ARM: dts: add minimal DT support for DevKit8000
Subsystems (5)
PATCH v2 1/1 ARM: dts: add minimal DT support for DevKit8000
DevKit8000 is a beagle board clone from Timll, sold by armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D, S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and JTAG interface.
This patch adds the basic DT support for devkit8000. At this time, Information of twl4030, MMC1, I2C1, leds and there pim mux information are added.
---
-This patch is based on top of kernel 3.8-rc5.
-Tested on Devkit8000.
For V2:
-Change model name as "TimLL OMAP3 Devkit8000"
-Change compatible as "timll,omap3-devkit8000"
-Doing i2c1 pinmux default with pinctrl-single driver instead of i2c1
driver probe time.
:100644 100644 5ebb44f... 22ebc76... M arch/arm/boot/dts/Makefile
:000000 100644 0000000... dc59272... A arch/arm/boot/dts/omap3-devkit8000.dts
:100644 100644 53cb380b.. ccecb76... M arch/arm/mach-omap2/board-generic.c
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-devkit8000.dts | 126 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/board-generic.c | 1 + 3 files changed, 128 insertions(+), 0 deletions(-)
arch/arm/boot/dts/Makefile +1 -0
@@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ + omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \
arch/arm/boot/dts/omap3-devkit8000.dts new file +126 -0
126 lines not on this page · raw message
arch/arm/mach-omap2/board-generic.c +1 -0
@@ -110,6 +110,7 @@ MACHINE_ENDstatic const char *omap3_gp_boards_compat[]__initdata = {"ti,omap3-beagle" , +"timll,omap3-devkit8000" ,NULL , };
Signature · 1 line
1.7.0.4