Skip to contentSkip to conversation

libgles-omap3: Add v4.08.00.01 of the Graphics SDK

PATCH New [email protected] 3 participants 10 messages Feb 6, 2013 – Feb 18, 2013 3 messages not in the archive

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 libgles-omap3: Add v4.08.00.01 of the Graphics SDK

From: Franklin S. Cooper Jr <[email protected]>

* Add version v4.08.00.01 of the Graphics SDK.
* Add X11 support via DRI/DRM Xorg driver
* Replace pvrsrvinit with pvrsrvctl (Imagination Technologies based change)

---
Version 2:
Update SRC_URI link to use official SDK download link

 .../libgles/libgles-omap3-4.08.00.01/rc.pvr        |  124 ++++++++++++++++++
 .../libgles/libgles-omap3-4.08.00.01/rc_dri.pvr    |  136 ++++++++++++++++++++
 .../libgles/libgles-omap3_4.08.00.01.bb            |   76 +++++++++++
 3 files changed, 336 insertions(+), 0 deletions(-)
 create mode 100755 recipes-graphics/libgles/libgles-omap3-4.08.00.01/rc.pvr
 create mode 100755 recipes-graphics/libgles/libgles-omap3-4.08.00.01/rc_dri.pvr
 create mode 100644 recipes-graphics/libgles/libgles-omap3_4.08.00.01.bb
recipes-graphics/libgles/libgles-omap3-4.08.00.01/rc.pvr new file +124 -0
new file mode 100755
index 0000000..7b5cefa
@@ -0,0 +1,124 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+    # looks like there is no display, so let's exit
+    exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+	rmmod bufferclass_ti
+	rmmod omaplfb 2>/dev/null
+	rmmod pvrsrvkm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+	insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+    if [ "$?" != "0" ]
+    then
+        echo "Could not find pvrsrvkm driver"
+        exit 1
+    fi
+
+	modprobe omaplfb
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi 
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	devmem2 0x44e01104 w 0x0 > /dev/null
+	devmem2 0x44e00904 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac
recipes-graphics/libgles/libgles-omap3-4.08.00.01/rc_dri.pvr new file +136 -0

136 lines not on this page · raw message

recipes-graphics/libgles/libgles-omap3_4.08.00.01.bb new file +76 -0

76 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 2/2 omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

From: Franklin S. Cooper Jr <[email protected]>

* Add version 4.08.00.01 of the SGX modules.

---
Version 2:
Update SRC_URI link to use official SDK download link

 .../omap3-sgx-modules_4.08.00.01.bb                |   56 ++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644 recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb
recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb new file +56 -0
new file mode 100644
index 0000000..4885946
@@ -0,0 +1,56 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_08_00_01"
+IMGPV = "1.9.2139099"
+BINFILE = "Graphics_SDK_setuplinux_${SGXPV}.bin"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+DEFAULT_PREFERENCE = "-1"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] = "dd0d994a48ecc4293f272a1fddddf159"
+SRC_URI[sha256sum] = "fd721288c95314e0d676dd89462e1dec994e185cb608bcb8ac4a4b5809f9693a"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    if [ "${SUPPORT_XORG}" = "1" ]; then
+        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    fi
+}
Signature · 1 line
1.7.0.4
#2 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 4 lines · On Wed, Feb 6, 2013 at 7:57 AM, <[email protected]> wrote:

From: Franklin S. Cooper Jr <[email protected]>

* Add version 4.08.00.01 of the SGX modules.

Quoted 9 lines

---
Version 2:
Update SRC_URI link to use official SDK download link

 .../omap3-sgx-modules_4.08.00.01.bb                |   56 ++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644 recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

Just a question: With which kernel version did you test that - because 4.05 currently used need patching for kernels > 3.3 for me.

Andreas

#3 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

3.2

Denys

-----Original Message-----
From: Andreas Müller [[email protected]]
Received: Wednesday, 06 Feb 2013, 2:34
To: [email protected] [[email protected]]
CC: [email protected] [[email protected]]
Subject: Re: [meta-ti] [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 4 lines · On Wed, Feb 6, 2013 at 7:57 AM, <[email protected]> wrote:

From: Franklin S. Cooper Jr <[email protected]>

* Add version 4.08.00.01 of the SGX modules.

Quoted 9 lines

---
Version 2:
Update SRC_URI link to use official SDK download link

 .../omap3-sgx-modules_4.08.00.01.bb                |   56 ++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644 recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

Just a question: With which kernel version did you test that - because 4.05 currently used need patching for kernels > 3.3 for me.

Andreas
_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti

#4 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 31 lines · Denys

3.2

Denys

-----Original Message-----
From: Andreas Müller [[email protected]]
Received: Wednesday, 06 Feb 2013, 2:34
To: [email protected] [[email protected]]
CC: [email protected] [[email protected]]
Subject: Re: [meta-ti] [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 9 lines · On Wed, Feb 6, 2013 at 7:57 AM, <[email protected]> wrote:

From: Franklin S. Cooper Jr <[email protected]>

* Add version 4.08.00.01 of the SGX modules.

---
Version 2:
Update SRC_URI link to use official SDK download link

Quoted 6 lines
 .../omap3-sgx-modules_4.08.00.01.bb                |   56
++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

Quoted 4 lines

Just a question: With which kernel version did you test that - because 4.05 currently used need patching for kernels > 3.3 for me.

Andreas

With linux-omap 3.5 which I use in meta-gumstix-community for a while I get

ERROR: Function failed: do_compile (see /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 for further information)
ERROR: Logfile of failure stored in:
/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 12 -e MAKEFLAGS= KERNEL_PATH=/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel KERNEL_SRC=/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel
KERNEL_VERSION=3.5.0 CC=arm-angstrom-linux-gnueabi-gcc -march=armv7-a
-mthumb-interwork -mfloat-abi=softfp -mfpu=neon
--sysroot=/home/andreas/tmp/oe-core-eglibc/sysroots/overo
-mno-thumb-interwork -marm LD=arm-angstrom-linux-gnueabi-ld --sysroot=/home/andreas/tmp/oe-core-eglibc/sysroots/overo
AR=arm-angstrom-linux-gnueabi-ar BUILD=release TI_PLATFORM=omap3630
SUPPORT_XORG=1
| make -C /home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel M=pwd
| make[1]: Entering directory
`/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel'

|   LD      /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/built-in.o
|   CC [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o
|   LD [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bufferclass_ti.o
|   LD      /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/built-in.o
|   CC [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/pvr_drm_stubs.o

| make[3]: *** No rule to make target /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm_auth.o', needed by /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm.o'.
Stop.
| make[2]: *** [/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm] Error 2
| make[1]: *** [_module_/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM] Error 2
| make[1]: Leaving directory
`/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel'

| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see

/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 for further information)

I added CONFIG_DRM_OMAP=m (CONFIG_DRM=y was there already at first run) but the same error.

drm_auth.o is not found in my sysroot/kernel-image-folder but was built and can be found in the build folder of the kernel.

Any thoughts?

Andreas

#5 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 84 lines · Andreas Müller
Quoted 31 lines · Denys

3.2

Denys

-----Original Message-----
From: Andreas Müller [[email protected]]
Received: Wednesday, 06 Feb 2013, 2:34
To: [email protected] [[email protected]]
CC: [email protected] [[email protected]]
Subject: Re: [meta-ti] [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 9 lines · On Wed, Feb 6, 2013 at 7:57 AM, <[email protected]> wrote:

From: Franklin S. Cooper Jr <[email protected]>

* Add version 4.08.00.01 of the SGX modules.

---
Version 2:
Update SRC_URI link to use official SDK download link

Quoted 6 lines
 .../omap3-sgx-modules_4.08.00.01.bb                |   56
++++++++++++++++++++
 1 files changed, 56 insertions(+), 0 deletions(-)
 create mode 100644

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

Quoted 4 lines

Just a question: With which kernel version did you test that - because 4.05 currently used need patching for kernels > 3.3 for me.

Andreas

With linux-omap 3.5 which I use in meta-gumstix-community for a while I get

ERROR: Function failed: do_compile (see /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 for further information)
ERROR: Logfile of failure stored in:
/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 12 -e MAKEFLAGS= KERNEL_PATH=/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel KERNEL_SRC=/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel
KERNEL_VERSION=3.5.0 CC=arm-angstrom-linux-gnueabi-gcc -march=armv7-a
-mthumb-interwork -mfloat-abi=softfp -mfpu=neon
--sysroot=/home/andreas/tmp/oe-core-eglibc/sysroots/overo
-mno-thumb-interwork -marm LD=arm-angstrom-linux-gnueabi-ld --sysroot=/home/andreas/tmp/oe-core-eglibc/sysroots/overo
AR=arm-angstrom-linux-gnueabi-ar BUILD=release TI_PLATFORM=omap3630
SUPPORT_XORG=1
| make -C /home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel M=pwd
| make[1]: Entering directory
`/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel'

|   LD      /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/built-in.o
|   CC [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bc_cat.o
|   LD [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/bufferclass_ti/bufferclass_ti.o
|   LD      /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/built-in.o
|   CC [M]  /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/pvr_drm_stubs.o

| make[3]: *** No rule to make target /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm_auth.o', needed by /home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm.o'.
Stop.
| make[2]: *** [/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm] Error 2
| make[1]: *** [_module_/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM] Error 2
| make[1]: Leaving directory
`/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/src/kernel'

| make: *** [all] Error 2
| ERROR: oe_runmake failed
| ERROR: Function failed: do_compile (see

/home/andreas/tmp/oe-core-eglibc/work/overo-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/temp/log.do_compile.1757 for further information)

I added CONFIG_DRM_OMAP=m (CONFIG_DRM=y was there already at first run) but the same error.

Quoted 6 lines

drm_auth.o is not found in my sysroot/kernel-image-folder but was built and can be found in the build folder of the kernel.

Any thoughts?

Andreas

One - maybe stupid - question: Have you tested with latest oe-core -or do you have

commit c753f9d59f4d0a5af4ea5deb6e2b9609e05314e2

Author: Mark Asselstine <[email protected]>
Date:   Thu Jan 31 13:31:03 2013 -0500

kernel: avoid copying unnecessary files during do_install

kernel_do_install() populates $kerneldir with files needed to build external modules. To accomplish this there are several copy commands to get source from the kernel source tree and build trees after which a 'clean' is performed. Since we are copying from the build tree we get about 1G of .o and .cmd files copied over only to have them removed when we clean. This adds additional IO overhead as well as overhead caused by pseudo. By avoiding copying these files in the first place we get multiple gains:
* avoid initial copy
* avoid file deletes during clean
* reduce pseudo overhead

Additionally we are making use of cpio vs cp which tends to be significantly faster at performing copies.

With these changes I observe a 15-30% decrease in the time to complete the do_install() operation on the kernel.

[YOCTO #3517]

in your repo?

Andreas

#6 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 29 lines · Andreas Müller

One - maybe stupid - question: Have you tested with latest oe-core -or do you have

commit c753f9d59f4d0a5af4ea5deb6e2b9609e05314e2

Author: Mark Asselstine <[email protected]>
Date:   Thu Jan 31 13:31:03 2013 -0500

kernel: avoid copying unnecessary files during do_install

kernel_do_install() populates $kerneldir with files needed to build external modules. To accomplish this there are several copy commands to get source from the kernel source tree and build trees after which a 'clean' is performed. Since we are copying from the build tree we get about 1G of .o and .cmd files copied over only to have them removed when we clean. This adds additional IO overhead as well as overhead caused by pseudo. By avoiding copying these files in the first place we get multiple gains:
* avoid initial copy
* avoid file deletes during clean
* reduce pseudo overhead

Additionally we are making use of cpio vs cp which tends to be significantly faster at performing copies.

With these changes I observe a 15-30% decrease in the time to complete the do_install() operation on the kernel.

[YOCTO #3517]

Quoted 7 lines

in your repo?

Andreas

FYI: I removed meta-gumstix-community from my layers and ran

MACHINE="beagleboard" bitbake omap3-sgx-modules

and get same:

| make[3]: *** No rule to make target /home/Superandy/tmp/oe-core-eglibc/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm_auth.o', needed by /home/Superandy/tmp/oe-core-eglibc/work/beagleboard-angstrom-linux-gnueabi/omap3-sgx-modules/4.08.00.01-r122a/Graphics_SDK_4_08_00_01/GFX_Linux_KM/services4/3rdparty/linux_drm/drm.o'.
Stop.

so I think it is related to changes in other layers. Did you test with master or danny?

Andreas

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): CALbNGRTnx5Tg8Vcme4eZ77bDSzwkaoHHuTa4C+z6tfM+bB4jwA@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): CALbNGRRt7QoifHFqQMDeSY7g2ABt15_KhgBos6ijwGbLAOcpPw@mail.gmail.com

#10 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 12 lines · Andreas Müller
Quoted 10 lines · Andreas Müller
Quoted 6 lines · Franklin

Yes I've got this working for me on danny. However, I do use a non x11 build which is most likely the reason why I am not having this problem.

A related thread about possible issues with x11 distributions
https://lists.yoctoproject.org/pipermail/meta-ti/2012-September/001502.html

Have fixed this - after testing I will send a follow up patch series because I am really burning to see the X11 stuff...

Quoted 8 lines
Quoted 1 line

Andreas

Aargh - during tests I ran into other issues with oe-core/meta-oe current HEAD so I can not do run-tests. Build-tested results are at

https://gitorious.org/schnitzeltony-oe-meta/meta-ti/commits/sgx-test

As soon as HEADS are back and build working images I'll return on this...

OK I managed to build and am testing now. When loading pvr_drv X complains for wrong ABI (is 10 expected 13). Is there a version of Graphics SDK available with support for xserver 1.13? I saw v4.08.00.02 supports xserver 1.12. Are there any other sources for the userspace-driver part?

Andreas

#11 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 20 lines · Andreas Müller
Quoted 18 lines · Andreas Müller
Quoted 11 lines · Andreas Müller
Quoted 6 lines · Franklin

Yes I've got this working for me on danny. However, I do use a non x11 build which is most likely the reason why I am not having this problem.

A related thread about possible issues with x11 distributions
https://lists.yoctoproject.org/pipermail/meta-ti/2012-September/001502.html

Have fixed this - after testing I will send a follow up patch series because I am really burning to see the X11 stuff...

Andreas

Aargh - during tests I ran into other issues with oe-core/meta-oe current HEAD so I can not do run-tests. Build-tested results are at

https://gitorious.org/schnitzeltony-oe-meta/meta-ti/commits/sgx-test

Quoted 7 lines
Quoted 2 lines

As soon as HEADS are back and build working images I'll return on this...

OK I managed to build and am testing now. When loading pvr_drv X complains for wrong ABI (is 10 expected 13). Is there a version of Graphics SDK available with support for xserver 1.13? I saw v4.08.00.02 supports xserver 1.12. Are there any other sources for the userspace-driver part?

Andreas,

I just pushed v4.08.00.01. Please let us know if you have any further comments or patches.

Currently, v4.08.00.02 has some issues compiling from the recipes, as historically recipes didn't use Graphics SDK's Makefiles - we will be reworking that soon. As well as we'll try to address installer's size issue.

As of the xserver support - 1.12 from v4.08.00.02 is as good as it gets right now. While X11 support hasn't been the first priority for Graphics SDK lately, that might change in the near future...

Signature · 1 line
Denys
#12 lore raw

Re: [PATCH 2/2] omap3-sgx-modules: Add v4.08.00.01 of the SGX modules

Quoted 38 lines · Denys Dmytriyenko
Quoted 20 lines · Andreas Müller
Quoted 18 lines · Andreas Müller
Quoted 11 lines · Andreas Müller
Quoted 6 lines · Franklin

Yes I've got this working for me on danny. However, I do use a non x11 build which is most likely the reason why I am not having this problem.

A related thread about possible issues with x11 distributions
https://lists.yoctoproject.org/pipermail/meta-ti/2012-September/001502.html

Have fixed this - after testing I will send a follow up patch series because I am really burning to see the X11 stuff...

Andreas

Aargh - during tests I ran into other issues with oe-core/meta-oe current HEAD so I can not do run-tests. Build-tested results are at

https://gitorious.org/schnitzeltony-oe-meta/meta-ti/commits/sgx-test

Quoted 7 lines
Quoted 2 lines

As soon as HEADS are back and build working images I'll return on this...

OK I managed to build and am testing now. When loading pvr_drv X complains for wrong ABI (is 10 expected 13). Is there a version of Graphics SDK available with support for xserver 1.13? I saw v4.08.00.02 supports xserver 1.12. Are there any other sources for the userspace-driver part?

Andreas,

I just pushed v4.08.00.01. Please let us know if you have any further comments or patches.

Currently, v4.08.00.02 has some issues compiling from the recipes, as historically recipes didn't use Graphics SDK's Makefiles - we will be reworking that soon. As well as we'll try to address installer's size issue.

Quoted 6 lines

As of the xserver support - 1.12 from v4.08.00.02 is as good as it gets right now. While X11 support hasn't been the first priority for Graphics SDK lately, that might change in the near future...

--
Denys

I got them to build for X with kernel 3.2 (begleboard) and 3.5 (overo). This you can see at [1] - but it needs some cleanup. More or less accidently I found that much of what I did is already available at [2]. As said - run tests failed due to mismatching ABI version for pvr_dri. So I stopped further activities and wait for later SDK with matching ABI.

Andreas

[1] https://gitorious.org/schnitzeltony-oe-meta/meta-ti/commits/sgx-test
[2] https://github.com/RobertCNelson/ti-sdk-pvr/tree/4.08.00.02