Skip to contentSkip to conversation

Fix incorrect device ID for the Commtech 422/2-PCIe.

PATCH In review Matt Schulte 2 participants 5 messages Jan 7, 2013 – Jan 14, 2013 TTY layer and serial drivers

lore
Share & tools
lore

Matt Schulte

author
#0 lore raw

PATCH 1/2 Fix incorrect device ID for the Commtech 422/2-PCIe.

Signed-off-by Matt Schulte <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/tty/serial/8250/8250_pci.c +1 -1
index 26b9dc0..18f1d79 100644
@@ -1301,9 +1301,9 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
 #define PCI_VENDOR_ID_ASIX		0x9710
-#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
 #define PCI_DEVICE_ID_COMMTECH_4224PCIE	0x0020
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
 
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
Signature · 1 line
1.7.2.5
author
#1 lore raw

PATCH 2/2 Fix incorrect num_ports on pbn_b0_8_1152000_200 boards structure.

Signed-off-by Matt Schulte <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/tty/serial/8250/8250_pci.c +1 -1
index 18f1d79..c8ec5fc 100644
@@ -2246,7 +2246,7 @@ static struct pciserial_board pci_boards[] = {
 
 	[pbn_b0_8_1152000_200] = {
 		.flags		= FL_BASE0,
-		.num_ports	= 2,
+		.num_ports	= 8,
 		.base_baud	= 1152000,
 		.uart_offset	= 0x200,
 	},
Signature · 1 line
1.7.2.5
author
#2 lore raw
In reply to Matt Schulte

Is there anything I need to do to get these commits accepted?

Thanks
Matt Schulte
Commtech, Inc.
Voice: 316-636-1131
Fax: 316-636-1163
http://www.commtech-fastcom.com

Quoted 24 lines · Matt Schulte
Signed-off-by Matt Schulte <[email protected]>
---
 drivers/tty/serial/8250/8250_pci.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/tty/serial/8250/8250_pci.c +1 -2
index 26b9dc0..18f1d79 100644
@@ -1301,9 +1301,9 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_AGESTAR          0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375     0x6872
 #define PCI_VENDOR_ID_ASIX             0x9710
-#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
 #define PCI_DEVICE_ID_COMMTECH_4224PCIE        0x0020
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE        0x0021
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
 
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
--

1.7.2.5

maintainer
#3 lore raw
Quoted 1 line · Matt Schulte

Is there anything I need to do to get these commits accepted?

I should be able to get through all of the serial and tty patches by the end of the week, depending on other issues that might pop up. Thanks for your patience, they aren't lost, I'm just behind due to the holiday.

thanks,

greg k-h

author
#4 lore raw

No worries, thanks for letting me know.

Matt

Quoted 4 lines · Greg KH

I should be able to get through all of the serial and tty patches by the end of the week, depending on other issues that might pop up. Thanks for your patience, they aren't lost, I'm just behind due to the holiday.

Matt Schulte
Commtech, Inc.
Voice: 316-636-1131
Fax: 316-636-1163
http://www.commtech-fastcom.com