ARM i.MX6: Add support for SabreSD board
Subsystems (4)
PATCH v2 1/1 ARM i.MX6: Add support for SabreSD board
---
Changes since V1:
- rebased on latest master with arm-entry changes
- use phy_register_fixup_for_uid to register phy fixup
- register SD4 as first mmc device, so it always becomes disk0
- add self and env partition
- GbE is working with patch 'net fec_imx: add support for i.MX6 1000Mbps mode'
arch/arm/Makefile | 1 + arch/arm/boards/freescale-mx6-sabresd/Makefile | 4 + arch/arm/boards/freescale-mx6-sabresd/board.c | 244 +++++++++++++++++++++ arch/arm/boards/freescale-mx6-sabresd/config.h | 4 + .../freescale-mx6-sabresd/env/init/config-board | 7 + .../boards/freescale-mx6-sabresd/flash_header.c | 178 +++++++++++++++ arch/arm/boards/freescale-mx6-sabresd/lowlevel.c | 10 + arch/arm/configs/freescale-mx6-sabresd_defconfig | 71 ++++++ arch/arm/mach-imx/Kconfig | 5 + 9 files changed, 524 insertions(+) create mode 100644 arch/arm/boards/freescale-mx6-sabresd/Makefile create mode 100644 arch/arm/boards/freescale-mx6-sabresd/board.c create mode 100644 arch/arm/boards/freescale-mx6-sabresd/config.h create mode 100644 arch/arm/boards/freescale-mx6-sabresd/env/init/config-board create mode 100644 arch/arm/boards/freescale-mx6-sabresd/flash_header.c create mode 100644 arch/arm/boards/freescale-mx6-sabresd/lowlevel.c create mode 100644 arch/arm/configs/freescale-mx6-sabresd_defconfig
arch/arm/Makefile +1 -0
@@ -157,6 +157,7 @@ board-$(CONFIG_MACH_SABRELITE) := freescale-mx6-sabrelite board-$(CONFIG_MACH_TX53) := karo-tx53 board-$(CONFIG_MACH_GUF_VINCELL) := guf-vincell board-$(CONFIG_MACH_EFIKA_MX_SMARTBOOK) := efika-mx-smartbook +board-$(CONFIG_MACH_SABRESD) := freescale-mx6-sabresd machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
arch/arm/boards/freescale-mx6-sabresd/Makefile new file +4 -0
@@ -0,0 +1,4 @@ +obj-y += board.o flash_header.o +pbl-y += flash_header.o +obj-y += lowlevel.o +pbl-y += lowlevel.o
arch/arm/boards/freescale-mx6-sabresd/board.c new file +244 -0
244 lines not on this page · raw message
arch/arm/boards/freescale-mx6-sabresd/config.h new file +4 -0
@@ -0,0 +1,4 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#endif /* __CONFIG_H */
arch/arm/boards/freescale-mx6-sabresd/env/init/config-board new file +7 -0
@@ -0,0 +1,7 @@ +#!/bin/sh + +# board defaults, do not change in running system. Change /env/config +# instead + +global.hostname=SabreSD +global.linux.bootargs.base="console=ttymxc0,115200"
arch/arm/boards/freescale-mx6-sabresd/flash_header.c new file +178 -0
178 lines not on this page · raw message
arch/arm/boards/freescale-mx6-sabresd/lowlevel.c new file +10 -0
@@ -0,0 +1,10 @@ +#include <common.h> +#include <sizes.h> +#include <asm/barebox-arm-head.h> +#include <asm/barebox-arm.h> + +void __naked barebox_arm_reset_vector (void ) +{ +arm_cpu_lowlevel_init (); +barebox_arm_entry (0x10000000 ,SZ_1G ,0 ); +}
arch/arm/configs/freescale-mx6-sabresd_defconfig new file +71 -0
71 lines not on this page · raw message
arch/arm/mach-imx/Kconfig +5 -0
@@ -30,6 +30,7 @@ config ARCH_TEXT_BASE default 0x8fe00000 if MACH_TX53 default 0x7fc00000 if MACH_GUF_VINCELL default 0x97f00000 if MACH_EFIKA_MX_SMARTBOOK + default 0x17800000 if MACH_SABRESD config BOARDINFO default "Eukrea CPUIMX25" if MACH_EUKREA_CPUIMX25
@@ -59,6 +60,7 @@ config BOARDINFO default "Sabre Lite" if MACH_SABRELITE default "Ka-Ro tx53" if MACH_TX53 default "Garz+Fricke Vincell" if MACH_GUF_VINCELL + default "SabreSD" if MACH_SABRESD choice prompt "Select boot mode"
@@ -489,6 +491,9 @@ config MACH_MX6Q_ARM2 config MACH_SABRELITE bool "Freescale i.MX6 Sabre Lite" +config MACH_SABRESD + bool "Freescale i.MX6 SabreSD" + endchoice endif
Signature · 7 lines
1.8.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
maintainerHi Hubert,
Quoted 11 lines · Hubert Feurstein
Cc Sascha Hauer <[email protected]>Cc Steffen Trumtrar <[email protected]>Signed-off-by Hubert Feurstein <[email protected]>---
Changes since V1:
- rebased on latest master with arm-entry changes
- usephy_register_fixup_for_uidto register phy fixup
- register SD4 as first mmc device, so it always becomes disk0
- add self and env partition
- GbE is working with patch 'netfec_imx: add support for i.MX6 1000Mbps mode'
Applied thanks.
arch/arm/boards/freescale-mx6-sabresd/board.c line 136
Quoted 8 lines
arch/arm/boards/freescale-mx6-sabresd/board.c new file +8
-0+ +static int sabresd_mem_init (void ) +{ +arm_add_mem_device ("ram0" ,0x10000000 ,SZ_1G ); + +return 0 ; +} +mem_initcall (sabresd_mem_init);
This is not necessary anymore. I removed this while applying. Could you verify this still works?
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi Sascha,
2013/2/11 Sascha Hauer <[email protected]>:
[...]
Quoted 11 lines
arch/arm/boards/freescale-mx6-sabresd/board.c line 136
Quoted 8 lines
arch/arm/boards/freescale-mx6-sabresd/board.c new file +8
-0+ +static int sabresd_mem_init (void ) +{ +arm_add_mem_device ("ram0" ,0x10000000 ,SZ_1G ); + +return 0 ; +} +mem_initcall (sabresd_mem_init);This is not necessary anymore. I removed this while applying. Could you verify this still works?
No, it does not. Here's the log:
barebox 2013.02.0-00270-g4bb21a7 #158 Tue Feb 12 09:34:12 CET 2013
Board: SabreSD
mmu: Error: Can't request SDRAM region for ttb
Error: Cannot request SDRAM region for stack
registered netconsole as cs1
imx-esdhc imx-esdhc3: registered as imx-esdhc3
detected card version 4.0
mci mci0: registered disk0
mci mci0: No partition table found
imx-esdhc imx-esdhc1: registered as imx-esdhc1
mci mci1: no card inserted
imx-esdhc imx-esdhc2: registered as imx-esdhc2
mci mci2: registered disk1
mci mci2: No partition table found
BUG: failure at arch/arm/cpu/mmu.c:122/find_pte()!
BUG!
[<1781bd3d>] (unwind_backtrace+0x1/0x64) from [<1780fffd>] (panic+0x1d/0x2c) [<1780fffd>] (panic+0x1d/0x2c) from [<1781c7f5>] (remap_range+0x29/0x88) [<1781c7f5>] (remap_range+0x29/0x88) from [<1781c8a3>] (dma_alloc_coherent+0x2f/0x38)
[<1781c8a3>] (dma_alloc_coherent+0x2f/0x38) from [<178084c3>] (fec_probe+0x8f/0x17c)
[<178084c3>] (fec_probe+0x8f/0x17c) from [<17807d81>] (platform_probe+0x9/0xa) [<17807d81>] (platform_probe+0x9/0xa) from [<17807ba7>] (device_probe+0xb/0x38) [<17807ba7>] (device_probe+0xb/0x38) from [<17807bf3>] (match+0x1f/0x30) [<17807bf3>] (match+0x1f/0x30) from [<17807d05>] (register_device+0x81/0xb0) [<17807d05>] (register_device+0x81/0xb0) from [<17807e11>] (add_generic_device_res+0x2d/0x32)
[<17807e11>] (add_generic_device_res+0x2d/0x32) from [<1781acbb>] (imx_add_fec_imx6+0x1f/0x28)
[<1781acbb>] (imx_add_fec_imx6+0x1f/0x28) from [<178197e9>] (sabresd_devices_init+0x81/0x10c)
[<178197e9>] (sabresd_devices_init+0x81/0x10c) from [<178068d9>] (start_barebox+0x15/0xc0)
[<178068d9>] (start_barebox+0x15/0xc0) from [<1781c237>] (__start.isra.0+0x4b/0x54)
[<1781c237>] (__start.isra.0+0x4b/0x54) from [<1781c24d>] (setup_c+0x1/0x48)
Hubert
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
maintainerQuoted 15 lines · Hubert Feurstein
Hi Sascha,
2013/2/11 Sascha Hauer <[email protected]>:
[...]Quoted 11 lines
arch/arm/boards/freescale-mx6-sabresd/board.c line 136
Quoted 8 lines
arch/arm/boards/freescale-mx6-sabresd/board.c new file +8
-0+ +static int sabresd_mem_init (void ) +{ +arm_add_mem_device ("ram0" ,0x10000000 ,SZ_1G ); + +return 0 ; +} +mem_initcall (sabresd_mem_init);This is not necessary anymore. I removed this while applying. Could you verify this still works?
Quoted 1 line
No, it does not. Here's the log:
Ah, damn, there is no SDRAM size detection for i.MX6 (yet). I forgot about this. I'll revert this to your original patch then.
Sascha
Quoted 43 lines
barebox 2013.02.0-00270-g4bb21a7 #158 Tue Feb 12 09:34:12 CET 2013
Board: SabreSD
mmu: Error: Can't request SDRAM region for ttb
Error: Cannot request SDRAM region for stack
registered netconsole as cs1
imx-esdhc imx-esdhc3: registered as imx-esdhc3
detected card version 4.0
mci mci0: registered disk0
mci mci0: No partition table found
imx-esdhc imx-esdhc1: registered as imx-esdhc1
mci mci1: no card inserted
imx-esdhc imx-esdhc2: registered as imx-esdhc2
mci mci2: registered disk1
mci mci2: No partition table foundBUG: failure at arch/arm/cpu/mmu.c:122/find_pte()!BUG!
[<1781bd3d>] (unwind_backtrace+0x1/0x64) from [<1780fffd>] (panic+0x1d/0x2c) [<1780fffd>] (panic+0x1d/0x2c) from [<1781c7f5>] (remap_range+0x29/0x88) [<1781c7f5>] (remap_range+0x29/0x88) from [<1781c8a3>] (dma_alloc_coherent+0x2f/0x38)
[<1781c8a3>] (dma_alloc_coherent+0x2f/0x38) from [<178084c3>] (fec_probe+0x8f/0x17c)
[<178084c3>] (fec_probe+0x8f/0x17c) from [<17807d81>] (platform_probe+0x9/0xa) [<17807d81>] (platform_probe+0x9/0xa) from [<17807ba7>] (device_probe+0xb/0x38) [<17807ba7>] (device_probe+0xb/0x38) from [<17807bf3>] (match+0x1f/0x30) [<17807bf3>] (match+0x1f/0x30) from [<17807d05>] (register_device+0x81/0xb0) [<17807d05>] (register_device+0x81/0xb0) from [<17807e11>] (add_generic_device_res+0x2d/0x32)
[<17807e11>] (add_generic_device_res+0x2d/0x32) from [<1781acbb>] (imx_add_fec_imx6+0x1f/0x28)
[<1781acbb>] (imx_add_fec_imx6+0x1f/0x28) from [<178197e9>] (sabresd_devices_init+0x81/0x10c)
[<178197e9>] (sabresd_devices_init+0x81/0x10c) from [<178068d9>] (start_barebox+0x15/0xc0)
[<178068d9>] (start_barebox+0x15/0xc0) from [<1781c237>] (__start.isra.0+0x4b/0x54)
[<1781c237>] (__start.isra.0+0x4b/0x54) from [<1781c24d>] (setup_c+0x1/0x48)Hubert
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox