Input: ALPS - Remove unused argument to alps_enter_command_mode()
Subsystems (3)
PATCH 1/3 Input: ALPS - Remove unused argument to alps_enter_command_mode()
Now that alps_identify() explicitly issues an EC report using alps_rpt_cmd(), we no longer need to look at the magic numbers returned by alps_enter_command_mode().
--- drivers/input/mouse/alps.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
Baseline for this series:git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git next
drivers/input/mouse/alps.c +7 -11
@@ -994,8 +994,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command,return 0 ; } -static int alps_enter_command_mode (struct psmouse *psmouse, -unsigned char *resp) +static int alps_enter_command_mode (struct psmouse *psmouse) {unsigned char param[4 ];
@@ -1009,9 +1008,6 @@ static int alps_enter_command_mode(struct psmouse *psmouse, "unknown response while entering command mode\n");return -1 ; } - -if (resp) - *resp = param[2 ];return 0 ; }
@@ -1176,7 +1172,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse, {int reg_val, ret =-1 ; -if (alps_enter_command_mode (psmouse,NULL )) +if (alps_enter_command_mode (psmouse))return -1 ; reg_val =alps_command_mode_read_reg (psmouse, reg_base +0x0008 );
@@ -1216,7 +1212,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) {int ret = -EIO , reg_val; -if (alps_enter_command_mode (psmouse,NULL )) +if (alps_enter_command_mode (psmouse)) goto error; reg_val =alps_command_mode_read_reg (psmouse, reg_base +0x08 );
@@ -1279,7 +1275,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)* supported by this driver. If bit 1 isn't set the packet * format is different. */ -if (alps_enter_command_mode (psmouse,NULL ) || +if (alps_enter_command_mode (psmouse) ||alps_command_mode_write_reg (psmouse, reg_base +0x08 ,0x82 ) ||alps_exit_command_mode (psmouse))
@@ -1306,7 +1302,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse) alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) goto error; -if (alps_enter_command_mode (psmouse,NULL ) || +if (alps_enter_command_mode (psmouse) ||alps_absolute_mode_v3 (psmouse)) {psmouse_err (psmouse,"Failed to enter absolute mode\n" ); goto error;
@@ -1381,7 +1377,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) priv->flags &= ~ALPS_DUALPOINT ; } -if (alps_enter_command_mode (psmouse,NULL ) || +if (alps_enter_command_mode (psmouse) ||alps_command_mode_read_reg (psmouse,0xc2d9 ) ==-1 ||alps_command_mode_write_reg (psmouse,0xc2cb ,0x00 )) goto error;
@@ -1431,7 +1427,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse)struct ps2dev *ps2dev = &psmouse->ps2dev;unsigned char param[4 ]; -if (alps_enter_command_mode (psmouse,NULL )) +if (alps_enter_command_mode (psmouse)) goto error;if (alps_absolute_mode_v4 (psmouse)) {
Signature · 1 line
1.7.10.4
PATCH 2/3 Input: ALPS - Add "Dolphin V1" touchpad support
From: Dave Turvene <[email protected]>
These touchpads use a different protocol; they have been seen on Dell N5110, Dell 17R SE, and others.
The official ALPS driver identifies them by looking for an exact match on the E7 report: 73 03 50. Dolphin V1 returns an EC report of 73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of 73 02 xx (02 has been seen).
Dolphin V2 probably needs a different initialization sequence and/or report parser, so it is left for a future commit.
--- drivers/input/mouse/alps.c | 67 ++++++++++++++++++++++++++++++++++++++++++-- drivers/input/mouse/alps.h | 1 + 2 files changed, 66 insertions(+), 2 deletions(-)
drivers/input/mouse/alps.c +65 -2
@@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) f->y_map |= (p[5 ] &0x20 ) <<6 ; } +static void alps_decode_dolphin (struct alps_fields *f,unsigned char *p) +{ + f->first_mp = !!(p[0 ] &0x02 ); + f->is_mp = !!(p[0 ] &0x20 ); + + f->fingers = ((p[0 ] &0x6 ) >>1 | + (p[0 ] &0x10 ) >>2 ); + f->x_map = ((p[2 ] &0x60 ) >>5 ) | + ((p[4 ] &0x7f ) <<2 ) | + ((p[5 ] &0x7f ) <<9 ) | + ((p[3 ] &0x07 ) <<16 ) | + ((p[3 ] &0x70 ) <<15 ) | + ((p[0 ] &0x01 ) <<22 ); + f->y_map = (p[1 ] &0x7f ) | + ((p[2 ] &0x1f ) <<7 ); + + f->x = ((p[1 ] &0x7f ) | ((p[4 ] &0x0f ) <<7 )); + f->y = ((p[2 ] &0x7f ) | ((p[4 ] &0xf0 ) <<3 )); + f->z = (p[0 ] &4 ) ?0 : p[5 ] &0x7f ; + +alps_decode_buttons_v3 (f, p); +} +static void alps_process_touchpad_packet_v3 (struct psmouse *psmouse) {struct alps_data *priv = psmouse->private;
@@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) }/* Bytes 2 - pktsize should have 0 in the highest bit */ -if (psmouse->pktcnt >=2 && psmouse->pktcnt <= psmouse->pktsize && +if (priv->proto_version !=ALPS_PROTO_V5 && + psmouse->pktcnt >=2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt -1 ] &0x80 )) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", psmouse->pktcnt - 1,
@@ -1003,7 +1027,8 @@ static int alps_enter_command_mode(struct psmouse *psmouse)return -1 ; } -if (param[0 ] !=0x88 || (param[1 ] !=0x07 && param[1 ] !=0x08 )) { +if ((param[0 ] !=0x88 || (param[1 ] !=0x07 && param[1 ] !=0x08 )) && + param[0 ] !=0x73 ) {psmouse_dbg (psmouse,"unknown response while entering command mode\n" );return -1 ;
@@ -1495,6 +1520,23 @@ error:return -1 ; } +static int alps_hw_init_dolphin_v1 (struct psmouse *psmouse) +{ +struct ps2dev *ps2dev = &psmouse->ps2dev; +unsigned char param[2 ]; + +/* This is dolphin "v1" as empirically defined by florin9doi */ + param[0 ] =0x64 ; + param[1 ] =0x28 ; + +if (ps2_command (ps2dev,NULL ,PSMOUSE_CMD_SETSTREAM ) || +ps2_command (ps2dev, ¶m[0 ],PSMOUSE_CMD_SETRATE ) || +ps2_command (ps2dev, ¶m[1 ],PSMOUSE_CMD_SETRATE )) +return -1 ; + +return 0 ; +} +static void alps_set_defaults (struct alps_data *priv) { priv->byte0 =0x8f ;
@@ -1528,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv) priv->nibble_commands = alps_v4_nibble_commands; priv->addr_command =PSMOUSE_CMD_DISABLE ;break ; +case ALPS_PROTO_V5 : + priv->hw_init = alps_hw_init_dolphin_v1; + priv->process_packet = alps_process_packet_v3; + priv->decode_fields = alps_decode_dolphin; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command =PSMOUSE_CMD_RESET_WRAP ; + priv->byte0 =0xc8 ; + priv->mask0 =0xc8 ; + priv->flags =0 ; + priv->x_max =1360 ; + priv->y_max =660 ; + priv->x_bits =23 ; + priv->y_bits =12 ; +break ; } }
@@ -1588,6 +1645,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)if (alps_match_table (psmouse, priv, e7, ec) ==0 ) {return 0 ; + }else if (e7[0 ] ==0x73 && e7[1 ] ==0x03 && e7[2 ] ==0x50 && + ec[0 ] ==0x73 && ec[1 ] ==0x01 ) { + priv->proto_version =ALPS_PROTO_V5 ; +alps_set_defaults (priv); + +return 0 ; }else if (ec[0 ] ==0x88 && ec[1 ] ==0x08 ) { priv->proto_version =ALPS_PROTO_V3 ;alps_set_defaults (priv);
drivers/input/mouse/alps.h +1 -0
@@ -16,6 +16,7 @@#define ALPS_PROTO_V2 2#define ALPS_PROTO_V3 3#define ALPS_PROTO_V4 4 +#define ALPS_PROTO_V5 5/** * struct alps_model_info - touchpad ID table
Signature · 1 line
1.7.10.4
PATCH 3/3 Input: ALPS - Add "Dolphin V2" touchpad support
In reply to Kevin CernekeeAnother ALPS variant; seen on the Fujitsu A512.
--- drivers/input/mouse/alps.c | 79 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 1 deletion(-)
This is a work-in-progress and not ready to be merged yet. See:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/606238
https://bugs.freedesktop.org/show_bug.cgi?id=59478
The init sequence is probably "mostly OK" but the pressure values read near the edges are not accurate, so edge scrolling does not work well. Maybe this is fixable by changing some of the register settings, maybe the report decoder is slightly off, or maybe the software will actually need to scale z based on the x/y values.
One thing that might be worth trying is to select the native V2 report format (short cmd 0x89) instead of the V1 format (short cmd 0x85). This probably affects the bit assignments and may require writing a new alps_decode_* function.
I don't actually have access to any of the "Dolphin" based systems, so I'm not able to make much progress on my own here. Hopefully it's a useful starting point though.
drivers/input/mouse/alps.c +78 -1
@@ -1520,6 +1520,17 @@ error:return -1 ; } +static int alps_short_cmd_v5 (struct psmouse *psmouse,u8 init_command,u8 cmd) +{ +struct ps2dev *ps2dev = &psmouse->ps2dev; + +if (ps2_command (ps2dev,NULL , init_command) || +ps2_command (ps2dev,NULL , init_command) || +__alps_command_mode_write_reg (psmouse, cmd)) +return -EIO ; +return 0 ; +} +static int alps_hw_init_dolphin_v1 (struct psmouse *psmouse) {struct ps2dev *ps2dev = &psmouse->ps2dev;
@@ -1537,6 +1548,69 @@ static int alps_hw_init_dolphin_v1(struct psmouse *psmouse)return 0 ; } +static int alps_hw_init_dolphin_v2 (struct psmouse *psmouse) +{ +struct ps2dev *ps2dev = &psmouse->ps2dev; + +/* sample rate */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x55 )) + goto error; + +/* idle count */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x64 )) + goto error; + +/* button swap */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x47 )) + goto error; + +/* data priority */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x43 )) + goto error; + +/* power mode */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETPOLL ,0x57 )) + goto error; + +/* +* TODO: For Dolphin V2 touchpads, the threshold should be calculated +* from the OTP settings instead. +*/ +if (alps_enter_command_mode (psmouse) || +alps_command_mode_write_reg (psmouse,0x001f ,0x09 ) || +alps_command_mode_write_reg (psmouse,0x0020 ,0x09 ) || +alps_command_mode_write_reg (psmouse,0x0022 ,0x80 ) || +alps_exit_command_mode (psmouse)) + goto error; + +/* select V1 packet format */ +if (ps2_command (ps2dev,NULL ,PSMOUSE_CMD_DISABLE ) || +alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x85 )) + goto error; + +/* XY and gesture */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x73 )) + goto error; + +/* profile sequence */ +if (alps_short_cmd_v5 (psmouse,PSMOUSE_CMD_SETSTREAM ,0x94 )) + goto error; + +/* final init */ +if (ps2_command (ps2dev,NULL ,PSMOUSE_CMD_SETSTREAM ) || +alps_command_mode_send_nibble (psmouse,0x7 ) || +alps_command_mode_send_nibble (psmouse,0xf ) || +alps_command_mode_send_nibble (psmouse,0xe ) || +ps2_command (ps2dev,NULL ,PSMOUSE_CMD_ENABLE )) + goto error; + +return 0 ; + +error: +alps_exit_command_mode (psmouse); +return -1 ; +} +static void alps_set_defaults (struct alps_data *priv) { priv->byte0 =0x8f ;
@@ -1646,10 +1720,13 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv)if (alps_match_table (psmouse, priv, e7, ec) ==0 ) {return 0 ; }else if (e7[0 ] ==0x73 && e7[1 ] ==0x03 && e7[2 ] ==0x50 && - ec[0 ] ==0x73 && ec[1 ] ==0x01 ) { + ec[0 ] ==0x73 && (ec[1 ] ==0x01 || ec[1 ] ==0x02 )) { priv->proto_version =ALPS_PROTO_V5 ;alps_set_defaults (priv); +if (ec[1 ] ==0x02 ) + priv->hw_init = alps_hw_init_dolphin_v2; +return 0 ; }else if (ec[0 ] ==0x88 && ec[1 ] ==0x08 ) { priv->proto_version =ALPS_PROTO_V3 ;
Signature · 1 line
1.7.10.4