Drivers: hv: vmbus: Use the new infrastructure for delivering VMBUS interrupts
PATCH 1/1 Drivers: hv: vmbus: Use the new infrastructure for delivering VMBUS interrupts
Use the infrastructure for delivering VMBUS interrupts using a special vector. With this patch, we can now properly handle the VMBUS interrupts that can be delivered on any CPU. Also, turn on interrupt load balancing as well.
This patch requires the infrastructure that was implemented in the patch:
X86: Handle Hyper-V vmbus interrupts as special hypervisor interrupts
Greg, Please apply this patch after 3.9-rc1.
--- drivers/hv/channel_mgmt.c | 2 +- drivers/hv/hv.c | 5 ++--- drivers/hv/vmbus_drv.c | 11 +++++++---- 3 files changed, 10 insertions(+), 8 deletions(-)
drivers/hv/channel_mgmt.c +1 -1
@@ -318,7 +318,7 @@ static u32 get_vp_index(uuid_le *type_guid)return 0 ; } cur_cpu = (++next_vp % max_cpus); -return 0 ; +return cur_cpu; }/*
drivers/hv/hv.c +2 -3
@@ -272,7 +272,7 @@ u16 hv_signal_event(void *con_id)* retrieve the initialized message and event pages. Otherwise, we create and * initialize the message and event pages. */ -void hv_synic_init (void *irqarg) +void hv_synic_init (void *arg) {u64 version;union hv_synic_simp simp;
@@ -281,7 +281,6 @@ void hv_synic_init(void *irqarg)union hv_synic_scontrol sctrl;u64 vp_index; -u32 irq_vector = *((u32 *)(irqarg));int cpu =smp_processor_id ();if (!hv_context.hypercall_page)
@@ -335,7 +334,7 @@ void hv_synic_init(void *irqarg)rdmsrl (HV_X64_MSR_SINT0 +VMBUS_MESSAGE_SINT , shared_sint.as_uint64); shared_sint.as_uint64 =0 ; - shared_sint.vector = irq_vector;/* HV_SHARED_SINT_IDT_VECTOR + 0x20; */ + shared_sint.vector =HYPERVISOR_CALLBACK_VECTOR ; shared_sint.masked = false; shared_sint.auto_eoi = true;
drivers/hv/vmbus_drv.c +7 -4
@@ -36,6 +36,7 @@#include <linux/kernel_stat.h> #include <asm/hyperv.h> #include <asm/hypervisor.h> +#include <asm/mshyperv.h> #include "hyperv_vmbus.h"
@@ -528,7 +529,6 @@ static void vmbus_flow_handler(unsigned int irq, struct irq_desc *desc)static int vmbus_bus_init (int irq) {int ret; -unsigned int vector;/* Hypervisor initialization...setup hypercall page..etc */ ret =hv_init ();
@@ -558,13 +558,16 @@ static int vmbus_bus_init(int irq)*/ irq_set_handler (irq, vmbus_flow_handler); - vector =IRQ0_VECTOR + irq; +/* +* Register our interrupt handler. +*/ +hv_register_vmbus_handler (irq, vmbus_isr);/* -* Notify the hypervisor of our irq and +* Initialize the per-cpu interrupt state and * connect to the host. */ -on_each_cpu (hv_synic_init, (void *)&vector,1 ); +on_each_cpu (hv_synic_init,NULL ,1 ); ret =vmbus_connect ();if (ret) goto err_irq;
Signature · 1 line
1.7.4.1
Greg,
Can this patch go in now. I checked Linus' tree and it looks like all the needed patches are all checked in.
Regards,
K. Y
Quoted 117 lines
-----Original Message-----
From: K. Y. Srinivasan [mailto:[email protected]]
Sent: Sunday, February 17, 2013 2:31 PM
To: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Cc: KY Srinivasan
Subject: [PATCH 1/1] Drivers: hv: vmbus: Use the new infrastructure for delivering VMBUS interruptsUse the infrastructure for delivering VMBUS interrupts using a special vector. With this patch, we can now properly handle the VMBUS interrupts that can be delivered on any CPU. Also, turn on interrupt load balancing as well.
This patch requires the infrastructure that was implemented in the patch:
X86: Handle Hyper-V vmbus interrupts as special hypervisor interruptsGreg, Please apply this patch after 3.9-rc1.
Signed-off-by K. Y. Srinivasan <[email protected]>--- drivers/hv/channel_mgmt.c | 2 +- drivers/hv/hv.c | 5 ++--- drivers/hv/vmbus_drv.c | 11 +++++++---- 3 files changed, 10 insertions(+), 8 deletions(-)drivers/hv/channel_mgmt.c +1
-1@@ -318,7 +318,7 @@ static u32 get_vp_index(uuid_le *type_guid)return 0 ; } cur_cpu = (++next_vp % max_cpus); -return 0 ; +return cur_cpu; }/* drivers/hv/hv.c +1
-3@@ -272,7 +272,7 @@ u16 hv_signal_event(void *con_id)* retrieve the initialized message and event pages. Otherwise, we create and * initialize the message and event pages. */ -void hv_synic_init (void *irqarg) +void hv_synic_init (void *arg) {u64 version;union hv_synic_simp simp;@@ -281,7 +281,6 @@ void hv_synic_init(void *irqarg)union hv_synic_scontrol sctrl;u64 vp_index; -u32 irq_vector = *((u32 *)(irqarg));int cpu =smp_processor_id ();if (!hv_context.hypercall_page)@@ -335,7 +334,7 @@ void hv_synic_init(void *irqarg)rdmsrl (HV_X64_MSR_SINT0 +VMBUS_MESSAGE_SINT , shared_sint.as_uint64); shared_sint.as_uint64 =0 ; - shared_sint.vector = irq_vector;/* HV_SHARED_SINT_IDT_VECTOR +
0x20; */drivers/hv/hv.c +1
-0+ shared_sint.vector =HYPERVISOR_CALLBACK_VECTOR ; shared_sint.masked = false; shared_sint.auto_eoi = true;drivers/hv/vmbus_drv.c +1
-1@@ -36,6 +36,7 @@#include <linux/kernel_stat.h> #include <asm/hyperv.h> #include <asm/hypervisor.h> +#include <asm/mshyperv.h> #include "hyperv_vmbus.h" @@ -528,7 +529,6 @@ static void vmbus_flow_handler(unsigned int irq, struct irq_desc *desc)static int vmbus_bus_init (int irq) {int ret; -unsigned int vector;/* Hypervisor initialization...setup hypercall page..etc */ drivers/hv/vmbus_drv.c +6
-4ret =hv_init ();@@ -558,13 +558,16 @@ static int vmbus_bus_init(int irq)*/ irq_set_handler (irq, vmbus_flow_handler); - vector =IRQ0_VECTOR + irq; +/* +* Register our interrupt handler. +*/ +hv_register_vmbus_handler (irq, vmbus_isr);/* -* Notify the hypervisor of our irq and +* Initialize the per-cpu interrupt state and * connect to the host. */ -on_each_cpu (hv_synic_init, (void *)&vector,1 ); +on_each_cpu (hv_synic_init,NULL ,1 ); ret =vmbus_connect ();if (ret) goto err_irq; --1.7.4.1