sata_highbank: utilize common ata_platform_remove_one()
PATCH v3 1/4 sata_highbank: utilize common ata_platform_remove_one()
---
v2: fix whitespace
v3: Resend to fix a trivial conflict
(Note: This patch is on its 3rd version, where others are v2.)
drivers/ata/sata_highbank.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
drivers/ata/sata_highbank.c +1 -11
@@ -368,16 +368,6 @@ err0:return rc; } -static int __devexit ahci_highbank_remove(struct platform_device *pdev) -{ -struct device *dev = &pdev->dev; -struct ata_host *host =dev_get_drvdata (dev); - -ata_host_detach (host); - -return 0 ; -} -#ifdef CONFIG_PM_SLEEP static int ahci_highbank_suspend (struct device *dev) {
@@ -432,7 +422,7 @@ SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops, ahci_highbank_suspend, ahci_highbank_resume);static struct platform_driver ahci_highbank_driver = { - .remove =__devexit_p (ahci_highbank_remove), + .remove = ata_platform_remove_one, .driver = { .name ="highbank-ahci" , .owner =THIS_MODULE ,
Signature · 1 line
1.8.0
PATCH v2 2/4 pata_octeon_cf: perform host detach, removal on exit
This driver does not detach and remove its ata_host properly on device removal. Add the common .remove helper.
Note: I do not know this driver well enough to ensure this is the right thing to do. Merge this patch with caution.
---
v2: no change (rebased along with previous patch)
drivers/ata/pata_octeon_cf.c | 1 + 1 file changed, 1 insertion(+)
drivers/ata/pata_octeon_cf.c +1 -0
@@ -921,6 +921,7 @@ free_cf_port:static struct platform_driver octeon_cf_driver = { .probe = octeon_cf_probe, + .remove = ata_platform_remove_one, .driver = { .name =DRV_NAME , .owner =THIS_MODULE ,
Signature · 1 line
1.8.0
Re: [PATCH v2 2/4] pata_octeon_cf: perform host detach, removal on exit
Quoted 20 lines · Brian Norris
This driver does not detach and remove its
ata_hostproperly on device removal. Add the common .remove helper.Note: I do not know this driver well enough to ensure this is the right thing to do. Merge this patch with caution.
Signed-off-by Brian Norris <[email protected]>Acked-by Tejun Heo <[email protected]>Cc David Daney <[email protected]>---
v2: no change (rebased along with previous patch)drivers/ata/pata_octeon_cf.c | 1 + 1 file changed, 1 insertion(+)drivers/ata/pata_octeon_cf.c +0
-0
drivers/ata/pata_octeon_cf.c free_cf_port: · line 924
Quoted 4 lines
drivers/ata/pata_octeon_cf.c +1
-0@@ -921,6 +921,7 @@ free_cf_port:static struct platform_driver octeon_cf_driver = { .probe = octeon_cf_probe, + .remove = ata_platform_remove_one,
Can you point me at the definition of ata_platform_remove_one()?
I can seem to find it. Without knowing what that does, I would be inclined to NACK the whole thing.
How did you test the patch?
This patch is likely to be incomplete as the driver is also missing the module_exit() things.
It might be simpler to just make the driver "bool" instead of "tristate" in the Kconfig.
Quoted 4 lines
drivers/ata/pata_octeon_cf.c +0
-0.driver = { .name = DRV_NAME, .owner = THIS_MODULE,
Re: [PATCH v2 2/4] pata_octeon_cf: perform host detach, removal on exit
Jeff,
Per David's comments, I recommend that this patch be dropped from inclusion.
Hi David,
Quoted 22 lines · David Daney
Quoted 21 lines · Brian Norris
This driver does not detach and remove its
ata_hostproperly on device removal. Add the common .remove helper.Note: I do not know this driver well enough to ensure this is the right thing to do. Merge this patch with caution.
Signed-off-by Brian Norris <[email protected]>Acked-by Tejun Heo <[email protected]>Cc David Daney <[email protected]>---
v2: no change (rebased along with previous patch)drivers/ata/pata_octeon_cf.c | 1 + 1 file changed, 1 insertion(+)drivers/ata/pata_octeon_cf.c +0
-0@@ -921,6 +921,7 @@ free_cf_port:
Quoted 6 lines
drivers/ata/pata_octeon_cf.c free_cf_port: · line 924
Quoted 3 lines
drivers/ata/pata_octeon_cf.c +1
-0static struct platform_driver octeon_cf_driver = { .probe = octeon_cf_probe, + .remove = ata_platform_remove_one,Can you point me at the definition of
ata_platform_remove_one()?
It's a recent addition, and this series (v2/v3) is just part of the already-accepted series. Jeff already queued it all up in libata-dev.git:
https://git.kernel.org/?p=linux/kernel/git/jgarzik/libata-dev.git;a=shortlog;h=refs/heads/ALL
Quoted 2 lines
I can seem to find it. Without knowing what that does, I would be inclined to NACK the whole thing.
A NACK is probably the right thing. I was mostly converting a few other drivers which used some simple, common patterns to use my new common code, but this driver was missing it altogether. It looks like there may be bigger issues, though, as you point out.
Quoted 1 line
How did you test the patch?
I didn't; I don't have a cavium-octeon system.
Quoted 5 lines
This patch is likely to be incomplete as the driver is also missing the
module_exit()things.It might be simpler to just make the driver "bool" instead of "tristate" in the
Kconfig.
As noted earlier, I don't have much interest in this driver. I agree that there are some other issues with the driver; I think it leaks memory if it is ever allowed to unload, for one. Feel free to submit an alternative patch to prevent this driver from being built as a module.
Brian
Re: [PATCH v2 2/4] pata_octeon_cf: perform host detach, removal on exit
Quoted 13 lines · Brian Norris
Quoted 2 lines
Quoted 2 lines
I can seem to find it. Without knowing what that does, I would be inclined to NACK the whole thing.
A NACK is probably the right thing. I was mostly converting a few other drivers which used some simple, common patterns to use my new common code, but this driver was missing it altogether. It looks like there may be bigger issues, though, as you point out.
Quoted 1 line
Quoted 1 line
How did you test the patch?
I didn't; I don't have a cavium-octeon system.
Quoted 3 lines
Quoted 3 lines
This patch is likely to be incomplete as the driver is also missing the
module_exit()things.
Quoted 7 lines
Quoted 2 lines
Quoted 2 lines
It might be simpler to just make the driver "bool" instead of "tristate" in the
Kconfig.As noted earlier, I don't have much interest in this driver. I agree that there are some other issues with the driver; I think it leaks memory if it is ever allowed to unload, for one. Feel free to submit an alternative patch to prevent this driver from being built as a module.
reverted
PATCH v2 3/4 libata: use pci_get_drvdata() helper
In reply to Brian Norris---
v2: no change (rebased along with previous patches)
drivers/ata/libata-core.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/ata/libata-core.c +3 -4
@@ -6287,8 +6287,7 @@ void ata_host_detach(struct ata_host *host)*/ void ata_pci_remove_one (struct pci_dev *pdev) { -struct device *dev = &pdev->dev; -struct ata_host *host =dev_get_drvdata (dev); +struct ata_host *host =pci_get_drvdata (pdev);ata_host_detach (host); }
@@ -6357,7 +6356,7 @@ int ata_pci_device_do_resume(struct pci_dev *pdev)int ata_pci_device_suspend (struct pci_dev *pdev,pm_message_t mesg) { -struct ata_host *host =dev_get_drvdata (&pdev->dev); +struct ata_host *host =pci_get_drvdata (pdev);int rc =0 ; rc =ata_host_suspend (host, mesg);
@@ -6371,7 +6370,7 @@ int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)int ata_pci_device_resume (struct pci_dev *pdev) { -struct ata_host *host =dev_get_drvdata (&pdev->dev); +struct ata_host *host =pci_get_drvdata (pdev);int rc; rc =ata_pci_device_do_resume (pdev);
Signature · 1 line
1.8.0
PATCH v2 4/4 pata_of_platform: fix compile error
In reply to Brian NorrisI failed to include <linux/libata.h>, causing this error:
drivers/ata/pata_of_platform.c:93: error: 'ata_platform_remove_one' undeclared here (not in a function)
--- drivers/ata/pata_of_platform.c | 1 + 1 file changed, 1 insertion(+)
drivers/ata/pata_of_platform.c +1 -0
@@ -14,6 +14,7 @@#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> +#include <linux/libata.h> static int __devinit pata_of_platform_probe (struct platform_device *ofdev) {
Signature · 1 line
1.8.0
Quoted 10 lines · Brian Norris
Signed-off-by Brian Norris <[email protected]>Acked-by Tejun Heo <[email protected]>---
v2: fix whitespace
v3: Resend to fix a trivial conflict(Note: This patch is on its 3rd version, where others are v2.)
drivers/ata/sata_highbank.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
applied 1-4