Skip to contentSkip to conversation

i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST

PATCH New Eric Nelson 2 participants 2 messages Feb 1, 2013 – Feb 12, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST

In order to use the more thorough memory test, the macro CONFIG_SYS_MEMTEST_SCRATCH must be defined with a usable address.

---
 include/configs/mx6qsabre_common.h |    1 +
 include/configs/mx6qsabrelite.h    |    1 +
 2 files changed, 2 insertions(+)
include/configs/mx6qsabre_common.h +1 -0
index d76357c..f7e8779 100644
@@ -171,6 +171,7 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 #define CONFIG_SYS_HZ                  1000
include/configs/mx6qsabrelite.h +1 -0
index 5ac93ad..a08e7f7 100644
@@ -252,6 +252,7 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END	       0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR
 #define CONFIG_SYS_HZ		       1000
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST

Quoted 6 lines · Eric Nelson

In order to use the more thorough memory test, the macro CONFIG_SYS_MEMTEST_SCRATCH must be defined with a usable address.

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================