am33xx: Update DDR3 EMIF configuration sequence
PATCH 1/1 am33xx: Update DDR3 EMIF configuration sequence
Based on
http://processors.wiki.ti.com/index.php/AM335x_EMIF_Configuration_tips
we need to re-work our sequence in config_sdram slightly to match what the TRM describes as the correct sequence. In our current (incorrect) sequence some edge cases may fail to initalize correctly.
Signed-off-by Tom Rini <[email protected]>
--- arch/arm/cpu/armv7/am33xx/ddr.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
arch/arm/cpu/armv7/am33xx/ddr.c +9 -3
@@ -45,13 +45,19 @@ static struct ddr_cmdtctrl *ioctrl_reg = {*/ void config_sdram (const struct emif_regs *regs) { -writel (regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); -writel (regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); -if (regs->zq_config){ +if (regs->zq_config) { +/* +* A value of 0x2800 for the REF CTRL will give us +* about 570us for a delay, which will be long enough +* to configure things. +*/ +writel (0x2800 , &emif_reg->emif_sdram_ref_ctrl);writel (regs->zq_config, &emif_reg->emif_zq_config);writel (regs->sdram_config, &cstat->secure_emif_sdram_config); }writel (regs->sdram_config, &emif_reg->emif_sdram_config); +writel (regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); +writel (regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); }/**
Signature · 1 line
1.7.9.5