-			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM, &line6pcm-

flags)

Quoted 7 lines

drivers/staging/line6/capture.c static void audio_in_callback(struct urb *urb) · line 259

Quoted 2 lines
drivers/staging/line6/capture.c +1 -1
-			    && (fsize > 0))
+			if (test_bit(LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM,

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

Quoted 8 lines

Please refer to the file pcm.h for a detailed documentation of this and similar names (in fact, the documentation explains the LINE6_BIT_PCM_* names instead, but I bevlieve the correspondence is obvious). It's hard to define a shorter name which is at the same time descriptive, consistent, and not to be confused with related names.

Should such documentation be moved to a separate file (e.g., "Documentation/sound/alsa/line6usb.txt")?

The documentation is pretty good actually and it belongs where it is. But 35 characters is just tooooooooooooooooooooooooooooooooooo long.

To me the word "INDEX_" is confusing because what are we indexing? In this context it means the the variable is a bit flag. That was obvious because we were calling test_bit().

I think we could drop the PCM_ as well, because why do we need that?

We could change the LINE6 to L6.

if (test_bit(L6_ALSA_CAPTURE_STREAM, &line6pcm - flags)

It fits!

regards,
dan carpenter

#5 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

In reply to Markus Grabner
Quoted 5 lines · Markus Grabner

Am Mittwoch, 14. November 2012, 17:33:05 schrieb Dan Carpenter:

Quoted 4 lines

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

Quoted 8 lines

Please refer to the file pcm.h for a detailed documentation of this and similar names (in fact, the documentation explains the LINE6_BIT_PCM_* names instead, but I bevlieve the correspondence is obvious). It's hard to define a shorter name which is at the same time descriptive, consistent, and not to be confused with related names.

Should such documentation be moved to a separate file (e.g., "Documentation/sound/alsa/line6usb.txt")?

Documenting poor naming choices doesn't make it better.

#6 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

Quoted 13 lines · On Thursday 15 November 2012 14:12:31 Joe Perches wrote:
Quoted 12 lines · Markus Grabner

Am Mittwoch, 14. November 2012, 17:33:05 schrieb Dan Carpenter:

Quoted 4 lines

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

Please refer to the file pcm.h for a detailed documentation of this and similar names (in fact, the documentation explains the LINE6_BIT_PCM_* names instead, but I bevlieve the correspondence is obvious). It's hard to define a shorter name which is at the same time descriptive, consistent, and not to be confused with related names.

Quoted 4 lines
Quoted 2 lines

Should such documentation be moved to a separate file (e.g., "Documentation/sound/alsa/line6usb.txt")?

Documenting poor naming choices doesn't make it better.

Yes, but the documentation might help understanding why a particular naming was chosen and that it might not be as poor as it seemed at first sight. I assume that you are aware of the meaning of the LINE6_INDEX_PCM_* symbols (and of the issues that were fixed by introducing them), so which naming scheme would you propose instead?

Kind regards,
Markus

#7 lore raw

Re: [PATCH 1/8] staging: line6: wrap >80 char lines in capture.c

Quoted 14 lines · Markus Grabner
Quoted 13 lines · On Thursday 15 November 2012 14:12:31 Joe Perches wrote:
Quoted 12 lines · Markus Grabner

Am Mittwoch, 14. November 2012, 17:33:05 schrieb Dan Carpenter:

Quoted 4 lines

The reason this is hitting the 80 character limit is because "LINE6_INDEX_PCM_ALSA_CAPTURE_STREAM" is 35 characters long. It isn't even clear from the name what it holds. It's just a very crap name.

Please refer to the file pcm.h for a detailed documentation of this and similar names (in fact, the documentation explains the LINE6_BIT_PCM_* names instead, but I bevlieve the correspondence is obvious). It's hard to define a shorter name which is at the same time descriptive, consistent, and not to be confused with related names.

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

Should such documentation be moved to a separate file (e.g., "Documentation/sound/alsa/line6usb.txt")?

Documenting poor naming choices doesn't make it better.

Yes, but the documentation might help understanding why a particular naming was chosen and that it might not be as poor as it seemed at first sight. I assume that you are aware of the meaning of the LINE6_INDEX_PCM_* symbols (and of the issues that were fixed by introducing them), so which naming scheme

Hi Markus

Dunno why they were introduced, but I think
several things could be shorter as to me
none of these longish L6_BIT(foo) elements
means much and I'd need to read the code
to figure them out anyway.

the LINE6_ prefix is excessive,
L6_ would probably be fine.
(and that goes for all the functions too)

CAPTURE/RECORD could be RD/WR
MONITOR could be MON
IMPULSE could be IRM

BUFFER could be I
STREAM could be O
(or the other way 'round)

etc..., cheers, Joe

#8 lore raw

PATCH 2/8 staging: line6: fix quoted string across lines in midibuf.c

In reply to Stefan Hajnoczi

Checkpatch warns when quoted strings are split across lines. The rationale is that quoted strings should be left on a single line so that grep works. (The 80 character line limit does not apply to quoted strings.)

---
 drivers/staging/line6/midibuf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/staging/line6/midibuf.c +3 -3
index 836e8c8..968e0de 100644
@@ -64,9 +64,9 @@ int line6_midibuf_init(struct MidiBuffer *this, int size, int split)
 
 void line6_midibuf_status(struct MidiBuffer *this)
 {
-	pr_debug("midibuf size=%d split=%d pos_read=%d pos_write=%d "
-	       "full=%d command_prev=%02x\n", this->size, this->split,
-	       this->pos_read, this->pos_write, this->full, this->command_prev);
+	pr_debug("midibuf size=%d split=%d pos_read=%d pos_write=%d full=%d command_prev=%02x\n",
+		 this->size, this->split, this->pos_read, this->pos_write,
+		 this->full, this->command_prev);
 }
 
 int line6_midibuf_bytes_free(struct MidiBuffer *this)
Signature · 1 line
1.7.12.1
#9 lore raw

PATCH 3/8 staging: line6: shorten comment below 80 chars in pcm.c

In reply to Stefan Hajnoczi
---
 drivers/staging/line6/pcm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/staging/line6/pcm.c +2 -2
index 7fe44a6..6c1e313 100644
@@ -109,7 +109,7 @@ int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int channels)
 	line6pcm->prev_fbuf = NULL;
 
 	if (test_flags(flags_old, flags_new, LINE6_BITS_CAPTURE_BUFFER)) {
-		/* We may be invoked multiple times in a row so allocate once only */
+		/* Invoked multiple times in a row so allocate once only */
 		if (!line6pcm->buffer_in) {
 			line6pcm->buffer_in =
 				kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
@@ -148,7 +148,7 @@ int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int channels)
 	}
 
 	if (test_flags(flags_old, flags_new, LINE6_BITS_PLAYBACK_BUFFER)) {
-		/* We may be invoked multiple times in a row so allocate once only */
+		/* Invoked multiple times in a row so allocate once only */
 		if (!line6pcm->buffer_out) {
 			line6pcm->buffer_out =
 				kmalloc(LINE6_ISO_BUFFERS * LINE6_ISO_PACKETS *
Signature · 1 line
1.7.12.1
#10 lore raw

PATCH 4/8 staging: line6: drop trailing whitespace in pcm.h

In reply to Stefan Hajnoczi
---
 drivers/staging/line6/pcm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/line6/pcm.h +1 -1
index 5210ec8..6aa0d46 100644
@@ -167,7 +167,7 @@ enum {
 #endif
 	    LINE6_BIT_PCM_ALSA_CAPTURE_STREAM |
 	    LINE6_BIT_PCM_MONITOR_CAPTURE_STREAM,
-	
+
 	LINE6_BITS_STREAM =
 	    LINE6_BITS_PLAYBACK_STREAM |
 	    LINE6_BITS_CAPTURE_STREAM
Signature · 1 line
1.7.12.1
#11 lore raw

PATCH 5/8 staging: line6: wrap lines to 80 chars in playback.c

In reply to Stefan Hajnoczi

There are a few instances of 80+ character lines in playback.c. Two instances are just because of a useless comment "this is somewhat paranoid", so drop the comment. Other instances are straightforward line wrapping.

---
 drivers/staging/line6/playback.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/staging/line6/playback.c +11 -6
index a0ab9d0..4cf23af 100644
@@ -185,7 +185,7 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 	if (urb_size == 0) {
 		/* can't determine URB size */
 		spin_unlock_irqrestore(&line6pcm->lock_audio_out, flags);
-		dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");	/* this is somewhat paranoid */
+		dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");
 		return -EINVAL;
 	}
 
@@ -218,7 +218,8 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 				       len * bytes_per_frame, runtime->dma_area,
 				       (urb_frames - len) * bytes_per_frame);
 			} else
-				dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n", len);	/* this is somewhat paranoid */
+				dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n",
+					len);
 		} else {
 			memcpy(urb_out->transfer_buffer,
 			       runtime->dma_area +
@@ -319,7 +320,8 @@ void line6_unlink_audio_out_urbs(struct snd_line6_pcm *line6pcm)
 }
 
 /*
-	Wait until unlinking of all currently active playback URBs has been finished.
+	Wait until unlinking of all currently active playback URBs has been
+	finished.
 */
 void line6_wait_clear_audio_out_urbs(struct snd_line6_pcm *line6pcm)
 {
@@ -413,7 +415,8 @@ static void audio_out_callback(struct urb *urb)
 	if (!shutdown) {
 		submit_audio_out_urb(line6pcm);
 
-		if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM, &line6pcm->flags)) {
+		if (test_bit(LINE6_INDEX_PCM_ALSA_PLAYBACK_STREAM,
+			     &line6pcm->flags)) {
 			line6pcm->bytes_out += length;
 			if (line6pcm->bytes_out >= line6pcm->period_out) {
 				line6pcm->bytes_out %= line6pcm->period_out;
@@ -499,7 +502,8 @@ int snd_line6_playback_trigger(struct snd_line6_pcm *line6pcm, int cmd)
 #ifdef CONFIG_PM
 	case SNDRV_PCM_TRIGGER_RESUME:
 #endif
-		err = line6_pcm_acquire(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
+		err = line6_pcm_acquire(line6pcm,
+					LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
 
 		if (err < 0)
 			return err;
@@ -510,7 +514,8 @@ int snd_line6_playback_trigger(struct snd_line6_pcm *line6pcm, int cmd)
 #ifdef CONFIG_PM
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 #endif
-		err = line6_pcm_release(line6pcm, LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
+		err = line6_pcm_release(line6pcm,
+					LINE6_BIT_PCM_ALSA_PLAYBACK_STREAM);
 
 		if (err < 0)
 			return err;
Signature · 1 line
1.7.12.1
#12 lore raw

PATCH 6/8 staging: line6: replace deprecated strict_strtol() in toneport.c

In reply to Stefan Hajnoczi

The LED value is an int, so replace strict_strtol() with kstrtoint(). It's safe to pass in the actual variable instead of a local temporary because strto*() doesn't write to the result unless the function returns success.

---
 drivers/staging/line6/toneport.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/staging/line6/toneport.c +2 -6
index 31b624b..a529dd3 100644
@@ -127,13 +127,11 @@ static ssize_t toneport_set_led_red(struct device *dev,
 				    const char *buf, size_t count)
 {
 	int retval;
-	long value;
 
-	retval = strict_strtol(buf, 10, &value);
+	retval = kstrtoint(buf, 10, &led_red);
 	if (retval)
 		return retval;
 
-	led_red = value;
 	toneport_update_led(dev);
 	return count;
 }
@@ -143,13 +141,11 @@ static ssize_t toneport_set_led_green(struct device *dev,
 				      const char *buf, size_t count)
 {
 	int retval;
-	long value;
 
-	retval = strict_strtol(buf, 10, &value);
+	retval = kstrtoint(buf, 10, &led_green);
 	if (retval)
 		return retval;
 
-	led_green = value;
 	toneport_update_led(dev);
 	return count;
 }
Signature · 1 line
1.7.12.1
#13 lore raw

PATCH 7/8 staging: line6: wrap lines to 80 chars in usbdefs.h

In reply to Stefan Hajnoczi
---
 drivers/staging/line6/usbdefs.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/staging/line6/usbdefs.h +7 -3
index 353d59d..43eb540 100644
@@ -83,11 +83,15 @@ enum {
 	LINE6_BIT(VARIAX),
 
 	LINE6_BITS_PRO = LINE6_BIT_BASSPODXTPRO | LINE6_BIT_PODXTPRO,
-	LINE6_BITS_LIVE = LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_PODXTLIVE | LINE6_BIT_PODX3LIVE,
-	LINE6_BITS_PODXTALL = LINE6_BIT_PODXT | LINE6_BIT_PODXTLIVE | LINE6_BIT_PODXTPRO,
+	LINE6_BITS_LIVE = LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_PODXTLIVE |
+			  LINE6_BIT_PODX3LIVE,
+	LINE6_BITS_PODXTALL = LINE6_BIT_PODXT | LINE6_BIT_PODXTLIVE |
+			      LINE6_BIT_PODXTPRO,
 	LINE6_BITS_PODX3ALL = LINE6_BIT_PODX3 | LINE6_BIT_PODX3LIVE,
 	LINE6_BITS_PODHDALL = LINE6_BIT_PODHD300 | LINE6_BIT_PODHD500,
-	LINE6_BITS_BASSPODXTALL	= LINE6_BIT_BASSPODXT |	LINE6_BIT_BASSPODXTLIVE | LINE6_BIT_BASSPODXTPRO
+	LINE6_BITS_BASSPODXTALL	= LINE6_BIT_BASSPODXT |
+				  LINE6_BIT_BASSPODXTLIVE |
+				  LINE6_BIT_BASSPODXTPRO
 };
 
 /* device supports settings parameter via USB */
Signature · 1 line
1.7.12.1
#14 lore raw

PATCH 8/8 staging: line6: wrap comment to 80 chars in variax.c

In reply to Stefan Hajnoczi
---
 drivers/staging/line6/variax.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/staging/line6/variax.c +3 -1
index f97416b..1b85ecc 100644
@@ -160,7 +160,9 @@ static void variax_startup5(unsigned long data)
 	/* current model dump: */
 	line6_dump_request_async(&variax->dumpreq, &variax->line6, 0,
 				 VARIAX_DUMP_PASS1);
-	/* passes 2 and 3 are performed implicitly before entering variax_startup6 */
+	/* passes 2 and 3 are performed implicitly before entering
+	 * variax_startup6.
+	 */
 }
 
 static void variax_startup6(struct usb_line6_variax *variax)
Signature · 1 line
1.7.12.1