iio:light:tsl2563 move out of staging

PATCH New Jonathan Cameron 1 participant 1 message Jan 6, 2013

Subsystems (3)

Staging IIO Staging - industrial io

lore

Share & tools

lore

Jonathan Cameron

author maintainer

2013-01-06 15:43 UTC #0 lore raw

PATCH v2 1/1 iio:light:tsl2563 move out of staging

This driver is simple, uses the latest interfaces and contains few if any controversial elements. All of its interfaces have been in place for a long time now. Hence let's move it out of staging.

Signed-off-by Jonathan Cameron <[email protected]>

---
Changes since v1

Now actually has the tsl2563.h header.
Sorry about that.

 drivers/iio/light/Kconfig             |  10 +
 drivers/iio/light/Makefile            |   1 +
 drivers/iio/light/tsl2563.c           | 899 ++++++++++++++++++++++++++++++++++
 drivers/staging/iio/light/Kconfig     |  10 -
 drivers/staging/iio/light/Makefile    |   1 -
 drivers/staging/iio/light/tsl2563.c   | 899 ----------------------------------
 drivers/staging/iio/light/tsl2563.h   |   9 -
 include/linux/platform_data/tsl2563.h |   9 +
 8 files changed, 919 insertions(+), 919 deletions(-)

drivers/iio/light/Kconfig +10 -0

index 1763c9b..2dd472a 100644
@@ -32,6 +32,16 @@ config SENSORS_LM3533
 	  changes. The ALS-control output values can be set per zone for the
 	  three current output channels.
 
+config SENSORS_TSL2563
+	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
+	depends on I2C
+	help
+	 If you say yes here you get support for the Taos TSL2560,
+	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tsl2563.
+
 config VCNL4000
 	tristate "VCNL4000 combined ALS and proximity sensor"
 	depends on I2C

drivers/iio/light/Makefile +1 -0

index 21a8f0d..040d9c7 100644
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
+obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o

drivers/iio/light/tsl2563.c new file +899 -0

899 lines not on this page · raw message

drivers/staging/iio/light/Kconfig +0 ~~-10~~

index 4bed30e..ca8d6e6 100644
@@ -25,16 +25,6 @@ config SENSORS_ISL29028
 	 Proximity value via iio. The ISL29028 provides the concurrent sensing
 	 of ambient light and proximity.
 
-config SENSORS_TSL2563
-	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
-	depends on I2C
-	help
-	 If you say yes here you get support for the Taos TSL2560,
-	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
-
-	 This driver can also be built as a module.  If so, the module
-	 will be called tsl2563.
-
 config TSL2583
 	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
 	depends on I2C

drivers/staging/iio/light/Makefile +0 -1

index 141af1e..9960fdf 100644
@@ -2,7 +2,6 @@
 # Makefile for industrial I/O Light sensors
 #
 
-obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o

drivers/staging/iio/light/tsl2563.c deleted +0 ~~-899~~

899 lines not on this page · raw message

drivers/staging/iio/light/tsl2563.h deleted +0 -9

deleted file mode 100644
index b97368b..0000000
@@ -1,9 +0,0 @@
-#ifndef __LINUX_TSL2563_H
-#define __LINUX_TSL2563_H
-
-struct tsl2563_platform_data {
-	int cover_comp_gain;
-};
-
-#endif /* __LINUX_TSL2563_H */
-

include/linux/platform_data/tsl2563.h new file +9 -0

new file mode 100644
index 0000000..b97368b
@@ -0,0 +1,9 @@
+#ifndef __LINUX_TSL2563_H
+#define __LINUX_TSL2563_H
+
+struct tsl2563_platform_data {
+	int cover_comp_gain;
+};
+
+#endif /* __LINUX_TSL2563_H */
+

Signature · 1 line

1.8.1