i2c-i801: Add Device IDs for Intel Wellsburg PCH
Subsystems (3)
PATCH v3 1/1 i2c-i801: Add Device IDs for Intel Wellsburg PCH
This patch adds the SMBus Device IDs for the Intel Wellsburg PCH
---
Change notes for v3:
*The additional Device IDs added in v2 are for the SMBus MS Unit and are referred to as SMBus_MS*. These devices are similar to the Patsburg IDF in functionality, however they are referred to as MS Unit devices in the External Design Specification.
Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+), 0 deletions(-)
Documentation/i2c/busses/i2c-i801 +1 -0
@@ -23,6 +23,7 @@ Supported adapters: * Intel Lynx Point (PCH) * Intel Lynx Point-LP (PCH) * Intel Avoton (SOC) + * Intel Wellsburg (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller
drivers/i2c/busses/Kconfig +1 -0
@@ -107,6 +107,7 @@ config I2C_I801 Lynx Point (PCH) Lynx Point-LP (PCH) Avoton (SOC) + Wellsburg (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801.
drivers/i2c/busses/i2c-i801.c +15 -0
@@ -54,6 +54,10 @@ Lynx Point (PCH) 0x8c22 32 hard yes yes yes Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes Avoton (SOC) 0x1f3c 32 hard yes yes yes + Wellsburg (PCH) 0x8d22 32 hard yes yes yes + Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes + Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes + Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes Features supported by this driver: Software PEC no
@@ -167,6 +171,10 @@#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22 +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e +#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22struct i801_mux_config {
@@ -801,6 +809,10 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) }, { 0, } };
@@ -1106,6 +1118,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 :case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 :case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 : +case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 : +case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 : +case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 : priv->features |=FEATURE_IDF ;/* fall through */ default :
Signature · 1 line
1.7.7.6
Quoted 7 lines · James Ralston
This patch adds the SMBus Device IDs for the Intel Wellsburg PCH
Signed-off-by James Ralston <[email protected]>---
Change notes for v3:
*The additional Device IDs added in v2 are for the SMBus MS Unit and are referred to as SMBus_MS*. These devices are similar to the Patsburg IDF in functionality, however they are referred to as MS Unit devices in the External Design Specification.
Quoted 5 lines
Documentation/i2c/busses/i2c-i801 | 1 + drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-i801.c | 15 +++++++++++++++ 3 files changed, 17 insertions(+), 0 deletions(-)(...)
Perfect, thanks James.
Signature · 1 line
Jean Delvare