mtd: m25p80: add entry for w25q128
PATCH 1/1 mtd: m25p80: add entry for w25q128
This device was reported over a year ago on OpenWrt mailing list in the thread [OpenWrt-Devel] RedBoot partition table with winbond m25q128vb (unfortunately, I can't find message id). Macpaul seemed to have problems with partition driver, but it seems the device was working OK.
Reported-by Macpaul Lin <[email protected]>
Cc Felix Fietkau <[email protected]>
Signed-off-by Rafał Miłecki <[email protected]>
---
Felix: I've asked you for upstreaming this patch about a month ago, but I didn't receive any answer, hope it's fine.
--- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+)
drivers/mtd/devices/m25p80.c +1 -0
@@ -838,6 +838,7 @@ static const struct spi_device_id m25p_ids[] = { { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, + { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, /* Catalyst / On Semiconductor -- non-JEDEC */
Signature · 1 line
1.7.10.4