Recipes for Xilinx ZC706 (Zynq 7045) and Avnet Zedboard
Hello,
after successfully using the recipe for the ZC702 development board I would like to know if anybody is working on recipes for the Xilinx ZC706 (Zynq 7045) and Avnet Zedboard.
Thank you very much in advance!
With best regards,
Andreas Schweigstill
--
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems Schauenburgerstraße 116, D-24118 Kiel, Germany
Phone: (+49) 431 530354-35, Fax: (+49) 431 530354-36
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/
Quoted 5 lines · Andreas Schweigstill
Hello,
after successfully using the recipe for the ZC702 development board I would like to know if anybody is working on recipes for the Xilinx ZC706 (Zynq 7045) and Avnet Zedboard.
Trying ....
I am looking at the best way to do this. My goal is to get one kernel in meta-zynq that is pretty good across the public boards and do the board selection via the device tree.
In the meantime, you can build a rootfs for the zc702 and use a kernel built outside OE. Do you know if there is support for the zc706 in the code on the public Xilnx git repo.
Philip
Quoted 17 lines
Thank you very much in advance!
With best regards,
Andreas Schweigstill--
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems Schauenburgerstraße 116, D-24118 Kiel, Germany
Phone: (+49) 431 530354-35, Fax: (+49) 431 530354-36
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Dear Philip,
I just checked the Xilinx Linux kernel and found out that all configuration items for Zynq development boards have been removed, so we can already use a unified kernel for ZC702/706/770 and Zedboard. DTS files for all flavours are located in arch/arm/boot/dts.
We just received the first ZC706 board a few days ago.
With best regards,
Andreas Schweigstill
Am Do, 01/10/2013 14:43, hat Philip Balister <[email protected]> geschrieben:
Quoted 37 lines · Andreas Schweigstill
Quoted 5 lines
Hello,
after successfully using the recipe for the ZC702 development board I would like to know if anybody is working on recipes for the Xilinx ZC706 (Zynq 7045) and Avnet Zedboard.
Trying ....
I am looking at the best way to do this. My goal is to get one kernel in meta-zynq that is pretty good across the public boards and do the board selection via the device tree.
In the meantime, you can build a rootfs for the zc702 and use a kernel built outside OE. Do you know if there is support for the zc706 in the code on the public Xilnx git repo.
Philip
Quoted 16 lines
Thank you very much in advance!
With best regards,
Andreas Schweigstill--
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems Schauenburgerstraße 116, D-24118 Kiel, Germany
Phone: (+49) 431 530354-35, Fax: (+49) 431 530354-36
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto