Skip to contentSkip to conversation

highbank: add power off support

PATCH Applied Jean-Christophe PLAGNIOL-VILLARD 3 participants 3 messages Feb 16, 2013 – Feb 18, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 highbank: add power off support

---
 arch/arm/Kconfig                    |    1 +
 arch/arm/configs/highbank_defconfig |    1 +
 arch/arm/mach-highbank/reset.c      |    8 ++++++++
 3 files changed, 10 insertions(+)
arch/arm/Kconfig +1 -0
index f002910..7ac134e 100644
@@ -49,6 +49,7 @@ config ARCH_EP93XX
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
 	select HAS_DEBUG_LL
+	select HAS_POWEROFF
 	select ARCH_HAS_L2X0
 	select CPU_V7
 	select ARM_AMBA
arch/arm/configs/highbank_defconfig +1 -0
index 31ac954..b034ed1 100644
@@ -35,6 +35,7 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_UIMAGE=y
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_OFTREE_PROBE=y
arch/arm/mach-highbank/reset.c +8 -0
index 41418b2..630672a 100644
@@ -17,3 +17,11 @@ void __noreturn reset_cpu(ulong addr)
 
 	while(1);
 }
+
+void __noreturn poweroff()
+{
+	shutdown_barebox();
+
+	hingbank_set_pwr_shutdown();
+	while(1);
+}
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 2 lines · Jean-Christophe PLAGNIOL-VILLARD

Applied, thanks

Sascha

Quoted 55 lines
---
 arch/arm/Kconfig                    |    1 +
 arch/arm/configs/highbank_defconfig |    1 +
 arch/arm/mach-highbank/reset.c      |    8 ++++++++
 3 files changed, 10 insertions(+)
arch/arm/Kconfig +1 -0
index f002910..7ac134e 100644
@@ -49,6 +49,7 @@ config ARCH_EP93XX
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
 	select HAS_DEBUG_LL
+	select HAS_POWEROFF
 	select ARCH_HAS_L2X0
 	select CPU_V7
 	select ARM_AMBA
arch/arm/configs/highbank_defconfig +1 -0
index 31ac954..b034ed1 100644
@@ -35,6 +35,7 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_UIMAGE=y
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_OFTREE_PROBE=y
arch/arm/mach-highbank/reset.c +8 -0
index 41418b2..630672a 100644
@@ -17,3 +17,11 @@ void __noreturn reset_cpu(ulong addr)
 
 	while(1);
 }
+
+void __noreturn poweroff()
+{
+	shutdown_barebox();
+
+	hingbank_set_pwr_shutdown();
+	while(1);
+}
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw
In reply to Jean-Christophe PLAGNIOL-VILLARD
Quoted 37 lines · Jean-Christophe PLAGNIOL-VILLARD
---
 arch/arm/Kconfig                    |    1 +
 arch/arm/configs/highbank_defconfig |    1 +
 arch/arm/mach-highbank/reset.c      |    8 ++++++++
 3 files changed, 10 insertions(+)
arch/arm/Kconfig +1 -0
index f002910..7ac134e 100644
@@ -49,6 +49,7 @@ config ARCH_EP93XX
 config ARCH_HIGHBANK
 	bool "Calxeda Highbank"
 	select HAS_DEBUG_LL
+	select HAS_POWEROFF
 	select ARCH_HAS_L2X0
 	select CPU_V7
 	select ARM_AMBA
arch/arm/configs/highbank_defconfig +1 -0
index 31ac954..b034ed1 100644
@@ -35,6 +35,7 @@ CONFIG_CMD_BOOTM_OFTREE_UIMAGE=y
 CONFIG_CMD_UIMAGE=y
 # CONFIG_CMD_BOOTU is not set
 CONFIG_CMD_RESET=y
+CONFIG_CMD_POWEROFF=y
 CONFIG_CMD_GO=y
 CONFIG_CMD_OFTREE=y
 CONFIG_CMD_OFTREE_PROBE=y
arch/arm/mach-highbank/reset.c +0 -0
index 41418b2..630672a 100644

arch/arm/mach-highbank/reset.c void __noreturn reset_cpu(ulong addr) · line 26

Quoted 10 lines
arch/arm/mach-highbank/reset.c +7 -0
@@ -17,3 +17,11 @@ void __noreturn reset_cpu(ulong addr)
 
 	while(1);
 }
+
+void __noreturn poweroff()
+{
+	shutdown_barebox();
+
+	hingbank_set_pwr_shutdown();
+	while(1);

This needs a wfi to trigger poweroff.

Rob

arch/arm/mach-highbank/reset.c void __noreturn reset_cpu(ulong addr) · line 27

Quoted 2 lines
arch/arm/mach-highbank/reset.c +1 -0
+}

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox