i.MX53 - add WEIM register defines
Subject: i.MX53: Add WEIM register defines ( same as i.MX51 )
diff -Naur bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h
--- bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h 2013-02-04
06:24:51.000000000 -0800
+++ bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h 2013-02-06
23:14:45.982747680 -0800
@@ -1,6 +1,17 @@
#ifndef __MACH_IMX53_REGS_H
#define __MACH_IMX53_REGS_H
+/* WEIM registers */
+#define WEIM_CSxGCR1(n) (((n) * 0x18) + 0x00) +#define WEIM_CSxGCR2(n) (((n) * 0x18) + 0x04) +#define WEIM_CSxRCR1(n) (((n) * 0x18) + 0x08) +#define WEIM_CSxRCR2(n) (((n) * 0x18) + 0x0c) +#define WEIM_CSxWCR1(n) (((n) * 0x18) + 0x10) +#define WEIM_CSxWCR2(n) (((n) * 0x18) + 0x14) +#define WEIM_WCR 0x90 +#define WEIM_WIAR 0x94 +#define WEIM_EAR 0x98
+
#define MX53_IROM_BASE_ADDR 0x0
#define MX53_SATA_BASE_ADDR 0x10000000
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 14 lines
Subject: i.MX53: Add WEIM register defines ( same as i.MX51 )
Signed-off-by George Pontis <[email protected]>diff -Naur
bb.a/arch/arm/mach-imx/include/mach/imx53-regs.hbb.b/arch/arm/mach-imx/include/mach/imx53-regs.h
---bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h2013-02-04
06:24:51.000000000 -0800
+++bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h2013-02-06
23:14:45.982747680 -0800(quoted diff) +0
-0@@ -1,6 +1,17 @@ #ifndef __MACH_IMX53_REGS_H #define __MACH_IMX53_REGS_H
Review line 13
Quoted 10 lines
(quoted diff) +10
-0+/* WEIM registers */ +#define WEIM_CSxGCR1(n) (((n) * 0x18) + 0x00) +#define WEIM_CSxGCR2(n) (((n) * 0x18) + 0x04) +#define WEIM_CSxRCR1(n) (((n) * 0x18) + 0x08) +#define WEIM_CSxRCR2(n) (((n) * 0x18) + 0x0c) +#define WEIM_CSxWCR1(n) (((n) * 0x18) + 0x10) +#define WEIM_CSxWCR2(n) (((n) * 0x18) + 0x14) +#define WEIM_WCR 0x90 +#define WEIM_WIAR 0x94 +#define WEIM_EAR 0x98
If register set is really same as i.MX51, then probably we should move these definitions from imx51-regs.h to imx5.h. Sascha?
---
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 14 lines · Alexander Shiyan
Quoted 14 lines
Subject: i.MX53: Add WEIM register defines ( same as i.MX51 )
Signed-off-by George Pontis <[email protected]>diff -Naur
bb.a/arch/arm/mach-imx/include/mach/imx53-regs.hbb.b/arch/arm/mach-imx/include/mach/imx53-regs.h
---bb.a/arch/arm/mach-imx/include/mach/imx53-regs.h2013-02-04
06:24:51.000000000 -0800
+++bb.b/arch/arm/mach-imx/include/mach/imx53-regs.h2013-02-06
23:14:45.982747680 -0800(quoted diff) +0
-0@@ -1,6 +1,17 @@ #ifndef __MACH_IMX53_REGS_H #define __MACH_IMX53_REGS_H
Quoted 13 lines
Review line 13
Quoted 10 lines
(quoted diff) +10
-0+/* WEIM registers */ +#define WEIM_CSxGCR1(n) (((n) * 0x18) + 0x00) +#define WEIM_CSxGCR2(n) (((n) * 0x18) + 0x04) +#define WEIM_CSxRCR1(n) (((n) * 0x18) + 0x08) +#define WEIM_CSxRCR2(n) (((n) * 0x18) + 0x0c) +#define WEIM_CSxWCR1(n) (((n) * 0x18) + 0x10) +#define WEIM_CSxWCR2(n) (((n) * 0x18) + 0x14) +#define WEIM_WCR 0x90 +#define WEIM_WIAR 0x94 +#define WEIM_EAR 0x98If register set is really same as i.MX51, then probably we should move these definitions from
imx51-regs.htoimx5.h. Sascha?
Even better add a imx53_setup_weimcs() function like we have for various other i.MXes in mach/weim.h.
(add a imx5_setup_weimcs function which has an additional base address argument. This would then be called from imx51_setup_weimcs/imx53_setup_weimcs).
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox