Skip to contentSkip to conversation

ARM: Fix up l2x0_init log message

PATCH New Sherman Yin 1 participant 2 messages Feb 13, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: Fix up l2x0_init log message

At the end of the function l2x0_init(), printk displays the ?ways? and ?l2x0_size? variables, but these are calculated based on the aux_val parameter, instead of the actual value in the aux register.

I think a better way is to leave the ?ways?, ?way_size? and ?l2x0_size? derivation until after the following lines:

         /* Re-read it in case some bits are reserved. */
         aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);

Then we will be reporting based on what the hardware tells us, instead of the function argument. Below is a proposed patch, although I'm not entirely happy with the repeated switch statement.

Or is there a reason why we want to print the values derived from aux_val instead?

Sherman Yin (1):
ARM: Fix up l2x0_init log message

 arch/arm/mm/cache-l2x0.c |   39 +++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 ARM: Fix up l2x0_init log message

The log at the end of l2x0_init() should print L2 cache info based on current register value instead of function argument.

---
 arch/arm/mm/cache-l2x0.c |   39 +++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)
arch/arm/mm/cache-l2x0.c +31 -8
index c2f3739..011a584 100644
@@ -377,14 +377,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	l2x0_way_mask = (1 << ways) - 1;
 
 	/*
-	 * L2 cache Size =  Way size * Number of ways
-	 */
-	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
-	way_size = 1 << (way_size + way_size_shift);
-
-	l2x0_size = ways * way_size * SZ_1K;
-
-	/*
 	 * Check if l2x0 controller is already enabled.
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
@@ -418,6 +410,37 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		outer_cache.disable = l2x0_disable;
 	}
 
+	/* Update number of ways based on aux ctrl register value */
+	switch (cache_id) {
+	case L2X0_CACHE_ID_PART_L310:
+		if (aux & (1 << 16))
+			ways = 16;
+		else
+			ways = 8;
+		break;
+	case L2X0_CACHE_ID_PART_L210:
+		ways = (aux >> 13) & 0xf;
+		break;
+
+	case AURORA_CACHE_ID:
+		ways = (aux >> 13) & 0xf;
+		ways = 2 << ((ways + 1) >> 2);
+		way_size_shift = AURORA_WAY_SIZE_SHIFT;
+		break;
+	default:
+		/* Assume unknown chips have 8 ways */
+		ways = 8;
+		break;
+	}
+
+	/*
+	 * L2 cache Size =  Way size * Number of ways
+	 */
+	way_size = (aux & L2X0_AUX_CTRL_WAY_SIZE_MASK) >> 17;
+	way_size = 1 << (way_size + way_size_shift);
+
+	l2x0_size = ways * way_size * SZ_1K;
+
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
 			ways, cache_id, aux, l2x0_size);
Signature · 1 line
1.7.9.5