keystone-evm config: add ubifs support
PATCH 1/1 keystone-evm config: add ubifs support
From: Hao Zhang <[email protected]>
--- conf/machine/keystone-evm.conf | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
conf/machine/keystone-evm.conf +18 -1
@@ -14,7 +14,7 @@ require conf/machine/include/keystone.inc PREFERRED_PROVIDER_virtual/kernel = "linux-keystone" -IMAGE_FSTYPES += "tar.bz2 cpio" +IMAGE_FSTYPES += "ubi tar.bz2 cpio" SERIAL_CONSOLE = "115200 ttyS0"
@@ -23,3 +23,20 @@ SYSVINIT_ENABLED_GETTYS = "" UBOOT_MACHINE = "tci6638_evm_config" MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa" +# do ubiattach /dev/ubi_ctrl -m 4 +# From dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: logical eraseblock size: 126976 bytes +# from ubiattach stdout: +# UBI device number 0, total 857 LEBs +# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857" +MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857" + +# do ubiattach /dev/ubi_ctrl -m 4 +# from dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: physical eraseblock size: 131072 bytes (128 KiB) +# UBI: sub-page size: 2048 +UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048" + +
Signature · 1 line
1.7.9.5
Quoted 1 line · On Tue, Feb 26, 2013 at 02:48:50PM -0500, [email protected] wrote:
From: Hao Zhang <[email protected]>
I assume you double-checked the actual UBI ARGS values below for the Keystone. Other than that looks fine to me - I'll push it shortly.
Quoted 9 lines
--- conf/machine/keystone-evm.conf | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)conf/machine/keystone-evm.conf +0
-0
conf/machine/keystone-evm.conf require conf/machine/include/keystone.inc · line 17
Quoted 5 lines
conf/machine/keystone-evm.conf +1
-1@@ -14,7 +14,7 @@ require conf/machine/include/keystone.inc PREFERRED_PROVIDER_virtual/kernel = "linux-keystone" -IMAGE_FSTYPES += "tar.bz2 cpio" +IMAGE_FSTYPES += "ubi tar.bz2 cpio"
BTW, speaking of this - do you still need uncompressed cpio? Last time we talked, we were not sure if compressed cpio.gz would be sufficient.
Quoted 31 lines
conf/machine/keystone-evm.conf +17
-0SERIAL_CONSOLE = "115200 ttyS0"@@ -23,3 +23,20 @@ SYSVINIT_ENABLED_GETTYS = "" UBOOT_MACHINE = "tci6638_evm_config" MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa" +# do ubiattach /dev/ubi_ctrl -m 4 +# From dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: logical eraseblock size: 126976 bytes +# from ubiattach stdout: +# UBI device number 0, total 857 LEBs +# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857" +MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857" + +# do ubiattach /dev/ubi_ctrl -m 4 +# from dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: physical eraseblock size: 131072 bytes (128 KiB) +# UBI: sub-page size: 2048 +UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048" + +Signature · 6 lines
1.7.9.5 _______________________________________________ meta-ti mailing list [email protected] https://lists.yoctoproject.org/listinfo/meta-ti
Quoted 6 lines · Denys Dmytriyenko
Quoted 1 line · On Tue, Feb 26, 2013 at 02:48:50PM -0500, [email protected] wrote:
From: Hao Zhang<[email protected]>
I assume you double-checked the actual UBI ARGS values below for the Keystone. Other than that looks fine to me - I'll push it shortly.
Yes, I did, thanks.
Quoted 50 lines
Quoted 9 lines
--- conf/machine/keystone-evm.conf | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)conf/machine/keystone-evm.conf +0
-0conf/machine/keystone-evm.conf require conf/machine/include/keystone.inc · line 17
Quoted 5 lines
conf/machine/keystone-evm.conf +1
-1@@ -14,7 +14,7 @@ require conf/machine/include/keystone.inc PREFERRED_PROVIDER_virtual/kernel = "linux-keystone" -IMAGE_FSTYPES += "tar.bz2 cpio" +IMAGE_FSTYPES += "ubi tar.bz2 cpio"BTW, speaking of this - do you still need uncompressed cpio? Last time we talked, we were not sure if compressed cpio.gz would be sufficient.
Quoted 31 lines
conf/machine/keystone-evm.conf +17
-1SERIAL_CONSOLE = "115200 ttyS0"@@ -23,3 +23,20 @@ SYSVINIT_ENABLED_GETTYS = "" UBOOT_MACHINE = "tci6638_evm_config" MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa" +# do ubiattach /dev/ubi_ctrl -m 4 +# From dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: logical eraseblock size: 126976 bytes +# from ubiattach stdout: +# UBI device number 0, total 857 LEBs +# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857" +MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857" + +# do ubiattach /dev/ubi_ctrl -m 4 +# from dmesg: +# UBI: smallest flash I/O unit: 2048 +# UBI: physical eraseblock size: 131072 bytes (128 KiB) +# UBI: sub-page size: 2048 +UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048" + + --1.7.9.5
_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti