Summary of last patches submitted
Subsystems (2)
cover Summary of last patches submitted
Here are the last two patches I've submitted.
The first is a straightforward solution to a regression.
The second was first intended to provide devicetree support for booting an omap4 based tablet. I've achieved booting it successfully, but after several tries at bringing the mmc controller working I've realised that the Linux kernel still has no support for devicetree on omap4 (it's almost there, but it lacks dma configuration).
For more information see:
http://omappedia.org/wiki/Device_Tree#Drivers_.2F_Features_migration_status
So the second patch has been stripped and only provides generic support, nothing related to the tablet.
The patches also include the changes reflecting the received feedback, thanks!
Vicente Bergas (2):
ArchosG9: solve regression in second stage lowlevel init
DeviceTree: add support for initrd in the DT
arch/arm/boards/archosg9/lowlevel.c | 7 ++-- arch/arm/lib/armlinux.c | 2 ++ common/oftree.c | 66 +++++++++++++++++++++++++++++++++++++ include/of.h | 8 +++++ 4 files changed, 81 insertions(+), 2 deletions(-)
Signature · 7 lines
1.8.1.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 1/2 ArchosG9: solve regression in second stage lowlevel init
On ArchosG9 the second stage low-level init was the fallback default. Now that the low-level init is forcibly enabled it has to be skipped when already executed from first stage.
--- arch/arm/boards/archosg9/lowlevel.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
arch/arm/boards/archosg9/lowlevel.c +5 -2
@@ -63,15 +63,18 @@ static noinline void archosg9_init_lowlevel(void)omap4_configure_usb_dpll (&usb);omap4_ddr_init (&ddr_regs_400_mhz_2cs, &core); - -barebox_arm_entry (0x80000000 ,SZ_1G ,0 ); } void __naked __bare_init barebox_arm_reset_vector(void) {arm_cpu_lowlevel_init (); +if (get_pc () >0x80000000 ) + goto out; +arm_setup_stack (0x4030d000 );archosg9_init_lowlevel (); +out: +barebox_arm_entry (0x80000000 ,SZ_1G ,0 ); }
Signature · 7 lines
1.8.1.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/2 DeviceTree: add support for initrd in the DT
In reply to Vicente BergasAdd the initrd start and end address to the DT, code comes from u-boot.
--- arch/arm/lib/armlinux.c | 2 ++ common/oftree.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++ include/of.h | 8 ++++++ 3 files changed, 76 insertions(+)
arch/arm/lib/armlinux.c +2 -0
@@ -266,6 +266,8 @@ void start_linux(void *adr, int swap, unsigned long initrd_address,if (oftree) {printf ("booting Linux kernel with devicetree\n" ); +fdt_initrd (oftree, initrd_address, + initrd_address + initrd_size,1 ); params = oftree; }else {setup_tags (initrd_address, initrd_size, swap);
common/oftree.c +66 -0
72 lines not on this page · raw message
include/of.h +8 -0
@@ -18,6 +18,14 @@ void do_fixup_by_path(struct fdt_header *fdt, const char *path, const char *propvoid do_fixup_by_path_u32 (struct fdt_header *fdt,const char *path,const char *prop,u32 val,int create);int fdt_get_path_or_create (struct fdt_header *fdt,const char *path); +#ifdef CONFIG_FDT +int fdt_initrd (void *fdt,ulong initrd_start,ulong initrd_end,int force); +#else +static inline int fdt_initrd (void *fdt,ulong start,ulong end,int force) +{ +return 0 ; +} +#endif #define OF_BAD_ADDR ((u64)-1)
Signature · 7 lines
1.8.1.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
AppliedQuoted 12 lines · Vicente Bergas
Here are the last two patches I've submitted.
The first is a straightforward solution to a regression.
The second was first intended to provide devicetree support for booting an omap4 based tablet. I've achieved booting it successfully, but after several tries at bringing the mmc controller working I've realised that the Linux kernel still has no support for devicetree on omap4 (it's almost there, but it lacks dma configuration).
For more information see:
http://omappedia.org/wiki/Device_Tree#Drivers_.2F_Features_migration_status
So the second patch has been stripped and only provides generic support, nothing related to the tablet.
Quoted 5 lines
The patches also include the changes reflecting the received feedback, thanks!
Vicente Bergas (2):
ArchosG9: solve regression in second stage lowlevel init
DeviceTree: add support for initrd in the DT
Applied, thanks
Sascha
Quoted 16 lines
arch/arm/boards/archosg9/lowlevel.c | 7 ++-- arch/arm/lib/armlinux.c | 2 ++ common/oftree.c | 66 +++++++++++++++++++++++++++++++++++++ include/of.h | 8 +++++ 4 files changed, 81 insertions(+), 2 deletions(-)Signature · 7 lines
1.8.1.3 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox