Skip to contentSkip to conversation

HID: i2c-hid: implement request() callback

PATCH New Benjamin Tissoires 1 participant 1 message Feb 12, 2013 HID

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 HID: i2c-hid: implement request() callback

This allows HID drivers to also get/set reports through hid_hw_request().

---

Hi guys,

this one also goes on top of the cleanup of usbhid from hid drivers. The purpose is to make hid-sensor-hub independent from USB and usable with I2C.

Cheers,
Benjamin

 drivers/hid/i2c-hid/i2c-hid.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
drivers/hid/i2c-hid/i2c-hid.c +32 -0
index ec79302..935f387 100644
@@ -563,6 +563,37 @@ static int i2c_hid_output_raw_report(struct hid_device *hid, __u8 *buf,
 	return ret;
 }
 
+static void i2c_hid_request(struct hid_device *hid, struct hid_report *rep,
+		int reqtype)
+{
+	struct i2c_client *client = hid->driver_data;
+	struct i2c_hid *ihid = i2c_get_clientdata(client);
+	char *buf;
+	int ret;
+
+	buf = kzalloc(ihid->bufsize, GFP_KERNEL);
+	if (!buf)
+		return;
+
+	switch (reqtype) {
+	case HID_REQ_GET_REPORT:
+		ret = i2c_hid_get_raw_report(hid, rep->id, buf, ihid->bufsize,
+					     rep->type);
+		if (ret < 0)
+			dev_err(&client->dev, "%s: unable to get report: %d\n",
+				__func__, ret);
+		else
+			hid_input_report(hid, rep->type, buf, ret, 0);
+		break;
+	case HID_REQ_SET_REPORT:
+		hid_output_report(rep, buf);
+		i2c_hid_output_raw_report(hid, buf, ihid->bufsize, rep->type);
+		break;
+	}
+
+	kfree(buf);
+}
+
 static int i2c_hid_parse(struct hid_device *hid)
 {
 	struct i2c_client *client = hid->driver_data;
@@ -742,6 +773,7 @@ static struct hid_ll_driver i2c_hid_ll_driver = {
 	.open = i2c_hid_open,
 	.close = i2c_hid_close,
 	.power = i2c_hid_power,
+	.request = i2c_hid_request,
 	.hidinput_input_event = i2c_hid_hidinput_input_event,
 };
 
Signature · 1 line
1.8.1.2