Skip to contentSkip to conversation

regulator: core: Allow specify activate_[reg|bit] for regmap based voltage_sel operations

PATCH In review Axel Lin 2 participants 5 messages Dec 13, 2012

Subsystems (2)
Voltage and current regulator framework Dialog semiconductor drivers
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/4 regulator: core: Allow specify activate_[reg|bit] for regmap based voltage_sel operations

Some DVM regulators needs to update activate_bit after setting vsel_reg to initiate voltage change on the output. This patch adds activate_reg and activate_bit to struct regulator_desc and update regulator_set_voltage_sel_regmap() to set activate_bit of activate_reg when activate_bit is set.

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/core.c         |   12 +++++++++++-
 include/linux/regulator/driver.h |    6 ++++++
 2 files changed, 17 insertions(+), 1 deletion(-)
drivers/regulator/core.c +11 -1
index 0f65b24..2021086 100644
@@ -2074,10 +2074,20 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
  */
 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
 {
+	int ret;
+
 	sel <<= ffs(rdev->desc->vsel_mask) - 1;
 
-	return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
 				  rdev->desc->vsel_mask, sel);
+	if (ret)
+		return ret;
+
+	if (rdev->desc->activate_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->activate_reg,
+					 rdev->desc->activate_bit,
+					 rdev->desc->activate_bit);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
include/linux/regulator/driver.h +6 -0
index d10bb0f..ba5a535 100644
@@ -193,6 +193,10 @@ enum regulator_type {
  *
  * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
  * @vsel_mask: Mask for register bitfield used for selector
+ * @activate_reg: Register for initiate voltage change on the output when
+ *                using regulator_set_voltage_sel_regmap
+ * @activate_bit: Register bitfield used for initiate voltage change on the
+ *                output when using regulator_set_voltage_sel_regmap
  * @enable_reg: Register for control when using regmap enable/disable ops
  * @enable_mask: Mask for control when using regmap enable/disable ops
  *

@@ -218,6 +222,8 @@ struct regulator_desc {
 
 	unsigned int vsel_reg;
 	unsigned int vsel_mask;
+	unsigned int activate_reg;
+	unsigned int activate_bit;
 	unsigned int enable_reg;
 	unsigned int enable_mask;
 	unsigned int bypass_reg;
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH 2/4 regulator: 88pm8607: Use activate_[reg|bit] with regmap based voltage_sel operations

Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/88pm8607.c |   43 ++++++++++++------------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)
drivers/regulator/88pm8607.c +12 -31
index 2b55711..21a7334 100644
@@ -30,8 +30,6 @@ struct pm8607_regulator_info {
 	unsigned int	*vol_table;
 	unsigned int	*vol_suspend;
 
-	int	update_reg;
-	int	update_bit;
 	int	slope_double;
 };
 

@@ -222,29 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	uint8_t val;
-	int ret;
-
-	val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
-
-	ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
-			      rdev->desc->vsel_mask, val);
-	if (ret)
-		return ret;
-	switch (info->desc.id) {
-	case PM8607_ID_BUCK1:
-	case PM8607_ID_BUCK3:
-		ret = pm860x_set_bits(info->i2c, info->update_reg,
-				      1 << info->update_bit,
-				      1 << info->update_bit);
-		break;
-	}
-	return ret;
-}
-
 static int pm8606_preg_enable(struct regulator_dev *rdev)
 {
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);

@@ -276,7 +251,7 @@ static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
 
 static struct regulator_ops pm8607_regulator_ops = {
 	.list_voltage	= pm8607_list_voltage,
-	.set_voltage_sel = pm8607_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,

@@ -313,11 +288,11 @@ static struct regulator_ops pm8606_preg_ops = {
 		.n_voltages = ARRAY_SIZE(vreg##_table),			\
 		.vsel_reg = PM8607_##vreg,				\
 		.vsel_mask = ARRAY_SIZE(vreg##_table) - 1,		\
+		.activate_reg = PM8607_##ureg,				\
+		.activate_bit = (ubit),					\
 		.enable_reg = PM8607_##ereg,				\
 		.enable_mask = 1 << (ebit),				\
 	},								\
-	.update_reg	= PM8607_##ureg,				\
-	.update_bit	= (ubit),					\
 	.slope_double	= (0),						\
 	.vol_table	= (unsigned int *)&vreg##_table,		\
 	.vol_suspend	= (unsigned int *)&vreg##_suspend_table,	\

@@ -343,9 +318,15 @@ static struct regulator_ops pm8606_preg_ops = {
 }
 
 static struct pm8607_regulator_info pm8607_regulator_info[] = {
-	PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
-	PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
-	PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
+	PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0),
+	/*
+	 * BUCK2 is designed to control voltage of CP domain.
+	 * Linux only runs in AP side, so we don't need to control BUCK2 in AP
+	 * side. Thus set the activate bit to be 0 instead of BIT(1) to avoid
+	 * updating activate_bit for BUCK2
+	 */
+	PM8607_DVC(BUCK2, GO, 0, SUPPLIES_EN11, 1),
+	PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2),
 
 	PM8607_LDO(1,         LDO1, 0, SUPPLIES_EN11, 3),
 	PM8607_LDO(2,         LDO2, 0, SUPPLIES_EN11, 4),
Signature · 1 line
1.7.9.5
author
#2 lore raw

PATCH 3/4 regulator: da9052: Use activate_[reg|bit] with regmap based voltage_sel operations

In reply to Axel Lin
Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/da9052-regulator.c |   41 +++++-----------------------------
 1 file changed, 6 insertions(+), 35 deletions(-)
drivers/regulator/da9052-regulator.c +6 -35
index d096309..47455ad 100644
@@ -70,7 +70,6 @@ struct da9052_regulator_info {
 	int step_uV;
 	int min_uV;
 	int max_uV;
-	unsigned char activate_bit;
 };
 
 struct da9052_regulator {

@@ -210,36 +209,6 @@ static int da9052_map_voltage(struct regulator_dev *rdev,
 	return sel;
 }
 
-static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev,
-					    unsigned int selector)
-{
-	struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
-	struct da9052_regulator_info *info = regulator->info;
-	int id = rdev_get_id(rdev);
-	int ret;
-
-	ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
-				rdev->desc->vsel_mask, selector);
-	if (ret < 0)
-		return ret;
-
-	/* Some LDOs and DCDCs are DVC controlled which requires enabling of
-	 * the activate bit to implment the changes on the output.
-	 */
-	switch (id) {
-	case DA9052_ID_BUCK1:
-	case DA9052_ID_BUCK2:
-	case DA9052_ID_BUCK3:
-	case DA9052_ID_LDO2:
-	case DA9052_ID_LDO3:
-		ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG,
-					info->activate_bit, info->activate_bit);
-		break;
-	}
-
-	return ret;
-}
-
 static struct regulator_ops da9052_dcdc_ops = {
 	.get_current_limit = da9052_dcdc_get_current_limit,
 	.set_current_limit = da9052_dcdc_set_current_limit,

@@ -247,7 +216,7 @@ static struct regulator_ops da9052_dcdc_ops = {
 	.list_voltage = da9052_list_voltage,
 	.map_voltage = da9052_map_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_sel = da9052_regulator_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,

@@ -257,7 +226,7 @@ static struct regulator_ops da9052_ldo_ops = {
 	.list_voltage = da9052_list_voltage,
 	.map_voltage = da9052_map_voltage,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_sel = da9052_regulator_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,

@@ -274,13 +243,14 @@ static struct regulator_ops da9052_ldo_ops = {
 		.owner = THIS_MODULE,\
 		.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
 		.vsel_mask = (1 << (sbits)) - 1,\
+		.activate_reg = DA9052_SUPPLY_REG, \
+		.activate_bit = (abits), \
 		.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
 		.enable_mask = 1 << (ebits),\
 	},\
 	.min_uV = (min) * 1000,\
 	.max_uV = (max) * 1000,\
 	.step_uV = (step) * 1000,\
-	.activate_bit = (abits),\
 }
 
 #define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \

@@ -294,13 +264,14 @@ static struct regulator_ops da9052_ldo_ops = {
 		.owner = THIS_MODULE,\
 		.vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
 		.vsel_mask = (1 << (sbits)) - 1,\
+		.activate_reg = DA9052_SUPPLY_REG, \
+		.activate_bit = (abits), \
 		.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
 		.enable_mask = 1 << (ebits),\
 	},\
 	.min_uV = (min) * 1000,\
 	.max_uV = (max) * 1000,\
 	.step_uV = (step) * 1000,\
-	.activate_bit = (abits),\
 }
 
 static struct da9052_regulator_info da9052_regulator_info[] = {
Signature · 1 line
1.7.9.5
#3 lore raw
In reply to Axel Lin
Quoted 5 lines · Axel Lin

Some DVM regulators needs to update activate_bit after setting vsel_reg to initiate voltage change on the output. This patch adds activate_reg and activate_bit to struct regulator_desc and update regulator_set_voltage_sel_regmap() to set activate_bit of activate_reg when activate_bit is set.

I'm not convinced about the naming here... how about apply rather than activate? Not sure if it shouldn't be specific to voltage setting either.

author
#4 lore raw

PATCH 4/4 regulator: tps6586x: Use activate_[reg|bit] with regmap based voltage_sel operations

In reply to Axel Lin
Signed-off-by Axel Lin <[email protected]>
---
 drivers/regulator/tps6586x-regulator.c |   54 ++++++--------------------------
 1 file changed, 10 insertions(+), 44 deletions(-)
drivers/regulator/tps6586x-regulator.c +10 -44
index f86da67..1b5e8b9 100644
@@ -61,10 +61,6 @@ struct tps6586x_regulator {
 
 	int enable_bit[2];
 	int enable_reg[2];
-
-	/* for DVM regulators */
-	int go_reg;
-	int go_bit;
 };
 
 static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)

@@ -72,37 +68,10 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
 	return rdev_get_dev(rdev)->parent;
 }
 
-static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
-				    unsigned selector)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-	int ret, val, rid = rdev_get_id(rdev);
-	uint8_t mask;
-
-	val = selector << (ffs(rdev->desc->vsel_mask) - 1);
-	mask = rdev->desc->vsel_mask;
-
-	ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
-	if (ret)
-		return ret;
-
-	/* Update go bit for DVM regulators */
-	switch (rid) {
-	case TPS6586X_ID_LDO_2:
-	case TPS6586X_ID_LDO_4:
-	case TPS6586X_ID_SM_0:
-	case TPS6586X_ID_SM_1:
-		ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
-		break;
-	}
-	return ret;
-}
-
 static struct regulator_ops tps6586x_regulator_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_sel = tps6586x_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,

@@ -142,7 +111,7 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 };
 
 #define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
 	.desc	= {							\
 		.supply_name = _pin_name,				\
 		.name	= "REG-" #_id,					\

@@ -156,29 +125,26 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 		.enable_mask = 1 << (ebit0),				\
 		.vsel_reg = TPS6586X_##vreg,				\
 		.vsel_mask = ((1 << (nbits)) - 1) << (shift),		\
+		.activate_reg = (goreg),				\
+		.activate_bit = (gobit),				\
 	},								\
 	.enable_reg[0]	= TPS6586X_SUPPLY##ereg0,			\
 	.enable_bit[0]	= (ebit0),					\
 	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
 	.enable_bit[1]	= (ebit1),
 
-#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
-	.go_reg = TPS6586X_##goreg,					\
-	.go_bit = (gobit),
-
 #define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits,		\
 		     ereg0, ebit0, ereg1, ebit1)			\
 {									\
 	TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
+			   ereg0, ebit0, ereg1, ebit1, 0, 0)		\
 }
 
 #define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits,		\
 		     ereg0, ebit0, ereg1, ebit1, goreg, gobit)		\
 {									\
 	TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
-	TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
 }
 
 #define TPS6586X_SYS_REGULATOR()					\

@@ -207,13 +173,13 @@ static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
 
 	TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
-					ENB, 3, VCC2, 6),
+					ENB, 3, TPS6586X_VCC2, BIT(6)),
 	TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
-					END, 3, VCC1, 6),
+					END, 3, TPS6586X_VCC1, BIT(6)),
 	TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
-					ENB, 1, VCC1, 2),
+					ENB, 1, TPS6586X_VCC1, BIT(2)),
 	TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
-					ENB, 0, VCC1, 0),
+					ENB, 0, TPS6586X_VCC1, BIT(0)),
 };
 
 /*
Signature · 1 line
1.7.9.5