Skip to contentSkip to conversation

timing issue - uboot freeze after pringing header

U-Boot John Stile 2 participants 3 messages Feb 15, 2013 – Feb 19, 2013

lore
Share & tools
lore

John Stile

author
#0 lore raw

I am trying to move from uboot-1.3.6 to uboot 2013.01, where the old works, the new prints this before freezing:

        U-Boot 2013.01 (Feb 14 2013 - 16:24:13)
        
        CPU: AT91SAM9G20
        Crystal frequency:   18.432 MHz
        CPU clock        :  396.288 MHz
        Master clock     :  132.096 MHz

My board is the at91sam9g20ek_2mmc.
at91bootstrap-1.1.6 loads uboot.

I am trying both nandflash and dataflash versions, using include/configs/at91sam9260ek.h

Messing with settings I have got it back to a state of not printing anything.

#1 lore raw

Hi John,

Quoted 10 lines · John Stile

I am trying to move from uboot-1.3.6 to uboot 2013.01, where the old works, the new prints this before freezing:

         U-Boot 2013.01 (Feb 14 2013 - 16:24:13)

         CPU: AT91SAM9G20
         Crystal frequency:   18.432 MHz
         CPU clock        :  396.288 MHz
         Master clock     :  132.096 MHz
Quoted 2 lines

My board is the at91sam9g20ek_2mmc.
at91bootstrap-1.1.6 loads uboot.

Please update the at91bootstrap to new version.
You can get the it from: git://github.com/linux4sam/at91bootstrap.git
using tag: v3.5.2
or master branch

For new bootstrap, the memory map for NAND flash has changed. More information:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory

So, you need flash u-boot to 0x40000 address, and change u-boot env as the memory map (I will send patches for this later).

Best Regards,
Bo Shen

Quoted 10 lines

I am trying both nandflash and dataflash versions, using include/configs/at91sam9260ek.h

Messing with settings I have got it back to a state of not printing anything.

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

author
#2 lore raw

Hello Bo Shen,

Quoted 25 lines · Bo Shen

Hi John,

Quoted 10 lines · John Stile

I am trying to move from uboot-1.3.6 to uboot 2013.01, where the old works, the new prints this before freezing:

         U-Boot 2013.01 (Feb 14 2013 - 16:24:13)

         CPU: AT91SAM9G20
         Crystal frequency:   18.432 MHz
         CPU clock        :  396.288 MHz
         Master clock     :  132.096 MHz
Quoted 2 lines

My board is the at91sam9g20ek_2mmc.
at91bootstrap-1.1.6 loads uboot.

Please update the at91bootstrap to new version.
You can get the it from: git://github.com/linux4sam/at91bootstrap.git
using tag: v3.5.2
or master branch

For new bootstrap, the memory map for NAND flash has changed. More information:
http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted#Linux4SAM_NandFlash_demo_Memory

Quoted 11 lines

So, you need flash u-boot to 0x40000 address, and change u-boot env as the memory map (I will send patches for this later).

Best Regards,
Bo Shen

Quoted 5 lines

I am trying both nandflash and dataflash versions, using include/configs/at91sam9260ek.h

Messing with settings I have got it back to a state of not printing anything.

I was wrong. it isn't a timing issue.
In at91boostrap, I specified the wrong IMG_SIZE, and specifying the correct size solved the problem. I had only copied part of the binary to SDRAM, which lead to the program sometimes showing the initial banner before crashing.

In my situation, I use buildroot-2011.11, which downloads at91boostrap
from: ftp://www.at91.com/pub/at91bootstrap/ version AT91Bootstrap1.16.zip, and though updates are the available I have modified my st91boostrap and uboot, so upgrades are not so simple.