cpuset: add missing 'cpuset.' prefix some flags
PATCH 1/1 cpuset: add missing 'cpuset.' prefix some flags
See fix 4160df82b3 for Documentation/cgroups/cpusets.txt in kernel
--- man7/cpuset.7 | 98 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 49 insertions(+), 49 deletions(-)
man7/cpuset.7 +49 -49
@@ -192,7 +192,7 @@ and all child cpuset directories have been removed. See the \fBNotify On Release\fR section, below. .\" ====================== cpus ====================== .TP -.I cpus +.I cpuset.cpus List of the physical numbers of the CPUs on which processes in that cpuset are allowed to execute. See \fBList Format\fR below for a description of the
@@ -205,7 +205,7 @@ writing a new list to its file. .\" ==================== cpu_exclusive ==================== .TP -.I cpu_exclusive +.I cpuset.cpu_exclusive Flag (0 or 1). If set (1), the cpuset has exclusive use of its CPUs (no sibling or cousin cpuset may overlap CPUs).
@@ -234,7 +234,7 @@ of any cpuset are always a subset of the of its parent cpuset. .\" ====================== mems ====================== .TP -.I mems +.I cpuset.mems List of memory nodes on which processes in this cpuset are allowed to allocate memory. See \fBList Format\fR below for a description of the
@@ -242,7 +242,7 @@ format of .IR mems . .\" ==================== mem_exclusive ==================== .TP -.I mem_exclusive +.I cpuset.mem_exclusive Flag (0 or 1). If set (1), the cpuset has exclusive use of its memory nodes (no sibling or cousin may overlap).
@@ -258,7 +258,7 @@ nodes of any cpuset are always a subset of the memory nodes of that cpuset's parent cpuset. .\" ==================== mem_hardwall ==================== .TP -.IR mem_hardwall " (since Linux 2.6.26)" +.IR cpuset.mem_hardwall " (since Linux 2.6.26)" Flag (0 or 1). If set (1), the cpuset is a \fBHardwall\fR cpuset (see below.) Unlike \fBmem_exclusive\fR,
@@ -269,14 +269,14 @@ By default this is off (0). Newly created cpusets also initially default this to off (0). .\" ==================== memory_migrate ==================== .TP -.IR memory_migrate " (since Linux 2.6.16)" +.IR cpuset.memory_migrate " (since Linux 2.6.16)" Flag (0 or 1). If set (1), then memory migration is enabled. By default this is off (0). See the \fBMemory Migration\fR section, below. .\" ==================== memory_pressure ==================== .TP -.IR memory_pressure " (since Linux 2.6.16)" +.IR cpuset.memory_pressure " (since Linux 2.6.16)" A measure of how much memory pressure the processes in this cpuset are causing. See the \fBMemory Pressure\fR section, below.
@@ -289,7 +289,7 @@ See the section, below. .\" ================= memory_pressure_enabled ================= .TP -.IR memory_pressure_enabled " (since Linux 2.6.16)" +.IR cpuset.memory_pressure_enabled " (since Linux 2.6.16)" Flag (0 or 1). This file is only present in the root cpuset, normally .IR /dev/cpuset .
@@ -301,7 +301,7 @@ See the \fBMemory Pressure\fR section, below. .\" ================== memory_spread_page ================== .TP -.IR memory_spread_page " (since Linux 2.6.17)" +.IR cpuset.memory_spread_page " (since Linux 2.6.17)" Flag (0 or 1). If set (1), pages in the kernel page cache (file-system buffers) are uniformly spread across the cpuset.
@@ -311,7 +311,7 @@ newly created cpusets. See the \fBMemory Spread\fR section, below. .\" ================== memory_spread_slab ================== .TP -.IR memory_spread_slab " (since Linux 2.6.17)" +.IR cpuset.memory_spread_slab " (since Linux 2.6.17)" Flag (0 or 1). If set (1), the kernel slab caches for file I/O (directory and inode structures) are
@@ -322,7 +322,7 @@ newly created cpusets. See the \fBMemory Spread\fR section, below. .\" ================== sched_load_balance ================== .TP -.IR sched_load_balance " (since Linux 2.6.24)" +.IR cpuset.sched_load_balance " (since Linux 2.6.24)" Flag (0 or 1). If set (1, the default) the kernel will automatically load balance processes in that cpuset over
@@ -336,7 +336,7 @@ flag set. See \fBScheduler Load Balancing\fR, below, for further details. .\" ================== sched_relax_domain_level ================== .TP -.IR sched_relax_domain_level " (since Linux 2.6.26)" +.IR cpuset.sched_relax_domain_level " (since Linux 2.6.26)" Integer, between \-1 and a small positive value. The .I sched_relax_domain_level
@@ -529,7 +529,7 @@ It's up to the batch manager or other user code to decide what action to take if it detects signs of memory pressure. .PP Unless memory pressure calculation is enabled by setting the pseudo-file -.IR /dev/cpuset/memory_pressure_enabled , +.IR /dev/cpuset/cpuset.memory_pressure_enabled , it is not computed for any cpuset, and reads from any .I memory_pressure always return zero, as represented by the ASCII string "0\en".
@@ -571,7 +571,7 @@ by simply dropping them, though if that page is needed again, it will have to be reread from disk. .PP The -.I memory_pressure +.I cpuset.memory_pressure file provides an integer number representing the recent (half-life of 10 seconds) rate of entries to the direct reclaim code caused by any process in the cpuset, in units of reclaims attempted per second,
@@ -582,19 +582,19 @@ There are two Boolean flag files per cpuset that control where the kernel allocates pages for the file-system buffers and related in-kernel data structures. They are called -.I memory_spread_page +.I cpuset.memory_spread_page and -.IR memory_spread_slab . +.IR cpuset.memory_spread_slab . .PP If the per-cpuset Boolean flag file -.I memory_spread_page +.I cpuset.memory_spread_page is set, then the kernel will spread the file-system buffers (page cache) evenly over all the nodes that the faulting process is allowed to use, instead of preferring to put those pages on the node where the process is running. .PP If the per-cpuset Boolean flag file -.I memory_spread_slab +.I cpuset.memory_spread_slab is set, then the kernel will spread some file-system-related slab caches, such as those for inodes and directory entries, evenly over all the nodes
@@ -633,9 +633,9 @@ memory policy most recently specified by these calls is automatically reapplied. .PP Both -.I memory_spread_page +.I cpuset.memory_spread_page and -.I memory_spread_slab +.I cpuset.memory_spread_slab are Boolean flag files. By default they contain "0", meaning that the feature is off for that cpuset.
@@ -662,7 +662,7 @@ thread initializing or reading in the data set. .\" ================== Memory Migration ================== .SS Memory Migration Normally, under the default setting (disabled) of -.IR memory_migrate , +.IR cpuset.memory_migrate , once a page is allocated (given a physical page of main memory) then that page stays on whatever node it was allocated, so long as it remains allocated, even if the
@@ -1014,10 +1014,10 @@ is currently mounted. .SH WARNINGS .SS Enabling memory_pressure By default, the per-cpuset file -.I memory_pressure +.I cpuset.memory_pressure always contains zero (0). Unless this feature is enabled by writing "1" to the pseudo-file -.IR /dev/cpuset/memory_pressure_enabled , +.IR /dev/cpuset/cpuset.memory_pressure_enabled , the kernel does not compute per-cpuset .IR memory_pressure .
@@ -1035,7 +1035,7 @@ For example, if the command: .in +4n .nf -echo 19 > mems +echo 19 > cpuset.mems .fi .in
@@ -1052,7 +1052,7 @@ errors, as in the example: .in +4n .nf -/bin/echo 19 > mems +/bin/echo 19 > cpuset.mems /bin/echo: write error: Invalid argument .fi .in
@@ -1129,16 +1129,16 @@ not already in its parent. .B EACCES Attempted to set, using .BR write (2), -.I cpu_exclusive +.I cpuset.cpu_exclusive or -.I mem_exclusive +.I cpuset.mem_exclusive on a cpuset whose parent lacks the same setting. .TP .B EACCES Attempted to .BR write (2) a -.I memory_pressure +.I cpuset.memory_pressure file. .TP .B EACCES
@@ -1190,18 +1190,18 @@ attribute of that cpuset or any of its siblings. Attempted to .BR write (2) an empty -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list to a cpuset which has attached processes or child cpusets. .TP .B EINVAL Attempted to .BR write (2) a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list which included a range with the second number smaller than the first number. .TP
@@ -1209,30 +1209,30 @@ the first number. Attempted to .BR write (2) a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list which included an invalid character in the string. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I cpus +.I cpuset.cpus file that did not include any online CPUs. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I mems +.I cpuset.mems file that did not include any online memory nodes. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I mems +.I cpuset.mems file that included a node that held no memory. .TP .B EIO
@@ -1296,18 +1296,18 @@ the process ID (PID) of a process to a cpuset .I tasks file when the cpuset had an empty -.I cpus +.I cpuset.cpus or empty -.I mems +.I cpuset.mems setting. .TP .B ENOSPC Attempted to .BR write (2) an empty -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems setting to a cpuset that has tasks attached. .TP
@@ -1321,9 +1321,9 @@ Attempted to remove a file from a cpuset directory. .TP .B ERANGE Specified a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list to the kernel which included a number too large for the kernel to set in its bitmasks. .TP
@@ -1349,7 +1349,7 @@ can be passed in the argument .IR pid . .\" ================== BUGS ================== .SH BUGS -.I memory_pressure +.I cpuset.memory_pressure cpuset files can be opened for writing, creation, or truncation, but then the .BR write (2)
@@ -1393,8 +1393,8 @@ and then attach the current shell to that cpuset. .RB "$" " cd /dev/cpuset" .RB "$" " mkdir Charlie" .RB "$" " cd Charlie" -.RB "$" " /bin/echo 2-3 > cpus" -.RB "$" " /bin/echo 1 > mems" +.RB "$" " /bin/echo 2-3 > cpuset.cpus" +.RB "$" " /bin/echo 1 > cpuset.mems" .RB "$" " /bin/echo $$ > tasks" # The current shell is now running in cpuset Charlie # The next line should display '/Charlie'
@@ -1439,9 +1439,9 @@ The following sequence of commands accomplishes this. .RB "$" " cd /dev/cpuset" .RB "$" " mkdir beta" .RB "$" " cd beta" -.RB "$" " /bin/echo 16-19 > cpus" -.RB "$" " /bin/echo 8-9 > mems" -.RB "$" " /bin/echo 1 > memory_migrate" +.RB "$" " /bin/echo 16-19 > cpuset.cpus" +.RB "$" " /bin/echo 8-9 > cpuset.mems" +.RB "$" " /bin/echo 1 > cpuset.memory_migrate" .RB "$" " while read i; do /bin/echo $i; done < ../alpha/tasks > tasks" .fi .in
Signature · 6 lines
1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1360015082-1322-1-git-send-email-spaillard-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org
Hi Simon,
Quoted 1 line · Simon Paillard
See fix
4160df82b3forDocumentation/cgroups/cpusets.txtin kernel
I can't find that commit, and I'd need a bit more explanation of what this patch is about.
Cheers,
Michael
Quoted 363 lines
--- man7/cpuset.7 | 98 ++++++++++++++++++++++++++++----------------------------- 1 file changed, 49 insertions(+), 49 deletions(-)man7/cpuset.7 +49
-50@@ -192,7 +192,7 @@ and all child cpuset directories have been removed. See the \fBNotify On Release\fR section, below. .\" ====================== cpus ====================== .TP -.I cpus +.I cpuset.cpus List of the physical numbers of the CPUs on which processes in that cpuset are allowed to execute. See \fBList Format\fR below for a description of the@@ -205,7 +205,7 @@ writing a new list to its file. .\" ==================== cpu_exclusive ==================== .TP -.I cpu_exclusive +.I cpuset.cpu_exclusive Flag (0 or 1). If set (1), the cpuset has exclusive use of its CPUs (no sibling or cousin cpuset may overlap CPUs).@@ -234,7 +234,7 @@ of any cpuset are always a subset of the of its parent cpuset. .\" ====================== mems ====================== .TP -.I mems +.I cpuset.mems List of memory nodes on which processes in this cpuset are allowed to allocate memory. See \fBList Format\fR below for a description of the@@ -242,7 +242,7 @@ format of .IR mems . .\" ==================== mem_exclusive ==================== .TP -.I mem_exclusive +.I cpuset.mem_exclusive Flag (0 or 1). If set (1), the cpuset has exclusive use of its memory nodes (no sibling or cousin may overlap).@@ -258,7 +258,7 @@ nodes of any cpuset are always a subset of the memory nodes of that cpuset's parent cpuset. .\" ==================== mem_hardwall ==================== .TP -.IR mem_hardwall " (since Linux 2.6.26)" +.IR cpuset.mem_hardwall " (since Linux 2.6.26)" Flag (0 or 1). If set (1), the cpuset is a \fBHardwall\fR cpuset (see below.) Unlike \fBmem_exclusive\fR,@@ -269,14 +269,14 @@ By default this is off (0). Newly created cpusets also initially default this to off (0). .\" ==================== memory_migrate ==================== .TP -.IR memory_migrate " (since Linux 2.6.16)" +.IR cpuset.memory_migrate " (since Linux 2.6.16)" Flag (0 or 1). If set (1), then memory migration is enabled. By default this is off (0). See the \fBMemory Migration\fR section, below. .\" ==================== memory_pressure ==================== .TP -.IR memory_pressure " (since Linux 2.6.16)" +.IR cpuset.memory_pressure " (since Linux 2.6.16)" A measure of how much memory pressure the processes in this cpuset are causing. See the \fBMemory Pressure\fR section, below.@@ -289,7 +289,7 @@ See the section, below. .\" ================= memory_pressure_enabled ================= .TP -.IR memory_pressure_enabled " (since Linux 2.6.16)" +.IR cpuset.memory_pressure_enabled " (since Linux 2.6.16)" Flag (0 or 1). This file is only present in the root cpuset, normally .IR /dev/cpuset .@@ -301,7 +301,7 @@ See the \fBMemory Pressure\fR section, below. .\" ================== memory_spread_page ================== .TP -.IR memory_spread_page " (since Linux 2.6.17)" +.IR cpuset.memory_spread_page " (since Linux 2.6.17)" Flag (0 or 1). If set (1), pages in the kernel page cache (file-system buffers) are uniformly spread across the cpuset.@@ -311,7 +311,7 @@ newly created cpusets. See the \fBMemory Spread\fR section, below. .\" ================== memory_spread_slab ================== .TP -.IR memory_spread_slab " (since Linux 2.6.17)" +.IR cpuset.memory_spread_slab " (since Linux 2.6.17)" Flag (0 or 1). If set (1), the kernel slab caches for file I/O (directory and inode structures) are@@ -322,7 +322,7 @@ newly created cpusets. See the \fBMemory Spread\fR section, below. .\" ================== sched_load_balance ================== .TP -.IR sched_load_balance " (since Linux 2.6.24)" +.IR cpuset.sched_load_balance " (since Linux 2.6.24)" Flag (0 or 1). If set (1, the default) the kernel will automatically load balance processes in that cpuset over@@ -336,7 +336,7 @@ flag set. See \fBScheduler Load Balancing\fR, below, for further details. .\" ================== sched_relax_domain_level ================== .TP -.IR sched_relax_domain_level " (since Linux 2.6.26)" +.IR cpuset.sched_relax_domain_level " (since Linux 2.6.26)" Integer, between \-1 and a small positive value. The .I sched_relax_domain_level@@ -529,7 +529,7 @@ It's up to the batch manager or other user code to decide what action to take if it detects signs of memory pressure. .PP Unless memory pressure calculation is enabled by setting the pseudo-file -.IR /dev/cpuset/memory_pressure_enabled , +.IR /dev/cpuset/cpuset.memory_pressure_enabled , it is not computed for any cpuset, and reads from any .I memory_pressure always return zero, as represented by the ASCII string "0\en".@@ -571,7 +571,7 @@ by simply dropping them, though if that page is needed again, it will have to be reread from disk. .PP The -.I memory_pressure +.I cpuset.memory_pressure file provides an integer number representing the recent (half-life of 10 seconds) rate of entries to the direct reclaim code caused by any process in the cpuset, in units of reclaims attempted per second,@@ -582,19 +582,19 @@ There are two Boolean flag files per cpuset that control where the kernel allocates pages for the file-system buffers and related in-kernel data structures. They are called -.I memory_spread_page +.I cpuset.memory_spread_page and -.IR memory_spread_slab . +.IR cpuset.memory_spread_slab . .PP If the per-cpuset Boolean flag file -.I memory_spread_page +.I cpuset.memory_spread_page is set, then the kernel will spread the file-system buffers (page cache) evenly over all the nodes that the faulting process is allowed to use, instead of preferring to put those pages on the node where the process is running. .PP If the per-cpuset Boolean flag file -.I memory_spread_slab +.I cpuset.memory_spread_slab is set, then the kernel will spread some file-system-related slab caches, such as those for inodes and directory entries, evenly over all the nodes@@ -633,9 +633,9 @@ memory policy most recently specified by these calls is automatically reapplied. .PP Both -.I memory_spread_page +.I cpuset.memory_spread_page and -.I memory_spread_slab +.I cpuset.memory_spread_slab are Boolean flag files. By default they contain "0", meaning that the feature is off for that cpuset.@@ -662,7 +662,7 @@ thread initializing or reading in the data set. .\" ================== Memory Migration ================== .SS Memory Migration Normally, under the default setting (disabled) of -.IR memory_migrate , +.IR cpuset.memory_migrate , once a page is allocated (given a physical page of main memory) then that page stays on whatever node it was allocated, so long as it remains allocated, even if the@@ -1014,10 +1014,10 @@ is currently mounted. .SH WARNINGS .SS Enabling memory_pressure By default, the per-cpuset file -.I memory_pressure +.I cpuset.memory_pressure always contains zero (0). Unless this feature is enabled by writing "1" to the pseudo-file -.IR /dev/cpuset/memory_pressure_enabled , +.IR /dev/cpuset/cpuset.memory_pressure_enabled , the kernel does not compute per-cpuset .IR memory_pressure .@@ -1035,7 +1035,7 @@ For example, if the command: .in +4n .nf -echo 19 > mems +echo 19 > cpuset.mems .fi .in@@ -1052,7 +1052,7 @@ errors, as in the example: .in +4n .nf -/bin/echo 19 > mems +/bin/echo 19 > cpuset.mems /bin/echo: write error: Invalid argument .fi .in@@ -1129,16 +1129,16 @@ not already in its parent. .B EACCES Attempted to set, using .BR write (2), -.I cpu_exclusive +.I cpuset.cpu_exclusive or -.I mem_exclusive +.I cpuset.mem_exclusive on a cpuset whose parent lacks the same setting. .TP .B EACCES Attempted to .BR write (2) a -.I memory_pressure +.I cpuset.memory_pressure file. .TP .B EACCES@@ -1190,18 +1190,18 @@ attribute of that cpuset or any of its siblings. Attempted to .BR write (2) an empty -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list to a cpuset which has attached processes or child cpusets. .TP .B EINVAL Attempted to .BR write (2) a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list which included a range with the second number smaller than the first number. .TP@@ -1209,30 +1209,30 @@ the first number. Attempted to .BR write (2) a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list which included an invalid character in the string. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I cpus +.I cpuset.cpus file that did not include any online CPUs. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I mems +.I cpuset.mems file that did not include any online memory nodes. .TP .B EINVAL Attempted to .BR write (2) a list to a -.I mems +.I cpuset.mems file that included a node that held no memory. .TP .B EIO@@ -1296,18 +1296,18 @@ the process ID (PID) of a process to a cpuset .I tasks file when the cpuset had an empty -.I cpus +.I cpuset.cpus or empty -.I mems +.I cpuset.mems setting. .TP .B ENOSPC Attempted to .BR write (2) an empty -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems setting to a cpuset that has tasks attached. .TP@@ -1321,9 +1321,9 @@ Attempted to remove a file from a cpuset directory. .TP .B ERANGE Specified a -.I cpus +.I cpuset.cpus or -.I mems +.I cpuset.mems list to the kernel which included a number too large for the kernel to set in its bitmasks. .TP@@ -1349,7 +1349,7 @@ can be passed in the argument .IR pid . .\" ================== BUGS ================== .SH BUGS -.I memory_pressure +.I cpuset.memory_pressure cpuset files can be opened for writing, creation, or truncation, but then the .BR write (2)@@ -1393,8 +1393,8 @@ and then attach the current shell to that cpuset. .RB "$" " cd /dev/cpuset" .RB "$" " mkdir Charlie" .RB "$" " cd Charlie" -.RB "$" " /bin/echo 2-3 > cpus" -.RB "$" " /bin/echo 1 > mems" +.RB "$" " /bin/echo 2-3 > cpuset.cpus" +.RB "$" " /bin/echo 1 > cpuset.mems" .RB "$" " /bin/echo $$ > tasks" # The current shell is now running in cpuset Charlie # The next line should display '/Charlie'@@ -1439,9 +1439,9 @@ The following sequence of commands accomplishes this. .RB "$" " cd /dev/cpuset" .RB "$" " mkdir beta" .RB "$" " cd beta" -.RB "$" " /bin/echo 16-19 > cpus" -.RB "$" " /bin/echo 8-9 > mems" -.RB "$" " /bin/echo 1 > memory_migrate" +.RB "$" " /bin/echo 16-19 > cpuset.cpus" +.RB "$" " /bin/echo 8-9 > cpuset.mems" +.RB "$" " /bin/echo 1 > cpuset.memory_migrate" .RB "$" " while read i; do /bin/echo $i; done < ../alpha/tasks > tasks" .fi .in --1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Author of "The Linux Programming Interface"; http://man7.org/tlpi/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): CAKgNAkh_3wdezRJqapvgiaK8_YGfFAdMJWLF379QZa+Omq9AKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org
Quoted 5 lines · Michael Kerrisk (man-pages)
Quoted 1 line · Simon Paillard
See fix
4160df82b3forDocumentation/cgroups/cpusets.txtin kernelI can't find that commit, and I'd need a bit more explanation of what this patch is about.
e21a05cb408bb9f244f11a0813d4b355dad0822e doc: cpuset: Update the cpuset flag file
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdiff;h=e21a05cb408bb9f244f11a0813d4b355dad0822e
This prefix can be observed from the cpuset sysfs entries.
Signature · 5 lines
Simon Paillard -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 20130204221722.GN17324-8MNqHwMchPhGJ/[email protected]
Quoted 11 lines · Simon Paillard
Quoted 5 lines · Michael Kerrisk (man-pages)
Quoted 1 line · Simon Paillard
See fix
4160df82b3forDocumentation/cgroups/cpusets.txtin kernelI can't find that commit, and I'd need a bit more explanation of what this patch is about.
e21a05cb408bb9f244f11a0813d4b355dad0822edoc: cpuset: Update the cpuset flag file
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commitdiff;h=e21a05cb408bb9f244f11a0813d4b355dad0822eThis prefix can be observed from the cpuset sysfs entries.
Okay -- I've applied this patch. Thanks Simon.
Cheers,
Michael
Signature · 7 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Author of "The Linux Programming Interface"; http://man7.org/tlpi/ -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 2 lines · Simon Paillard
See fix
4160df82b3forDocumentation/cgroups/cpusets.txtin kernel
---
Notes:
* To avoid too heavy phrasing, only direct references like file have been fixed, not all references. Michael, if you think all reference to flags shall be prefixed, tell me.
* I cannot find a kernel version without 'cpuset.' prefix commit in cpuset.c, but I may miss something.
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=history;f=kernel/cpuset.c
* We can find sources of improvements from the changelog of cpuset doc in kernel, that's not a surprise :)
http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=history;f=Documentation/cgroups/cpusets.txt
--> IMO the manpage should reference the libraries like libcgroup or python cpuset, but I wonder about the formatting
Signature · 5 lines
Simon Paillard -- To unsubscribe from this list: send the line "unsubscribe linux-man" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html