Skip to contentSkip to conversation

mac80211: Stop timers before canceling work items.

PATCH In review [email protected] 3 participants 7 messages Feb 20, 2013 – Feb 26, 2013 mac80211

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 mac80211: Stop timers before canceling work items.

From: Ben Greear <[email protected]>

Re-order the quiesce code so that timers are always stopped before work-items are flushed. This was not the problem I saw, but I think it may still be more correct.

---
 net/mac80211/mlme.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)
net/mac80211/mlme.c +8 -5
index 164ecf0..4001d1c 100644
@@ -2946,6 +2946,13 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/* Stop timers before deleting work items, as timers could
+	 * race and re-add the work-items.
+	 * These will be re-established on connection.
+	 */
+	del_timer_sync(&ifmgd->conn_mon_timer);
+	del_timer_sync(&ifmgd->bcn_mon_timer);
+
 	/*
 	 * we need to use atomic bitops for the running bits
 	 * only because both timers might fire at the same
@@ -2960,13 +2967,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->chswitch_work);
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
-	/* these will just be re-established on connection */
-	del_timer_sync(&ifmgd->conn_mon_timer);
-	del_timer_sync(&ifmgd->bcn_mon_timer);
+	cancel_work_sync(&ifmgd->chswitch_work);
 }
 
 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
Signature · 1 line
1.7.3.4
#1 lore raw

PATCH v2 2/2 mac80211: Fix crash due to un-canceled work-items.

From: Ben Greear <[email protected]>

The monitor_work and beacon_connection_loss_work items were not being canceled on disassociation (and not on deletion either). This leads to work-items trying to run after memory has been deleted.

There is not a clean way to cancel these in the disassociation logic because they must be canceled outside of the ifmgd->mtx lock, so just cancel them in mgd_stop logic that tears down the station.

This fixes the crashes we see in 3.7.9+. The crash stack trace itself isn't so helpful, but this warning gives more useful info:

------------[ cut here ]------------
WARNING: at /home/greearb/git/linux-3.7.dev.y/lib/debugobjects.c:261 debug_print_object+0x7c/0x8d()
Hardware name: To be filled by O.E.M.
ODEBUG: free active (active state 0) object type: work_struct hint: ieee80211_sta_monitor_work+0x0/0x14 [mac80211]
Modules linked in: nf_nat_ipv4 nf_nat 8021q garp stp llc macvlan pktgen lockd sunrpc f71882fg iTCO_wdt iTCO_vendor_support coretemp gpio_ich hwmon mperf kvm cdc_acm snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep microcode snd_seq snd_seq_device serio_raw pcspkr snd_pcm ath9k ath9k_common ath9k_hw ath i2c_i801 ppdev mac80211 lpc_ich cfg80211 snd_page_alloc e1000e snd_timer snd soundcore parport_pc parport uinput ipv6 i915 video i2c_algo_bit drm_kms_helper drm i2c_core [last unloaded: iptable_nat]
Pid: 14743, comm: iw Tainted: G         C O 3.7.9+ #11
Call Trace:
 [<ffffffff81087ef8>] warn_slowpath_common+0x80/0x98
 [<ffffffff81087fa4>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff812a2608>] debug_print_object+0x7c/0x8d
 [<ffffffffa025f5ad>] ? ieee80211_beacon_connection_loss_work+0x88/0x88 [mac80211]
 [<ffffffff812a2b9a>] ? debug_check_no_obj_freed+0x65/0x1c3
 [<ffffffff812a2bca>] debug_check_no_obj_freed+0x95/0x1c3
 [<ffffffff8149f465>] ? netdev_release+0x39/0x3e
 [<ffffffff8114cc69>] slab_free_hook+0x70/0x79
 [<ffffffff8114ea3e>] kfree+0x62/0xb7
 [<ffffffff8149f465>] netdev_release+0x39/0x3e
 [<ffffffff8136ad67>] device_release+0x52/0x8a
 [<ffffffff812937db>] kobject_release+0x121/0x158
 [<ffffffff81293612>] kobject_put+0x4c/0x50
 [<ffffffff8148f0d7>] netdev_run_todo+0x25c/0x27e
 [<ffffffff8149b2a0>] rtnl_unlock+0x9/0xb
 [<ffffffffa01d31a7>] nl80211_post_doit+0x49/0x4e [cfg80211]
 [<ffffffff814b0928>] genl_rcv_msg+0x25b/0x288
 [<ffffffff814b06a3>] ? genl_lock+0x12/0x14
 [<ffffffff814b06cd>] ? genl_rcv+0x28/0x28
 [<ffffffff814aef13>] netlink_rcv_skb+0x3e/0x8f
 [<ffffffff814b06c6>] genl_rcv+0x21/0x28
 [<ffffffff814aecd1>] netlink_unicast+0xe9/0x16f
 [<ffffffff814af4b3>] netlink_sendmsg+0x264/0x282
 [<ffffffff8147d785>] ? rcu_read_unlock+0x5b/0x5d
 [<ffffffff814784ab>] __sock_sendmsg_nosec+0x58/0x61
 [<ffffffff814798e6>] __sock_sendmsg+0x3d/0x48
 [<ffffffff8147995a>] sock_sendmsg+0x69/0x82
 [<ffffffff8112c835>] ? might_fault+0x84/0x8b
 [<ffffffff814849ce>] ? copy_from_user+0x2a/0x2c
 [<ffffffff81484da0>] ? verify_iovec+0x4f/0xa3
 [<ffffffff8147b8e7>] __sys_sendmsg+0x1fe/0x280
 [<ffffffff810a8058>] ? up_read+0x1e/0x36
 [<ffffffff8116ea14>] ? fcheck_files+0xac/0xea
 [<ffffffff8116efd3>] ? fget_light+0x35/0xae
 [<ffffffff8147badb>] sys_sendmsg+0x3d/0x5b
 [<ffffffff815595e9>] system_call_fastpath+0x16/0x1b
---[ end trace 791ff0751a368327 ]---
---
 net/mac80211/mlme.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
net/mac80211/mlme.c +6 -0
index 4001d1c..f46607a 100644
@@ -3651,6 +3651,12 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/* Make sure some work items will not run after this.
+	 * Have to do this outside the ifmgd->mtx lock.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);
+
 	mutex_lock(&ifmgd->mtx);
 	if (ifmgd->assoc_data)
 		ieee80211_destroy_assoc_data(sdata, false);
Signature · 1 line
1.7.3.4
#2 lore raw

Re: [PATCH v2 2/2] mac80211: Fix crash due to un-canceled work-items.

Quoted 6 lines · On Wed, Feb 20, 2013 at 09:41:09AM -0800, [email protected] wrote:

From: Ben Greear <[email protected]>

The monitor_work and beacon_connection_loss_work items were not being canceled on disassociation (and not on deletion either). This leads to work-items trying to run after memory has been deleted.

[skip]

net/mac80211/mlme.c void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) · line 3658

Quoted 6 lines
net/mac80211/mlme.c +5 -0
+	/* Make sure some work items will not run after this.
+	 * Have to do this outside the ifmgd->mtx lock.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);

Other works should be canceled as well. Ben, could you repost this patch with proper comment?

Stanislaw

author
#3 lore raw

Re: [PATCH v2 2/2] mac80211: Fix crash due to un-canceled work-items.

Quoted 9 lines · Stanislaw Gruszka
Quoted 6 lines · On Wed, Feb 20, 2013 at 09:41:09AM -0800, [email protected] wrote:

From: Ben Greear <[email protected]>

The monitor_work and beacon_connection_loss_work items were not being canceled on disassociation (and not on deletion either). This leads to work-items trying to run after memory has been deleted.

[skip]

Quoted 1 line
Quoted 8 lines

net/mac80211/mlme.c void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) · line 3658

Quoted 5 lines
net/mac80211/mlme.c +5 -0
+	/* Make sure some work items will not run after this.
+	 * Have to do this outside the ifmgd->mtx lock.
+	 */
+	cancel_work_sync(&ifmgd->monitor_work);
+	cancel_work_sync(&ifmgd->beacon_connection_loss_work);

Other works should be canceled as well. Ben, could you repost this patch with proper comment?

At least in 3.7 kernel, this seems to be all that is needed.

I don't have much time to work on this now...

Thanks,
Ben

Quoted 3 lines

Stanislaw

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
#4 lore raw
In reply to [email protected]
Quoted 6 lines · On Wed, Feb 20, 2013 at 09:41:08AM -0800, [email protected] wrote:

From: Ben Greear <[email protected]>

Re-order the quiesce code so that timers are always stopped before work-items are flushed. This was not the problem I saw, but I think it may still be more correct.

I posted patch which remove quiesce functions, so this one can be skipped.

http://marc.info/?l=linux-wireless&m=136179302820130&w=2

Stanislaw

Quoted 44 lines
---
 net/mac80211/mlme.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)
net/mac80211/mlme.c +8 -5
index 164ecf0..4001d1c 100644
@@ -2946,6 +2946,13 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 
+	/* Stop timers before deleting work items, as timers could
+	 * race and re-add the work-items.
+	 * These will be re-established on connection.
+	 */
+	del_timer_sync(&ifmgd->conn_mon_timer);
+	del_timer_sync(&ifmgd->bcn_mon_timer);
+
 	/*
 	 * we need to use atomic bitops for the running bits
 	 * only because both timers might fire at the same
@@ -2960,13 +2967,9 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
 	if (del_timer_sync(&ifmgd->timer))
 		set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
 
-	cancel_work_sync(&ifmgd->chswitch_work);
 	if (del_timer_sync(&ifmgd->chswitch_timer))
 		set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
-
-	/* these will just be re-established on connection */
-	del_timer_sync(&ifmgd->conn_mon_timer);
-	del_timer_sync(&ifmgd->bcn_mon_timer);
+	cancel_work_sync(&ifmgd->chswitch_work);
 }
 
 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
Signature · 6 lines
1.7.3.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
maintainer
#5 lore raw
Quoted 10 lines · Stanislaw Gruszka
Quoted 6 lines · On Wed, Feb 20, 2013 at 09:41:08AM -0800, [email protected] wrote:

From: Ben Greear <[email protected]>

Re-order the quiesce code so that timers are always stopped before work-items are flushed. This was not the problem I saw, but I think it may still be more correct.

I posted patch which remove quiesce functions, so this one can be skipped.

Since I'm not going to apply your patches for 3.8, I still took this.

johannes