opensm/osm_console.c: Support portstatus output for incorrect link speeds
PATCH 1/1 opensm/osm_console.c: Support portstatus output for incorrect link speeds
Usually coinciding with use of the force_link_speed configuration option, some link speeds can be observed to be incorrect. For example, a link may be active at QDR even if SDR & DDR speeds are the only ones enabled.
Under these scenarios, the portstatus may incorrectly output port status, confusing users.
A new port output status of "incorrect speed" differentiates ports in this state from other states, so as to not confuse users.
--- opensm/osm_console.c | 18 ++++++++++++++++-- 1 files changed, 16 insertions(+), 2 deletions(-)
opensm/osm_console.c +16 -2
@@ -712,6 +712,8 @@ typedef struct {uint64_t ports_fdr;uint64_t ports_edr;uint64_t ports_unknown_speed; +uint64_t ports_incorrect_speed; +port_report_t *incorrect_speed_ports;uint64_t ports_reduced_speed;port_report_t *reduced_speed_ports; } fabric_stats_t;
@@ -773,7 +775,14 @@ static void __get_stats(cl_map_item_t * const p_map_item, void *context) fs->ports_reduced_width++; } -if ((enabled_speed ^ active_speed) > active_speed) { +/* incorrect speed usually due to problems with force_link_speed */ +if (!(active_speed & enabled_speed)) { +__tag_port_report (&(fs->incorrect_speed_ports), +cl_ntoh64 (node->node_info.node_guid), + port, node->print_desc); + fs->ports_incorrect_speed++; + } +else if ((enabled_speed ^ active_speed) > active_speed) {__tag_port_report (&(fs->reduced_speed_ports),cl_ntoh64 (node->node_info.node_guid), port, node->print_desc);
@@ -933,13 +942,18 @@ static void portstatus_parse(char **p_last, osm_opensm_t * p_osm, FILE * out)fprintf (out," %" PRIu64" at 25.78125 Gbps\n" , fs.ports_edr);if (fs.ports_disabled + fs.ports_reduced_speed + fs.ports_reduced_width - >0 ) { + + fs.ports_incorrect_speed >0 ) {fprintf (out,"\nPossible issues:\n" ); }if (fs.ports_disabled) {fprintf (out," %" PRIu64" disabled\n" , fs.ports_disabled);__print_port_report (out, fs.disabled_ports); } +if (fs.ports_incorrect_speed) { +fprintf (out," %" PRIu64" with incorrect speed\n" , + fs.ports_incorrect_speed); +__print_port_report (out, fs.incorrect_speed_ports); + }if (fs.ports_reduced_speed) {fprintf (out," %" PRIu64" with reduced speed\n" , fs.ports_reduced_speed);
Signature · 8 lines
1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1361489963.24405.68.camel-akkeaxHeDKRliZ7u+bvwcg@public.gmane.org
Hi Al,
Quoted 3 lines · Albert Chu
Usually coinciding with use of the
force_link_speedconfiguration option, some link speeds can be observed to be incorrect. For example, a link may be active at QDR even if SDR & DDR speeds are the only ones enabled.
Are you referring to the fact that after setting the enabled speed, the IB spec does not mandate a link renegotiation and hence one may not have occurred so the enabled speed can be out of whack with the active speed ?
Also, isn't there a similar issue with extended speeds (and force_link_speed_ext) ? If so, should that also be part of this patch ?
Same issue also is there for link width as it works the same way as link speed. Maybe that too is yet another patch.
What do you think ?
-- Hal
Quoted 7 lines
Under these scenarios, the portstatus may incorrectly output port status, confusing users.
A new port output status of "incorrect speed" differentiates ports in this state from other states, so as to not confuse users.
Signed-off-by Albert Chu <[email protected]>
<snip...>
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 5127C824.2090108-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org
Quoted 10 lines · Hal Rosenstock
Hi Al,
Quoted 3 lines · Albert Chu
Usually coinciding with use of the
force_link_speedconfiguration option, some link speeds can be observed to be incorrect. For example, a link may be active at QDR even if SDR & DDR speeds are the only ones enabled.Are you referring to the fact that after setting the enabled speed, the IB spec does not mandate a link renegotiation and hence one may not have occurred so the enabled speed can be out of whack with the active speed ?
Now that I re-read my patch comment, it wasn't the clearest.
What you describe above very well could have occurred or maybe it was just bad hardware. The key was that ports were running at speeds (e.g. QDR) that were not enabled (e.g. only SDR & DDR) and the current opensm console was reporting invalid/incorrect error messages.
Quoted 7 lines
Also, isn't there a similar issue with extended speeds (and
force_link_speed_ext) ? If so, should that also be part of this patch ?Same issue also is there for link width as it works the same way as link speed. Maybe that too is yet another patch.
What do you think ?
Yeah, I should have done those as well. I was only solving the one particular bug found. I'll rework the patch.
Al
Quoted 11 lines
-- Hal
Quoted 7 lines
Under these scenarios, the portstatus may incorrectly output port status, confusing users.
A new port output status of "incorrect speed" differentiates ports in this state from other states, so as to not confuse users.
Signed-off-by Albert Chu <[email protected]><snip...>
Signature · 11 lines
Albert Chu [email protected] Computer Scientist High Performance Systems Division Lawrence Livermore National Laboratory -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html