Skip to contentSkip to conversation

ieee802154: at86rf230: Remove empty suspend/resume callbacks

PATCH Applied Lars-Peter Clausen 2 participants 2 messages Feb 15, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ieee802154: at86rf230: Remove empty suspend/resume callbacks

There is no need to implement empty suspend/resume callbacks if there is nothing to do during suspend/resume. The drivers will behave the same with no callbacks or empty callbacks during suspend/resume.

---
 drivers/net/ieee802154/at86rf230.c | 12 ------------
 1 file changed, 12 deletions(-)
drivers/net/ieee802154/at86rf230.c +0 -12
index a4a62e1..fc1687e 100644
@@ -751,16 +751,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 	return 0;
 }
 
-static int at86rf230_suspend(struct spi_device *spi, pm_message_t message)
-{
-	return 0;
-}
-
-static int at86rf230_resume(struct spi_device *spi)
-{
-	return 0;
-}
-
 static int at86rf230_fill_data(struct spi_device *spi)
 {
 	struct at86rf230_local *lp = spi_get_drvdata(spi);
@@ -948,8 +938,6 @@ static struct spi_driver at86rf230_driver = {
 	},
 	.probe      = at86rf230_probe,
 	.remove     = at86rf230_remove,
-	.suspend    = at86rf230_suspend,
-	.resume     = at86rf230_resume,
 };
 
 module_spi_driver(at86rf230_driver);
Signature · 1 line
1.8.0
maintainer Applied
#1 lore raw

From: Lars-Peter Clausen <[email protected]>
Date: Fri, 15 Feb 2013 14:03:29 +0100

Quoted 5 lines

There is no need to implement empty suspend/resume callbacks if there is nothing to do during suspend/resume. The drivers will behave the same with no callbacks or empty callbacks during suspend/resume.

Applied.