arm: mvebu: enable the USB ports on Armada 370 Reference Design board
PATCH 1/1 arm: mvebu: enable the USB ports on Armada 370 Reference Design board
This patch modifies the Armada 370 Reference Design DTS file to enable support for the two USB ports found on this board.
---
Jason,
Since this board was added after USB support was added to Marvell Armada XP/370, I would appreciate if you could fold this into a pull request for 3.9-rc2 for instance.
Thanks!
arch/arm/boot/dts/armada-370-rd.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/boot/dts/armada-370-rd.dts +8 -0
@@ -64,5 +64,13 @@ status = "okay"; /* No CD or WP GPIOs */ }; + + usb at d0050000 { + status = "okay"; + }; + + usb at d0051000 { + status = "okay"; + }; }; };
Signature · 1 line
1.7.10.4
PATCH 1/1 arm: mvebu: enable the USB ports on Armada 370 Reference Design board
Quoted 7 lines · Florian Fainelli
This patch modifies the Armada 370 Reference Design DTS file to enable support for the two USB ports found on this board.
Signed-off-by Florian Fainelli <[email protected]>---
Jason,
Quoted 8 lines
Since this board was added after USB support was added to Marvell Armada XP/370, I would appreciate if you could fold this into a pull request for 3.9-rc2 for instance.
Thanks!
arch/arm/boot/dts/armada-370-rd.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
Please keep in mind that usually only fixes are applied to the -rcX's for this window. I've applied it this time because it is cleaning up a DT conversion we already did, and it doesn't touch C code.
At any rate, applied to mvebu/fixes
thx,
Jason.