Skip to contentSkip to conversation

ARM: imx: Remove mach-mx51_3ds board

PATCH New Fabio Estevam 2 participants 2 messages Jan 18, 2013 – Jan 21, 2013

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/1 ARM: imx: Remove mach-mx51_3ds board

From: Fabio Estevam <[email protected]>

mach-mx51_3ds only supports old silicon version of MX51 and was replaced with mx51 babbage, which is the official MX51 development board.

No need to maintain it anymore.

Signed-off-by Fabio Estevam <[email protected]>
---
 arch/arm/configs/imx_v6_v7_defconfig |    1 -
 arch/arm/mach-imx/Kconfig            |   13 ---
 arch/arm/mach-imx/Makefile           |    1 -
 arch/arm/mach-imx/mach-mx51_3ds.c    |  174 ----------------------------------
 4 files changed, 189 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-mx51_3ds.c
arch/arm/configs/imx_v6_v7_defconfig +0 -1
index 6966713..6dddbf8 100644
@@ -32,7 +32,6 @@ CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
arch/arm/mach-imx/Kconfig +0 -13
index 0a2349d..1c2fa8b 100644
@@ -777,19 +777,6 @@ config MACH_MX51_BABBAGE
 	  u-boot. This includes specific configurations for the board and its
 	  peripherals.
 
-config MACH_MX51_3DS
-	bool "Support MX51PDK (3DS)"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	select SOC_IMX51
-	help
-	  Include support for MX51PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
arch/arm/mach-imx/Makefile +0 -1
index 0634b31..9742007 100644
@@ -103,7 +103,6 @@ endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
 obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
arch/arm/mach-imx/mach-mx51_3ds.c deleted +0 -174

174 lines not on this page · raw message

Signature · 1 line
1.7.9.5
Applied
#1 lore raw

PATCH 1/1 ARM: imx: Remove mach-mx51_3ds board

Quoted 8 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

mach-mx51_3ds only supports old silicon version of MX51 and was replaced with mx51 babbage, which is the official MX51 development board.

No need to maintain it anymore.

Signed-off-by Fabio Estevam <[email protected]>

Applied, thanks.