Skip to contentSkip to conversation

ASoC: wm8985: Refactor set_pll code to avoid gcc warnings

PATCH Applied Fabio Estevam 2 participants 4 messages Dec 24, 2012 – Dec 27, 2012

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ASoC: wm8985: Refactor set_pll code to avoid gcc warnings

From: Fabio Estevam <[email protected]>

Refactor set_pll code to avoid the following warnings:

sound/soc/codecs/wm8985.c:852:50: warning: 'pll_div.k' may be used uninitialized in this function sound/soc/codecs/wm8985.c:849:9: warning: 'pll_div.n' may be used uninitialized in this function sound/soc/codecs/wm8985.c:848:23: warning: 'pll_div.div2' may be used uninitialized in this function

Do the same as in commit 86ce6c9a (ASoC: WM8804: Refactor set_pll code to avoid GCC warnings).

---
 sound/soc/codecs/wm8985.c |   43 ++++++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 23 deletions(-)
sound/soc/codecs/wm8985.c +20 -23
index ab37826..dd6ce3b 100644
@@ -830,33 +830,30 @@ static int wm8985_set_pll(struct snd_soc_dai *dai, int pll_id,
 	struct pll_div pll_div;
 
 	codec = dai->codec;
-	if (freq_in && freq_out) {
+	if (!freq_in || !freq_out) {
+		/* disable the PLL */
+		snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1,
+				    WM8985_PLLEN_MASK, 0);
+	} else {
 		ret = pll_factors(&pll_div, freq_out * 4 * 2, freq_in);
 		if (ret)
 			return ret;
-	}
 
-	/* disable the PLL before reprogramming it */
-	snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1,
-			    WM8985_PLLEN_MASK, 0);
-	
-	if (!freq_in || !freq_out)
-		return 0;
-
-	/* set PLLN and PRESCALE */
-	snd_soc_write(codec, WM8985_PLL_N,
-		      (pll_div.div2 << WM8985_PLL_PRESCALE_SHIFT)
-		      | pll_div.n);
-	/* set PLLK */
-	snd_soc_write(codec, WM8985_PLL_K_3, pll_div.k & 0x1ff);
-	snd_soc_write(codec, WM8985_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
-	snd_soc_write(codec, WM8985_PLL_K_1, (pll_div.k >> 18));
-	/* set the source of the clock to be the PLL */
-	snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL,
-			    WM8985_CLKSEL_MASK, WM8985_CLKSEL);
-	/* enable the PLL */
-	snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1,
-			    WM8985_PLLEN_MASK, WM8985_PLLEN);
+		/* set PLLN and PRESCALE */
+		snd_soc_write(codec, WM8985_PLL_N,
+			      (pll_div.div2 << WM8985_PLL_PRESCALE_SHIFT)
+			      | pll_div.n);
+		/* set PLLK */
+		snd_soc_write(codec, WM8985_PLL_K_3, pll_div.k & 0x1ff);
+		snd_soc_write(codec, WM8985_PLL_K_2, (pll_div.k >> 9) & 0x1ff);
+		snd_soc_write(codec, WM8985_PLL_K_1, (pll_div.k >> 18));
+		/* set the source of the clock to be the PLL */
+		snd_soc_update_bits(codec, WM8985_CLOCK_GEN_CONTROL,
+				    WM8985_CLKSEL_MASK, WM8985_CLKSEL);
+		/* enable the PLL */
+		snd_soc_update_bits(codec, WM8985_POWER_MANAGEMENT_1,
+				    WM8985_PLLEN_MASK, WM8985_PLLEN);
+	}
 	return 0;
 }
 
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 2/2 ASoC: Fix 'may be used uninitialized' warnings

From: Fabio Estevam <[email protected]>

Fix the following build warnings:

sound/soc/codecs/wm_hubs.c: In function 'hp_event':
sound/soc/codecs/wm_hubs.c:321:11: warning: 'reg_r' may be used uninitialized in this function [-Wuninitialized] sound/soc/codecs/wm_hubs.c:251:13: note: 'reg_r' was declared here sound/soc/codecs/wm_hubs.c:322:11: warning: 'reg_l' may be used uninitialized in this function [-Wuninitialized] sound/soc/codecs/wm_hubs.c:251:6: note: 'reg_l' was declared here

---
 sound/soc/codecs/wm_hubs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/wm_hubs.c +1 -1
index 867ae97..a2ea687 100644
@@ -248,7 +248,7 @@ static void enable_dc_servo(struct snd_soc_codec *codec)
 	struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
 	struct wm_hubs_dcs_cache *cache;
 	s8 offset;
-	u16 reg_l, reg_r, dcs_cfg, dcs_reg;
+	u16 reg_l = 0, reg_r = 0, dcs_cfg, dcs_reg;
 
 	switch (hubs->dcs_readback_mode) {
 	case 2:
Signature · 1 line
1.7.9.5
#2 lore raw

Re: [PATCH 2/2] ASoC: Fix 'may be used uninitialized' warnings

sound/soc/codecs/wm_hubs.c static void enable_dc_servo(struct snd_soc_codec *codec) · line 251

Quoted 2 lines · Fabio Estevam
sound/soc/codecs/wm_hubs.c +1 -1
-	u16 reg_l, reg_r, dcs_cfg, dcs_reg;
+	u16 reg_l = 0, reg_r = 0, dcs_cfg, dcs_reg;

No, this is a terrible idea. Apart from the coding style thing all you're doing here is just ensuring that a value is set in the variable without any analysis saying that this is a sensible value to set or that the compiler hasn't spotted a genuine issue.

There's also the possibility that the compiler is just buggy...

Applied
#3 lore raw
In reply to Fabio Estevam
Quoted 3 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Refactor set_pll code to avoid the following warnings:

Applied, thanks. Though if you could report the flow analysis bug against GCC that'd probably be more useful...