clk: tegra30: fix wrong clock index between se to sata_cold
Subsystems (3)
PATCH 1/1 clk: tegra30: fix wrong clock index between se to sata_cold
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to sata_cold.
--- drivers/clk/tegra/clk-tegra30.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/clk/tegra/clk-tegra30.c +3 -3
@@ -332,9 +332,9 @@ enum tegra30_clk { cdev1, cdev2, cpu_g =96 , cpu_lp, gr3d2, mselect, tsensor, i2s3, i2s4, i2c4, sbc5, sbc6, d_audio, apbif, dam0, dam1, dam2, hda2codec_2x, atomics, audio0_2x, audio1_2x, audio2_2x, audio3_2x, audio4_2x, - spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, se, - hda2hdmi, sata_cold, uartb =160 , vfir, spdif_out, spdif_in, vi, - vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2, + spdif_2x, actmon, extern1, extern2, extern3, sata_oob, sata, hda, + se =127 , hda2hdmi, sata_cold, uartb =160 , vfir, spdif_out, spdif_in, + vi, vi_sensor, fuse, fuse_burn, cve, tvo, clk_32k, clk_m, clk_m_div2, clk_m_div4, pll_ref, pll_c, pll_c_out1, pll_m, pll_m_out1, pll_p, pll_p_out1, pll_p_out2, pll_p_out3, pll_p_out4, pll_a, pll_a_out0, pll_d, pll_d_out0, pll_d2, pll_d2_out0, pll_u, pll_x, pll_x_out0, pll_e,
Signature · 1 line
1.8.1.1
PATCH 1/1 clk: tegra30: fix wrong clock index between se to sata_cold
Quoted 3 lines · Joseph Lo
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to
sata_cold.
I've applied this to Tegra's for-3.9/soc-ccf-fixes branch, on the assumption Mike is OK with it. I'll hold a pull request for his ack, and probably for a day or too in case any more clk-related fixes show up.
PATCH 1/1 clk: tegra30: fix wrong clock index between se to sata_cold
Quoting Stephen Warren (2013-02-07 11:14:38)
Quoted 8 lines · Joseph Lo
Quoted 3 lines
The index of se should be 127. And the previous clock index was 125. So we need to set up the index for se to get the correct index between se to
sata_cold.I've applied this to Tegra's for-3.9/soc-ccf-fixes branch, on the assumption Mike is OK with it. I'll hold a pull request for his ack, and probably for a day or too in case any more clk-related fixes show up.