AM33xx mmc support
Subsystems (4)
cover AM33xx mmc support
This series enable MMC support on AM33xx platforms. Support for platforms incorporating the EDMA DMAC is added using the dma_get_slave_sg_limits() api. AM33xx DTS supported is added for Beaglebone, AM335x-EVM, and AM335x-EVMSK.
These patches were split out from the v5 version of the AM33xx DMA series and split from the generic DT/dmanegine omap_hsmmc changes.
The series has the following dependencies:
- edma private api error check fix http://www.spinics.net/lists/arm-kernel/msg227886.html - DMA Engine support for AM33XX http://www.spinics.net/lists/linux-omap/msg87634.html - omap_hsmmc DT DMA Client support http://www.spinics.net/lists/linux-omap/msg87623.html - dmaengine: add slave sg transfer limits api https://lkml.org/lkml/2013/3/6/462
Matt Porter (2):
mmc: omap_hsmmc: set max_segs based on dma engine limits
ARM: dts: add AM33XX MMC support
arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28 ++++++++++++++++++++++++++++ drivers/mmc/host/omap_hsmmc.c | 8 ++++++++ 5 files changed, 57 insertions(+)
Signature · 1 line
1.7.9.5
PATCH 1/2 mmc: omap_hsmmc: set max_segs based on dma engine limits
The EDMA DMAC has a hardware limitation that prevents supporting scatter gather lists with any number of segments. The DMA Engine API reports the maximum number of segments a channel can support via the optional dma_get_slave_sg_limits() API. If the max_nr_segs limit is present, the value is used to configure mmc->max_segs appropriately.
--- drivers/mmc/host/omap_hsmmc.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/mmc/host/omap_hsmmc.c +8 -0
@@ -1769,6 +1769,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)const struct of_device_id *match;dma_cap_mask_t mask;unsigned tx_req, rx_req; +struct dma_slave_sg_limits *dma_sg_limits;struct pinctrl *pinctrl; match =of_match_device (of_match_ptr (omap_mmc_of_match), &pdev->dev);
@@ -1935,6 +1936,13 @@ static int omap_hsmmc_probe(struct platform_device *pdev) goto err_irq; } +/* Some DMA Engines only handle a limited number of SG segments */ + dma_sg_limits =dma_get_slave_sg_limits (host->rx_chan, +DMA_SLAVE_BUSWIDTH_4_BYTES , + mmc->max_blk_size /4 ); +if (dma_sg_limits && dma_sg_limits->max_seg_nr) + mmc->max_segs = dma_sg_limits->max_seg_nr; +/* Request IRQ for MMC operations */ ret =request_irq (host->irq, omap_hsmmc_irq,0 ,mmc_hostname (mmc), host);
Signature · 1 line
1.7.9.5
PATCH 2/2 ARM: dts: add AM33XX MMC support
In reply to Matt PorterAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28 ++++++++++++++++++++++++++++ 4 files changed, 49 insertions(+)
arch/arm/boot/dts/am335x-bone.dts +7 -0
@@ -120,6 +120,8 @@ }; ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };
@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};
arch/arm/boot/dts/am335x-evm.dts +7 -0
@@ -232,6 +232,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };
@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};
arch/arm/boot/dts/am335x-evmsk.dts +7 -0
@@ -244,7 +244,14 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};
arch/arm/boot/dts/am33xx.dtsi +28 -0
@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + }; + wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2";
Signature · 1 line
1.7.9.5
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 114 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28 ++++++++++++++++++++++++++++ 4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator at 5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +17
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc at 48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc at 481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>;
arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 10 lines
arch/arm/boot/dts/am33xx.dtsi +10
-0+ dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc at 47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };
Any specific reason why you did not add edma entry here as well?
Also, I wonder why "interrupt" property is not coming here, I understand That hwmod is filling the gap here; but I would still recommend you to complete The DT node, as we only support DT boot.
I will test the whole patch series today and update you.
Thanks,
Vaibhav
Quoted 12 lines
arch/arm/boot/dts/am33xx.dtsi +1
-1+ wdt2: wdt at 44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; --1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 117 lines · Vaibhav Hiremath
Quoted 117 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28 ++++++++++++++++++++++++++++ 4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +20
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + };
Quoted 8 lines
arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 7 lines
arch/arm/boot/dts/am33xx.dtsi +7
-0+ + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };Any specific reason why you did not add edma entry here as well?
Yes, I've answered this one before and I think this illustrates a need for a comment in the .dtsi. mmc3 edma event are on the crossbar and so the event that will be mapped is system-specific. Since Luca is still working on DT support for WiLink, there's no way to show an example of how this is used upstream as that's the only in-kernel user.
I have a test driver I've cited in the postings that shows how the crossbar is configured via the board .dts. It doesn't belong in the .dtsi, however, in this case. When WiLink DT support is ready we can have an entry in the am335x-evmsk.dts that shows this case.
Quoted 3 lines
Also, I wonder why "interrupt" property is not coming here, I understand That hwmod is filling the gap here; but I would still recommend you to complete The DT node, as we only support DT boot.
Yeah, I only added needed properties so as to not confuse people as to where the interrupt resources are coming from. If you feel strongly about this I don't have a problem with adding unused data in the dts. I suppose this will help clear things to have a switch away from using the hwmod data.
Quoted 1 line
I will test the whole patch series today and update you.
Thanks.
-Matt
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 153 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 7 lines · Vaibhav Hiremath
Quoted 7 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List;Linux
Quoted 6 lines
Quoted 6 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Quoted 7 lines
Quoted 7 lines
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28++++++++++++++++++++++++++++
Quoted 97 lines
Quoted 97 lines
4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator at 5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +20
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc at 48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc at 481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + };Quoted 8 lines
arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 7 lines
arch/arm/boot/dts/am33xx.dtsi +7
-0+ + mmc3: mmc at 47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };Any specific reason why you did not add edma entry here as well?
Yes, I've answered this one before and I think this illustrates a need for a comment in the .dtsi. mmc3 edma event are on the crossbar and so the event that will be mapped is system-specific. Since Luca is still working on DT support for WiLink, there's no way to show an example of how this is used upstream as that's the only in-kernel user.
I have a test driver I've cited in the postings that shows how the crossbar is configured via the board .dts. It doesn't belong in the .dtsi, however, in this case. When WiLink DT support is ready we can have an entry in the
am335x-evmsk.dtsthat shows this case.Quoted 1 line
Also, I wonder why "interrupt" property is not coming here, I
understand
Quoted 1 line
That hwmod is filling the gap here; but I would still recommend you
Quoted 8 lines
to complete
Quoted 1 line
The DT node, as we only support DT boot.
Yeah, I only added needed properties so as to not confuse people as to where the interrupt resources are coming from. If you feel strongly about this I don't have a problem with adding unused data in the dts. I suppose this will help clear things to have a switch away from using the hwmod data.
Its not true, if you specify interrupt property in the DTS file It is being used. Please refer to the omap_device.c file. I am pasting Comments from code for your reference -
389 /*
390 * Non-DT Boot: 391 * Here, pdev->num_resources = 0, and we should get all the 392 * resources from hwmod. 393 * 394 * DT Boot: 395 * OF framework will construct the resource structure (currently 396 * does for MEM & IRQ resource) and we should respect/use these 397 * resources, killing hwmod dependency. 398 * If pdev->num_resources > 0, we assume that MEM & IRQ resources 399 * have been allocated by OF layer already (through DTB). 400 * As preparation for the future we examine the OF provided resources 401 * to see if we have DMA resources provided already. In this case 402 * there is no need to update the resources for the device, we use the 403 * OF provided ones. 404 * 405 * TODO: Once DMA resource is available from OF layer, we should 406 * kill filling any resources from hwmod. 407 */
Quoted 3 lines
Quoted 2 lines
I will test the whole patch series today and update you.
I just booted up the EVM with all the patches you have submitted recently, There are two issues I can see,
1. Stack dump from MMC driver.
This happens because you do not have "interrupt" property mentioned In the dts file. I have added "interrupt" property and dump went away.
2. And MMC rootFS mount is __not__ working for me.
3. I get following error message -
[ 2.118207] omap_hsmmc mmc.3: unable to obtain RX DMA engine channel 25
I haven?t debugged it yet, just thought I should report it before Proceeding further.
Boot Log:
======================================
U-Boot# mmc rescan 0
U-Boot# fatload mmc 0 82000000 uImage reading uImage
4026992 bytes read in 441 ms (8.7 MiB/s) U-Boot# fatload mmc 0 81000000 am335x-evm.dtb reading am335x-evm.dtb
11371 bytes read in 10 ms (1.1 MiB/s) U-Boot# run mmcargs
U-Boot# bootm 82000000 - 81000000
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4026928 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
Booting using the fdt blob at 0x81000000 Loading Kernel Image ... OK
OK
Using Device Tree in place at 81000000, end 81005c6a
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.9.0-rc1-00122-g106e3c6 (XXX at psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 SMP Thu Mar 7 16:57:39 IST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x EVM [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c181d000 s13632 r8192 d15040 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait ip=none [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 1008260k/1008260k available, 40316k reserved, 269312K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc071fa34 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0775540 ( 342 kB) [ 0.000000] .data : 0xc0776000 - 0xc080f0e0 ( 613 kB) [ 0.000000] .bss : 0xc080f0e0 - 0xc0d6a348 (5485 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000989] Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208) [ 0.109762] pid_max: default: 32768 minimum: 301 [ 0.110250] Security Framework initialized [ 0.110399] Mount-cache hash table entries: 512 [ 0.121898] CPU: Testing write buffer coherency: ok [ 0.123398] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.123476] Setting up static identity map for 0xc0510518 - 0xc0510588 [ 0.126105] Brought up 1 CPUs [ 0.126130] SMP: Total of 1 processors activated (530.84 BogoMIPS). [ 0.126142] CPU: All CPU(s) started in SVC mode. [ 0.129134] devtmpfs: initialized [ 0.199323] pinctrl core: initialized pinctrl subsystem [ 0.205505] regulator-dummy: no parameters [ 0.209247] NET: Registered protocol family 16 [ 0.217051] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236271] platform 49000000.edma: alias fck already exists [ 0.236311] platform 49000000.edma: alias fck already exists [ 0.236333] platform 49000000.edma: alias fck already exists [ 0.241486] OMAP GPIO hardware version 0.1 [ 0.265045] No ATAGs? [ 0.265073] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.271061] Serial: AMBA PL011 UART driver [ 0.329077] bio: create slab <bio-0> at 0 [ 0.406141] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.408010] vbat: 5000 mV [ 0.409244] lis3_reg: no parameters [ 0.417237] SCSI subsystem initialized [ 0.419384] usbcore: registered new interface driver usbfs [ 0.420409] usbcore: registered new interface driver hub [ 0.421312] usbcore: registered new device driver usb [ 0.423218] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19 [ 0.425064] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.427105] tps65910 0-002d: No interrupt support, no core IRQ [ 0.433470] vrtc: 1800 mV [ 0.433880] vrtc: supplied by vbat [ 0.437014] vio: at 1500 mV [ 0.437157] vio: supplied by vbat [ 0.440177] vdd_mpu: 912 <--> 1312 mV at 1262 mV [ 0.440331] vdd_mpu: supplied by vbat [ 0.443151] vdd_core: 912 <--> 1150 mV at 1137 mV [ 0.443293] vdd_core: supplied by vbat [ 0.445806] vdd3: 5000 mV [ 0.448346] vdig1: at 1800 mV [ 0.448486] vdig1: supplied by vbat [ 0.451824] vdig2: at 1800 mV [ 0.451967] vdig2: supplied by vbat [ 0.454524] vpll: at 1800 mV [ 0.454652] vpll: supplied by vbat [ 0.457185] vdac: at 1800 mV [ 0.457311] vdac: supplied by vbat [ 0.459975] vaux1: at 1800 mV [ 0.460112] vaux1: supplied by vbat [ 0.462698] vaux2: at 3300 mV [ 0.462830] vaux2: supplied by vbat [ 0.465339] vaux33: at 3300 mV [ 0.465466] vaux33: supplied by vbat [ 0.467947] vmmc: omap_i2c 4802a000.i2c: did not get pins for i2c error: -19 [ 0.471641] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.482881] Switching to clocksource gp_timer [ 0.607600] NET: Registered protocol family 2 [ 0.609603] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.609956] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.613521] TCP: Hash tables configured (established 8192 bind 8192) [ 0.613821] TCP: reno registered [ 0.613863] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.614323] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.615553] NET: Registered protocol family 1 [ 0.617700] RPC: Registered named UNIX socket transport module. [ 0.617727] RPC: Registered udp transport module. [ 0.617739] RPC: Registered tcp transport module. [ 0.617752] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.618827] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.619316] CPU PMU: probing PMU on CPU 0 [ 0.619350] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.776940] bounce pool size: 64 pages [ 0.777782] VFS: Disk quotas dquot_6.5.2 [ 0.777995] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.780682] NFS: Registering the id_resolver key type [ 0.781239] Key type id_resolver registered [ 0.781263] Key type id_legacy registered [ 0.781406] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. [ 0.781933] msgmni has been set to 1475 [ 0.785529] io scheduler noop registered [ 0.785553] io scheduler deadline registered [ 0.785652] io scheduler cfq registered (default) [ 0.787072] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.791600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.798575] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.799200] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.549008] console [ttyO0] enabled [ 1.586206] brd: module loaded [ 1.608954] loop: module loaded [ 1.617979] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.626230] OneNAND driver initializing [ 1.636711] usbcore: registered new interface driver asix [ 1.642874] usbcore: registered new interface driver ax88179_178a [ 1.650170] usbcore: registered new interface driver cdc_ether [ 1.657216] usbcore: registered new interface driver smsc95xx [ 1.663954] usbcore: registered new interface driver net1080 [ 1.670358] usbcore: registered new interface driver cdc_subset [ 1.677253] usbcore: registered new interface driver zaurus [ 1.683851] usbcore: registered new interface driver cdc_ncm [ 1.691998] usbcore: registered new interface driver cdc_wdm [ 1.698149] Initializing USB Mass Storage driver... [ 1.703927] usbcore: registered new interface driver usb-storage [ 1.710287] USB Mass Storage support registered. [ 1.715804] usbcore: registered new interface driver usbtest [ 1.724258] mousedev: PS/2 mouse device common for all mice [ 1.735860] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.745083] i2c /dev entries driver [ 1.751902] Driver for 1-wire Dallas network protocol. [ 1.762053] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.773746] omap-dma-engine omap-dma-engine: allocating channel for 25 [ 1.780741] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 1.786477] lock: dma_chan_lock+0x0/0x20, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 1.795523] [<c001acb8>] (unwind_backtrace+0x0/0xf0) from [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) [ 1.805284] [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) from [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) [ 1.815692] [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c0040450>] (omap_request_dma+0x24/0x1b8) [ 1.826014] [<c0040450>] (omap_request_dma+0x24/0x1b8) from [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50) [ 1.836970] [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50) from [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) [ 1.847457] [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) from [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) [ 1.857322] [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) from [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) [ 1.867732] [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) from [<c0339dc4>] (platform_drv_probe+0x18/0x1c) [ 1.877767] [<c0339dc4>] (platform_drv_probe+0x18/0x1c) from [<c0338a68>] (really_probe+0x74/0x200) [ 1.887342] [<c0338a68>] (really_probe+0x74/0x200) from [<c0338d0c>] (driver_probe_device+0x30/0x48) [ 1.897010] [<c0338d0c>] (driver_probe_device+0x30/0x48) from [<c0338db8>] (__driver_attach+0x94/0x98) [ 1.906860] [<c0338db8>] (__driver_attach+0x94/0x98) from [<c0337424>] (bus_for_each_dev+0x64/0x88) [ 1.916433] [<c0337424>] (bus_for_each_dev+0x64/0x88) from [<c03383a8>] (bus_add_driver+0x1c0/0x240) [ 1.926098] [<c03383a8>] (bus_add_driver+0x1c0/0x240) from [<c03392ec>] (driver_register+0x78/0x144) [ 1.935758] [<c03392ec>] (driver_register+0x78/0x144) from [<c00086a4>] (do_one_initcall+0x34/0x180) [ 1.945432] [<c00086a4>] (do_one_initcall+0x34/0x180) from [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) [ 1.955553] [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) from [<c0502664>] (kernel_init+0x8/0xe4) [ 1.965139] [<c0502664>] (kernel_init+0x8/0xe4) from [<c00133f0>] (ret_from_fork+0x14/0x24) [ 1.974061] omap_hsmmc mmc.3: unable to obtain RX DMA engine channel 25 [ 1.982218] ledtrig-cpu: registered to indicate activity on CPUs [ 1.989997] usbcore: registered new interface driver usbhid [ 1.995997] usbhid: USB HID core driver [ 2.001076] oprofile: using arm/armv7 [ 2.005481] TCP: cubic registered [ 2.008992] Initializing XFRM netlink socket [ 2.013601] NET: Registered protocol family 17 [ 2.018370] NET: Registered protocol family 15 [ 2.023292] Key type dns_resolver registered [ 2.027918] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.036074] ThumbEE CPU extension supported. [ 2.103314] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.109789] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.117400] libphy: 4a101000.mdio: probed [ 2.121661] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 2.130442] Random MACID = aa:e0:1c:4f:40:25 [ 2.137280] of_get_named_gpio_flags exited with status 2 [ 2.143115] of_get_named_gpio_flags exited with status 3 [ 2.149951] input: volume_keys.7 as /devices/volume_keys.7/input/input0 [ 2.158349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.168602] Waiting for root device /dev/mmcblk0p2...
Thanks.
Vaibhav
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 178 lines · Vaibhav Hiremath
Quoted 153 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 7 lines · Vaibhav Hiremath
Quoted 7 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List;Linux
Quoted 6 lines
Quoted 6 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Quoted 7 lines
Quoted 7 lines
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28++++++++++++++++++++++++++++
Quoted 97 lines
Quoted 97 lines
4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +20
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>; + dma-names = "tx", "rx"; + status = "disabled"; + };Quoted 8 lines
arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 7 lines
arch/arm/boot/dts/am33xx.dtsi +7
-0+ + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };Any specific reason why you did not add edma entry here as well?
Yes, I've answered this one before and I think this illustrates a need for a comment in the .dtsi. mmc3 edma event are on the crossbar and so the event that will be mapped is system-specific. Since Luca is still working on DT support for WiLink, there's no way to show an example of how this is used upstream as that's the only in-kernel user.
I have a test driver I've cited in the postings that shows how the crossbar is configured via the board .dts. It doesn't belong in the .dtsi, however, in this case. When WiLink DT support is ready we can have an entry in the
am335x-evmsk.dtsthat shows this case.Quoted 1 line
Also, I wonder why "interrupt" property is not coming here, I
understand
Quoted 1 line
That hwmod is filling the gap here; but I would still recommend you
Quoted 8 lines
to complete
Quoted 1 line
The DT node, as we only support DT boot.
Yeah, I only added needed properties so as to not confuse people as to where the interrupt resources are coming from. If you feel strongly about this I don't have a problem with adding unused data in the dts. I suppose this will help clear things to have a switch away from using the hwmod data.
Its not true, if you specify interrupt property in the DTS file It is being used. Please refer to the
omap_device.cfile. I am pasting Comments from code for your reference -389 /*
390 * Non-DT Boot: 391 * Here, pdev->num_resources = 0, and we should get all the 392 * resources from hwmod. 393 * 394 * DT Boot: 395 * OF framework will construct the resource structure (currently 396 * does for MEM & IRQ resource) and we should respect/use these 397 * resources, killing hwmod dependency. 398 * If pdev->num_resources > 0, we assume that MEM & IRQ resources 399 * have been allocated by OF layer already (through DTB).
Quoted 8 lines
400 * As preparation for the future we examine the OF provided resources 401 * to see if we have DMA resources provided already. In this case 402 * there is no need to update the resources for the device, we use the 403 * OF provided ones. 404 * 405 * TODO: Once DMA resource is available from OF layer, we should 406 * kill filling any resources from hwmod. 407 */
Ok thanks, we'll add it in.
Quoted 10 lines
Quoted 3 lines
Quoted 2 lines
I will test the whole patch series today and update you.
I just booted up the EVM with all the patches you have submitted recently, There are two issues I can see,
1. Stack dump from MMC driver.
This happens because you do not have "interrupt" property mentioned In the dts file. I have added "interrupt" property and dump went away.
Quoted 5 lines
2. And MMC rootFS mount is
__not__working for me.3. I get following error message -
[ 2.118207] omap_hsmmc mmc.3: unable to obtain RX DMA engine channel 25
See below, you don't have CONFIG_EDMA on most likely.
Quoted 89 lines
I haven’t debugged it yet, just thought I should report it before Proceeding further.
Boot Log:
======================================U-Boot# mmc rescan 0
U-Boot# fatload mmc 0 82000000 uImage reading uImage
4026992 bytes read in 441 ms (8.7 MiB/s) U-Boot# fatload mmc 0 81000000 am335x-evm.dtb reading am335x-evm.dtb
11371 bytes read in 10 ms (1.1 MiB/s) U-Boot# run mmcargs
U-Boot# bootm 82000000 - 81000000
## Booting kernel from Legacy Image at 82000000 ...Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4026928 Bytes = 3.8 MiBLoad Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
Booting using the fdt blob at0x81000000Loading Kernel Image ... OK
OK
Using Device Tree in place at 81000000, end81005c6aStarting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.9.0-rc1-00122-g106e3c6 (XXX@psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 SMP Thu Mar 7 16:57:39 IST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x EVM [ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c181d000 s13632 r8192 d15040 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260368 [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait ip=none [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 1008260k/1008260k available, 40316k reserved, 269312K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc071fa34 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0775540 ( 342 kB) [ 0.000000] .data : 0xc0776000 - 0xc080f0e0 ( 613 kB) [ 0.000000] .bss : 0xc080f0e0 - 0xc0d6a348 (5485 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000989] Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208) [ 0.109762] pid_max: default: 32768 minimum: 301 [ 0.110250] Security Framework initialized [ 0.110399] Mount-cache hash table entries: 512 [ 0.121898] CPU: Testing write buffer coherency: ok [ 0.123398] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.123476] Setting up static identity map for 0xc0510518 - 0xc0510588 [ 0.126105] Brought up 1 CPUs [ 0.126130] SMP: Total of 1 processors activated (530.84 BogoMIPS). [ 0.126142] CPU: All CPU(s) started in SVC mode.
Quoted 8 lines
[ 0.129134] devtmpfs: initialized [ 0.199323] pinctrl core: initialized pinctrl subsystem [ 0.205505] regulator-dummy: no parameters [ 0.209247] NET: Registered protocol family 16 [ 0.217051] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236271] platform 49000000.edma: alias fck already exists [ 0.236311] platform 49000000.edma: alias fck already exists [ 0.236333] platform 49000000.edma: alias fck already exists
This is from the private edma api.
Quoted 6 lines
[ 0.241486] OMAP GPIO hardware version 0.1 [ 0.265045] No ATAGs? [ 0.265073] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.271061] Serial: AMBA PL011 UART driver [ 0.329077] bio: create slab <bio-0> at 0 [ 0.406141] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
Only OMAP dmaengine driver appears to be built in.
Quoted 81 lines
[ 0.408010] vbat: 5000 mV [ 0.409244] lis3_reg: no parameters [ 0.417237] SCSI subsystem initialized [ 0.419384] usbcore: registered new interface driver usbfs [ 0.420409] usbcore: registered new interface driver hub [ 0.421312] usbcore: registered new device driver usb [ 0.423218] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19 [ 0.425064] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.427105] tps65910 0-002d: No interrupt support, no core IRQ [ 0.433470] vrtc: 1800 mV [ 0.433880] vrtc: supplied by vbat [ 0.437014] vio: at 1500 mV [ 0.437157] vio: supplied by vbat [ 0.440177] vdd_mpu: 912 <--> 1312 mV at 1262 mV [ 0.440331] vdd_mpu: supplied by vbat [ 0.443151] vdd_core: 912 <--> 1150 mV at 1137 mV [ 0.443293] vdd_core: supplied by vbat [ 0.445806] vdd3: 5000 mV [ 0.448346] vdig1: at 1800 mV [ 0.448486] vdig1: supplied by vbat [ 0.451824] vdig2: at 1800 mV [ 0.451967] vdig2: supplied by vbat [ 0.454524] vpll: at 1800 mV [ 0.454652] vpll: supplied by vbat [ 0.457185] vdac: at 1800 mV [ 0.457311] vdac: supplied by vbat [ 0.459975] vaux1: at 1800 mV [ 0.460112] vaux1: supplied by vbat [ 0.462698] vaux2: at 3300 mV [ 0.462830] vaux2: supplied by vbat [ 0.465339] vaux33: at 3300 mV [ 0.465466] vaux33: supplied by vbat [ 0.467947] vmmc: omap_i2c 4802a000.i2c: did not get pins for i2c error: -19 [ 0.471641] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.482881] Switching to clocksource gp_timer [ 0.607600] NET: Registered protocol family 2 [ 0.609603] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.609956] TCP bind hash table entries: 8192 (order: 6, 294912 bytes) [ 0.613521] TCP: Hash tables configured (established 8192 bind 8192) [ 0.613821] TCP: reno registered [ 0.613863] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.614323] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) [ 0.615553] NET: Registered protocol family 1 [ 0.617700] RPC: Registered named UNIX socket transport module. [ 0.617727] RPC: Registered udp transport module. [ 0.617739] RPC: Registered tcp transport module. [ 0.617752] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.618827] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.619316] CPU PMU: probing PMU on CPU 0 [ 0.619350] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.776940] bounce pool size: 64 pages [ 0.777782] VFS: Disk quotas dquot_6.5.2 [ 0.777995] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.780682] NFS: Registering the id_resolver key type [ 0.781239] Key type id_resolver registered [ 0.781263] Key type id_legacy registered [ 0.781406] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.781933] msgmni has been set to 1475 [ 0.785529] io scheduler noop registered [ 0.785553] io scheduler deadline registered [ 0.785652] io scheduler cfq registered (default) [ 0.787072] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.791600] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.798575] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.799200] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.549008] console [ttyO0] enabled [ 1.586206] brd: module loaded [ 1.608954] loop: module loaded [ 1.617979] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.626230] OneNAND driver initializing [ 1.636711] usbcore: registered new interface driver asix [ 1.642874] usbcore: registered new interface driver ax88179_178a [ 1.650170] usbcore: registered new interface driver cdc_ether [ 1.657216] usbcore: registered new interface driver smsc95xx [ 1.663954] usbcore: registered new interface driver net1080 [ 1.670358] usbcore: registered new interface driver cdc_subset [ 1.677253] usbcore: registered new interface driver zaurus [ 1.683851] usbcore: registered new interface driver cdc_ncm [ 1.691998] usbcore: registered new interface driver cdc_wdm [ 1.698149] Initializing USB Mass Storage driver... [ 1.703927] usbcore: registered new interface driver usb-storage
Quoted 8 lines
[ 1.710287] USB Mass Storage support registered. [ 1.715804] usbcore: registered new interface driver usbtest [ 1.724258] mousedev: PS/2 mouse device common for all mice [ 1.735860] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.745083] i2c /dev entries driver [ 1.751902] Driver for 1-wire Dallas network protocol. [ 1.762053] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.773746] omap-dma-engine omap-dma-engine: allocating channel for 25
Because the EDMA DMA engine driver isn't active, the driver tries to use the OMAP DMA engine driver.
Quoted 50 lines
[ 1.780741] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 1.786477] lock: dma_chan_lock+0x0/0x20, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 1.795523] [<c001acb8>] (unwind_backtrace+0x0/0xf0) from [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) [ 1.805284] [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) from [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) [ 1.815692] [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c0040450>] (omap_request_dma+0x24/0x1b8) [ 1.826014] [<c0040450>] (omap_request_dma+0x24/0x1b8) from [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50) [ 1.836970] [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50) from [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) [ 1.847457] [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) from [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) [ 1.857322] [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) from [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) [ 1.867732] [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) from [<c0339dc4>] (platform_drv_probe+0x18/0x1c) [ 1.877767] [<c0339dc4>] (platform_drv_probe+0x18/0x1c) from [<c0338a68>] (really_probe+0x74/0x200) [ 1.887342] [<c0338a68>] (really_probe+0x74/0x200) from [<c0338d0c>] (driver_probe_device+0x30/0x48) [ 1.897010] [<c0338d0c>] (driver_probe_device+0x30/0x48) from [<c0338db8>] (__driver_attach+0x94/0x98) [ 1.906860] [<c0338db8>] (__driver_attach+0x94/0x98) from [<c0337424>] (bus_for_each_dev+0x64/0x88) [ 1.916433] [<c0337424>] (bus_for_each_dev+0x64/0x88) from [<c03383a8>] (bus_add_driver+0x1c0/0x240) [ 1.926098] [<c03383a8>] (bus_add_driver+0x1c0/0x240) from [<c03392ec>] (driver_register+0x78/0x144) [ 1.935758] [<c03392ec>] (driver_register+0x78/0x144) from [<c00086a4>] (do_one_initcall+0x34/0x180) [ 1.945432] [<c00086a4>] (do_one_initcall+0x34/0x180) from [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) [ 1.955553] [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) from [<c0502664>] (kernel_init+0x8/0xe4) [ 1.965139] [<c0502664>] (kernel_init+0x8/0xe4) from [<c00133f0>] (ret_from_fork+0x14/0x24) [ 1.974061] omap_hsmmc mmc.3: unable to obtain RX DMA engine channel 25 [ 1.982218] ledtrig-cpu: registered to indicate activity on CPUs [ 1.989997] usbcore: registered new interface driver usbhid [ 1.995997] usbhid: USB HID core driver [ 2.001076] oprofile: using arm/armv7 [ 2.005481] TCP: cubic registered [ 2.008992] Initializing XFRM netlink socket [ 2.013601] NET: Registered protocol family 17 [ 2.018370] NET: Registered protocol family 15 [ 2.023292] Key type dns_resolver registered [ 2.027918] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.036074] ThumbEE CPU extension supported. [ 2.103314] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.109789] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.117400] libphy: 4a101000.mdio: probed [ 2.121661] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 2.130442] Random MACID = aa:e0:1c:4f:40:25 [ 2.137280] of_get_named_gpio_flags exited with status 2 [ 2.143115] of_get_named_gpio_flags exited with status 3 [ 2.149951] input: volume_keys.7 as /devices/volume_keys.7/input/input0 [ 2.158349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 2.168602] Waiting for root device /dev/mmcblk0p2...Thanks.
Vaibhav
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 8 lines · Matt Porter
Quoted 5 lines · Vaibhav Hiremath
2. And MMC rootFS mount is
__not__working for me.3. I get following error message -
[ 2.118207] omap_hsmmc mmc.3: unable to obtain RX DMA engine channel 25See below, you don't have
CONFIG_EDMAon most likely.
That's CONFIG_TI_EDMA, of course.
-Matt
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
In reply to Matt PorterQuoted 231 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 136 lines
Quoted 136 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 7 lines · Vaibhav Hiremath
Quoted 7 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List;Linux
Quoted 6 lines
Quoted 6 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Quoted 7 lines
Quoted 7 lines
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28++++++++++++++++++++++++++++
Quoted 105 lines
Quoted 94 lines
4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator at 5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator at 12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +17
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc at 48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc at 481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>;arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 10 lines
arch/arm/boot/dts/am33xx.dtsi +10
-0+ dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc at 47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };Any specific reason why you did not add edma entry here as well?
Quoted 1 line
Quoted 1 line
Yes, I've answered this one before and I think this illustrates a
need
Quoted 1 line
Quoted 1 line
for a comment in the .dtsi. mmc3 edma event are on the crossbar and
so
Quoted 1 line
Quoted 1 line
the event that will be mapped is system-specific. Since Luca is
still
Quoted 1 line
Quoted 1 line
working on DT support for WiLink, there's no way to show an example
of
Quoted 5 lines
Quoted 5 lines
how this is used upstream as that's the only in-kernel user.
I have a test driver I've cited in the postings that shows how the crossbar is configured via the board .dts. It doesn't belong in the .dtsi, however, in this case. When WiLink DT support is ready we
can
Quoted 5 lines
Quoted 5 lines
have an entry in the
am335x-evmsk.dtsthat shows this case.Quoted 1 line
Also, I wonder why "interrupt" property is not coming here, I
understand
Quoted 1 line
That hwmod is filling the gap here; but I would still recommend
you
Quoted 4 lines
Quoted 4 lines
to complete
Quoted 1 line
The DT node, as we only support DT boot.
Yeah, I only added needed properties so as to not confuse people as
to
Quoted 2 lines
Quoted 2 lines
where the interrupt resources are coming from. If you feel strongly about this I don't have a problem with adding unused data in the
dts.
Quoted 1 line
Quoted 1 line
I suppose this will help clear things to have a switch away from
using
Quoted 4 lines
Quoted 1 line
the hwmod data.
Its not true, if you specify interrupt property in the DTS file It is being used. Please refer to the
omap_device.cfile. I ampasting
Quoted 6 lines
Comments from code for your reference -
389 /*
390 * Non-DT Boot:
391 * Here,pdev->num_resources= 0, and we should get allthe
Quoted 4 lines
392 * resources from hwmod. 393 * 394 * DT Boot: 395 * OF framework will construct the resource structure(currently
Quoted 1 line
396 * does for MEM & IRQ resource) and we should
respect/use these
Quoted 2 lines
397 * resources, killing hwmod dependency. 398 * If pdev->num_resources > 0, we assume that MEM & IRQresources
Quoted 1 line
399 * have been allocated by OF layer already (through
DTB).
Quoted 1 line
400 * As preparation for the future we examine the OF
provided resources
Quoted 1 line
401 * to see if we have DMA resources provided already. In
this case
Quoted 1 line
402 * there is no need to update the resources for the
device, we use the
Quoted 3 lines
403 * OF provided ones. 404 * 405 * TODO: Once DMA resource is available from OF layer, weshould
Quoted 2 lines
406 * kill filling any resources from hwmod.
407 */Ok thanks, we'll add it in.
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
I will test the whole patch series today and update you.
I just booted up the EVM with all the patches you have submitted
recently,
Quoted 5 lines
There are two issues I can see,
1. Stack dump from MMC driver.
This happens because you do not have "interrupt" property mentioned In the dts file. I have added "interrupt" property and dump wentaway.
Quoted 1 line
Quoted 9 lines
Quoted 5 lines
2. And MMC rootFS mount is
__not__working for me.3. I get following error message -
[ 2.118207] omap_hsmmc mmc.3: unable to obtain RX DMA enginechannel 25
See below, you don't have
CONFIG_EDMAon most likely.
I believe you meant "CONFIG_TI_EDMA" right?
Yes, I just enabled it and the result is still same.
[root at arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root at arago /]# [root at arago /]# [root at arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
[root at arago /]#
[root at arago /]#
Thanks,
Vaibhav
Quoted 315 lines
Quoted 29 lines
I haven?t debugged it yet, just thought I should report it before Proceeding further.
Boot Log:
======================================U-Boot# mmc rescan 0
U-Boot# fatload mmc 0 82000000 uImage reading uImage
4026992 bytes read in 441 ms (8.7 MiB/s) U-Boot# fatload mmc 0 81000000 am335x-evm.dtb reading am335x-evm.dtb
11371 bytes read in 10 ms (1.1 MiB/s) U-Boot# run mmcargs
U-Boot# bootm 82000000 - 81000000
## Booting kernel from Legacy Image at 82000000 ...Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4026928 Bytes = 3.8 MiBLoad Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
Booting using the fdt blob at0x81000000Loading Kernel Image ... OK
OK
Using Device Tree in place at 81000000, end81005c6aQuoted 4 lines
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.9.0-rc1-00122-g106e3c6(XXX at psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 SMP Thu Mar 7 16:57:39 IST 2013
Quoted 1 line
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),cr=10c53c7d
Quoted 1 line
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasinginstruction cache
Quoted 1 line
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree),model: TI AM335x EVM
Quoted 5 lines
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c181d000 s13632 r8192d15040 u36864
Quoted 1 line
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 260368
Quoted 1 line
[ 0.000000] Kernel command line: console=ttyO0,115200n8root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait ip=none
Quoted 2 lines
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,524288 bytes)
Quoted 1 line
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6,262144 bytes)
Quoted 3 lines
[ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 1008260k/1008260k available, 40316k reserved,269312K highmem
Quoted 7 lines
[ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)Quoted 8 lines
[ 0.000000] .text : 0xc0008000 - 0xc071fa34 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0775540 ( 342 kB) [ 0.000000] .data : 0xc0776000 - 0xc080f0e0 ( 613 kB) [ 0.000000] .bss : 0xc080f0e0 - 0xc0d6a348 (5485 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with128 interrupts
Quoted 3 lines
[ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wrapsevery 178956ms
Quoted 3 lines
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,Inc., Ingo Molnar
Quoted 10 lines
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000989] Calibrating delay loop... 530.84 BogoMIPS(lpj=2654208)
Quoted 6 lines
[ 0.109762] pid_max: default: 32768 minimum: 301 [ 0.110250] Security Framework initialized [ 0.110399] Mount-cache hash table entries: 512 [ 0.121898] CPU: Testing write buffer coherency: ok [ 0.123398] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.123476] Setting up static identity map for 0xc0510518 -
0xc0510588Quoted 2 lines
[ 0.126105] Brought up 1 CPUs [ 0.126130] SMP: Total of 1 processors activated (530.84BogoMIPS).
Quoted 6 lines
[ 0.126142] CPU: All CPU(s) started in SVC mode. [ 0.129134] devtmpfs: initialized [ 0.199323] pinctrl core: initialized pinctrl subsystem [ 0.205505] regulator-dummy: no parameters [ 0.209247] NET: Registered protocol family 16 [ 0.217051] DMA: preallocated 256 KiB pool for atomic coherentallocations
Quoted 3 lines
[ 0.236271] platform 49000000.edma: alias fck already exists [ 0.236311] platform 49000000.edma: alias fck already exists [ 0.236333] platform 49000000.edma: alias fck already existsThis is from the private edma api.
Quoted 6 lines
[ 0.241486] OMAP GPIO hardware version 0.1 [ 0.265045] No ATAGs? [ 0.265073] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.271061] Serial: AMBA PL011 UART driver [ 0.329077] bio: create slab <bio-0> at 0 [ 0.406141] omap-dma-engine omap-dma-engine: OMAP DMA enginedriver
Only OMAP dmaengine driver appears to be built in.
Quoted 7 lines
[ 0.408010] vbat: 5000 mV [ 0.409244] lis3_reg: no parameters [ 0.417237] SCSI subsystem initialized [ 0.419384] usbcore: registered new interface driver usbfs [ 0.420409] usbcore: registered new interface driver hub [ 0.421312] usbcore: registered new device driver usb [ 0.423218] omap_i2c 44e0b000.i2c: did not get pins for i2c error:-19
Quoted 18 lines
[ 0.425064] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.427105] tps65910 0-002d: No interrupt support, no core IRQ [ 0.433470] vrtc: 1800 mV [ 0.433880] vrtc: supplied by vbat [ 0.437014] vio: at 1500 mV [ 0.437157] vio: supplied by vbat [ 0.440177] vdd_mpu: 912 <--> 1312 mV at 1262 mV [ 0.440331] vdd_mpu: supplied by vbat [ 0.443151] vdd_core: 912 <--> 1150 mV at 1137 mV [ 0.443293] vdd_core: supplied by vbat [ 0.445806] vdd3: 5000 mV [ 0.448346] vdig1: at 1800 mV [ 0.448486] vdig1: supplied by vbat [ 0.451824] vdig2: at 1800 mV [ 0.451967] vdig2: supplied by vbat [ 0.454524] vpll: at 1800 mV [ 0.454652] vpll: supplied by vbat [ 0.457185] vdac: at 1800 mVQuoted 8 lines
[ 0.457311] vdac: supplied by vbat [ 0.459975] vaux1: at 1800 mV [ 0.460112] vaux1: supplied by vbat [ 0.462698] vaux2: at 3300 mV [ 0.462830] vaux2: supplied by vbat [ 0.465339] vaux33: at 3300 mV [ 0.465466] vaux33: supplied by vbat [ 0.467947] vmmc: omap_i2c 4802a000.i2c: did not get pins for i2cerror: -19
Quoted 4 lines
[ 0.471641] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.482881] Switching to clocksource gp_timer [ 0.607600] NET: Registered protocol family 2 [ 0.609603] TCP established hash table entries: 8192 (order: 4,65536 bytes)
Quoted 1 line
[ 0.609956] TCP bind hash table entries: 8192 (order: 6, 294912bytes)
Quoted 1 line
[ 0.613521] TCP: Hash tables configured (established 8192 bind8192)
Quoted 3 lines
[ 0.613821] TCP: reno registered [ 0.613863] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.614323] UDP-Lite hash table entries: 512 (order: 3, 40960bytes)
Quoted 5 lines
[ 0.615553] NET: Registered protocol family 1 [ 0.617700] RPC: Registered named UNIX socket transport module. [ 0.617727] RPC: Registered udp transport module. [ 0.617739] RPC: Registered tcp transport module. [ 0.617752] RPC: Registered tcp NFSv4.1 backchannel transportmodule.
Quoted 1 line
[ 0.618827] NetWinder Floating Point Emulator V0.97 (doubleprecision)
Quoted 2 lines
[ 0.619316] CPU PMU: probing PMU on CPU 0 [ 0.619350] hw perfevents: enabled with ARMv7 Cortex-A8 PMUdriver, 5 counters available
Quoted 3 lines
[ 0.776940] bounce pool size: 64 pages [ 0.777782] VFS: Disk quotas dquot_6.5.2 [ 0.777995] Dquot-cache hash table entries: 1024 (order 0, 4096bytes)
Quoted 4 lines
[ 0.780682] NFS: Registering the id_resolver key type [ 0.781239] Key type id_resolver registered [ 0.781263] Key type id_legacy registered [ 0.781406] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 RedHat, Inc.
Quoted 5 lines
[ 0.781933] msgmni has been set to 1475 [ 0.785529] io scheduler noop registered [ 0.785553] io scheduler deadline registered [ 0.785652] io scheduler cfq registered (default) [ 0.787072] pinctrl-single 44e10800.pinmux: 142 pins at pa
f9e10800size 568Quoted 1 line
[ 0.791600] Serial: 8250/16550 driver, 4 ports, IRQ sharingenabled
Quoted 1 line
[ 0.798575] omap_uart 44e09000.serial: did not get pins for uart0error: -19
Quoted 1 line
[ 0.799200] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88)is a OMAP UART0
Quoted 4 lines
[ 1.549008] console [ttyO0] enabled [ 1.586206] brd: module loaded [ 1.608954] loop: module loaded [ 1.617979] mtdoops: mtd device (mtddev=name/number) must besupplied
Quoted 8 lines
[ 1.626230] OneNAND driver initializing [ 1.636711] usbcore: registered new interface driver asix [ 1.642874] usbcore: registered new interface driver ax88179_178a [ 1.650170] usbcore: registered new interface driver cdc_ether [ 1.657216] usbcore: registered new interface driver smsc95xx [ 1.663954] usbcore: registered new interface driver net1080 [ 1.670358] usbcore: registered new interface driver cdc_subset [ 1.677253] usbcore: registered new interface driver zaurusQuoted 8 lines
[ 1.683851] usbcore: registered new interface driver cdc_ncm [ 1.691998] usbcore: registered new interface driver cdc_wdm [ 1.698149] Initializing USB Mass Storage driver... [ 1.703927] usbcore: registered new interface driver usb-storage [ 1.710287] USB Mass Storage support registered. [ 1.715804] usbcore: registered new interface driver usbtest [ 1.724258] mousedev: PS/2 mouse device common for all mice [ 1.735860] omap_rtc 44e3e000.rtc: rtc core: registered44e3e000.rtc as rtc0
Quoted 3 lines
[ 1.745083] i2c /dev entries driver [ 1.751902] Driver for 1-wire Dallas network protocol. [ 1.762053] omap_wdt: OMAP Watchdog Timer Rev 0x01: initialtimeout 60 sec
Quoted 1 line
[ 1.773746] omap-dma-engine omap-dma-engine: allocating channelfor 25
Because the EDMA DMA engine driver isn't active, the driver tries to use
the OMAP DMA engine driver.Quoted 2 lines
[ 1.780741] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 1.786477] lock: dma_chan_lock+0x0/0x20, .magic: 00000000,.owner: <none>/-1, .owner_cpu: 0
Quoted 1 line
[ 1.795523] [<c001acb8>] (unwind_backtrace+0x0/0xf0) from[<
c02d4838>] (do_raw_spin_lock+0x15c/0x19c)Quoted 1 line
[ 1.805284] [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) from[<
c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58)Quoted 1 line
[ 1.815692] [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) from[<
c0040450>] (omap_request_dma+0x24/0x1b8)Quoted 1 line
[ 1.826014] [<c0040450>] (omap_request_dma+0x24/0x1b8) from[<
c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50)Quoted 1 line
[ 1.836970] [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50)from [<
c02fdfc8>] (dma_chan_get+0x5c/0xfc)Quoted 1 line
[ 1.847457] [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) from[<
c02fe6fc>] (__dma_request_channel+0xfc/0x1c0)Quoted 1 line
[ 1.857322] [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) from[<
c0422398>] (omap_hsmmc_probe+0x38c/0x908)Quoted 1 line
[ 1.867732] [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) from[<
c0339dc4>] (platform_drv_probe+0x18/0x1c)Quoted 1 line
[ 1.877767] [<c0339dc4>] (platform_drv_probe+0x18/0x1c) from[<
c0338a68>] (really_probe+0x74/0x200)Quoted 1 line
[ 1.887342] [<c0338a68>] (really_probe+0x74/0x200) from[<
c0338d0c>] (driver_probe_device+0x30/0x48)Quoted 1 line
[ 1.897010] [<c0338d0c>] (driver_probe_device+0x30/0x48) from[<
c0338db8>] (__driver_attach+0x94/0x98)Quoted 1 line
[ 1.906860] [<c0338db8>] (__driver_attach+0x94/0x98) from[<
c0337424>] (bus_for_each_dev+0x64/0x88)Quoted 1 line
[ 1.916433] [<c0337424>] (bus_for_each_dev+0x64/0x88) from[<
c03383a8>] (bus_add_driver+0x1c0/0x240)Quoted 1 line
[ 1.926098] [<c03383a8>] (bus_add_driver+0x1c0/0x240) from[<
c03392ec>] (driver_register+0x78/0x144)Quoted 1 line
[ 1.935758] [<c03392ec>] (driver_register+0x78/0x144) from[<
c00086a4>] (do_one_initcall+0x34/0x180)Quoted 1 line
[ 1.945432] [<c00086a4>] (do_one_initcall+0x34/0x180) from[<
c07208f8>] (kernel_init_freeable+0xfc/0x1c8)Quoted 1 line
[ 1.955553] [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) from[<
c0502664>] (kernel_init+0x8/0xe4)Quoted 1 line
[ 1.965139] [<c0502664>] (kernel_init+0x8/0xe4) from [<c00133f0>](
ret_from_fork+0x14/0x24)Quoted 1 line
[ 1.974061] omap_hsmmc mmc.3: unable to obtain RX DMA enginechannel 25
Quoted 10 lines
[ 1.982218] ledtrig-cpu: registered to indicate activity on CPUs [ 1.989997] usbcore: registered new interface driver usbhid [ 1.995997] usbhid: USB HID core driver [ 2.001076] oprofile: using arm/armv7 [ 2.005481] TCP: cubic registered [ 2.008992] Initializing XFRM netlink socket [ 2.013601] NET: Registered protocol family 17 [ 2.018370] NET: Registered protocol family 15 [ 2.023292] Key type dns_resolver registered [ 2.027918] VFP support v0.3: implementor 41 architecture 3 part30 variant c rev 3
Quoted 5 lines
[ 2.036074] ThumbEE CPU extension supported. [ 2.103314] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.109789] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.117400] libphy: 4a101000.mdio: probed [ 2.121661] davinci_mdio 4a101000.mdio: phy[0]: device4a101000.mdio:00, driver unknown
Quoted 4 lines
[ 2.130442] Random MACID = aa:e0:1c:4f:40:25 [ 2.137280] of_get_named_gpio_flags exited with status 2 [ 2.143115] of_get_named_gpio_flags exited with status 3 [ 2.149951] input: volume_keys.7 as/devices/volume_keys.7/input/input0
Quoted 1 line
[ 2.158349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
Quoted 9 lines
[ 2.168602] Waiting for root device /dev/mmcblk0p2...Thanks.
Vaibhav
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss at lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 236 lines · Vaibhav Hiremath
Quoted 236 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter,Matt
Quoted 136 lines
Quoted 136 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 7 lines · Vaibhav Hiremath
Quoted 7 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAP List;Linux
Quoted 6 lines
Quoted 6 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
Quoted 7 lines
Quoted 7 lines
Signed-off-by Matt Porter <[email protected]>Acked-by Tony Lindgren <[email protected]>--- arch/arm/boot/dts/am335x-bone.dts | 7 +++++++ arch/arm/boot/dts/am335x-evm.dts | 7 +++++++ arch/arm/boot/dts/am335x-evmsk.dts | 7 +++++++ arch/arm/boot/dts/am33xx.dtsi | 28++++++++++++++++++++++++++++
Quoted 105 lines
Quoted 94 lines
4 files changed, 49 insertions(+)arch/arm/boot/dts/am335x-bone.dts +7
-0@@ -120,6 +120,8 @@ }; ldo3_reg: regulator@5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; };@@ -136,3 +138,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo3_reg>; +};arch/arm/boot/dts/am335x-evm.dts +7
-0@@ -232,6 +232,8 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; };@@ -244,3 +246,8 @@ &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am335x-evmsk.dts +7
-0@@ -244,7 +244,14 @@ }; vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; + +&mmc1 { + status = "okay"; + vmmc-supply = <&vmmc_reg>; +};arch/arm/boot/dts/am33xx.dtsi +17
-0@@ -234,6 +234,34 @@ status = "disabled"; }; + mmc1: mmc@48060000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&edma 24 + &edma 25>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc2: mmc@481d8000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + dmas = <&edma 2 + &edma 3>;arch/arm/boot/dts/am33xx.dtsi line 263
Quoted 10 lines
arch/arm/boot/dts/am33xx.dtsi +10
-0+ dma-names = "tx", "rx"; + status = "disabled"; + }; + + mmc3: mmc@47810000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + status = "disabled"; + };Any specific reason why you did not add edma entry here as well?
Quoted 1 line
Quoted 1 line
Yes, I've answered this one before and I think this illustrates a
need
Quoted 1 line
Quoted 1 line
for a comment in the .dtsi. mmc3 edma event are on the crossbar and
so
Quoted 1 line
Quoted 1 line
the event that will be mapped is system-specific. Since Luca is
still
Quoted 1 line
Quoted 1 line
working on DT support for WiLink, there's no way to show an example
of
Quoted 5 lines
Quoted 5 lines
how this is used upstream as that's the only in-kernel user.
I have a test driver I've cited in the postings that shows how the crossbar is configured via the board .dts. It doesn't belong in the .dtsi, however, in this case. When WiLink DT support is ready we
can
Quoted 5 lines
Quoted 5 lines
have an entry in the
am335x-evmsk.dtsthat shows this case.Quoted 1 line
Also, I wonder why "interrupt" property is not coming here, I
understand
Quoted 1 line
That hwmod is filling the gap here; but I would still recommend
you
Quoted 4 lines
Quoted 4 lines
to complete
Quoted 1 line
The DT node, as we only support DT boot.
Yeah, I only added needed properties so as to not confuse people as
to
Quoted 2 lines
Quoted 2 lines
where the interrupt resources are coming from. If you feel strongly about this I don't have a problem with adding unused data in the
dts.
Quoted 1 line
Quoted 1 line
I suppose this will help clear things to have a switch away from
using
Quoted 4 lines
Quoted 1 line
the hwmod data.
Its not true, if you specify interrupt property in the DTS file It is being used. Please refer to the
omap_device.cfile. I ampasting
Quoted 6 lines
Comments from code for your reference -
389 /*
390 * Non-DT Boot:
391 * Here,pdev->num_resources= 0, and we should get allthe
Quoted 4 lines
392 * resources from hwmod. 393 * 394 * DT Boot: 395 * OF framework will construct the resource structure(currently
Quoted 1 line
396 * does for MEM & IRQ resource) and we should
respect/use these
Quoted 2 lines
397 * resources, killing hwmod dependency. 398 * If pdev->num_resources > 0, we assume that MEM & IRQresources
Quoted 1 line
399 * have been allocated by OF layer already (through
DTB).
Quoted 1 line
400 * As preparation for the future we examine the OF
provided resources
Quoted 1 line
401 * to see if we have DMA resources provided already. In
this case
Quoted 1 line
402 * there is no need to update the resources for the
device, we use the
Quoted 3 lines
403 * OF provided ones. 404 * 405 * TODO: Once DMA resource is available from OF layer, weshould
Quoted 2 lines
406 * kill filling any resources from hwmod.
407 */Ok thanks, we'll add it in.
Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
I will test the whole patch series today and update you.
I just booted up the EVM with all the patches you have submitted
recently,
Quoted 5 lines
There are two issues I can see,
1. Stack dump from MMC driver.
This happens because you do not have "interrupt" property mentioned In the dts file. I have added "interrupt" property and dump wentaway.
Quoted 6 lines
2. And MMC rootFS mount is
__not__working for me.3. I get following error message -
[ 2.118207] omap_hsmmc mmc.3: unable to obtain RX DMA engine
Quoted 8 lines
Quoted 4 lines
channel 25
See below, you don't have
CONFIG_EDMAon most likely.I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
yeah, followed up to correct that.
Quoted 15 lines
[root@arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root@arago /]# [root@arago /]# [root@arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
Quoted 2 lines
[root@arago /]#
[root@arago /]#
What's the full log now? At least that fragment you show me is better, you now have the correct dmaengine driver active.
-Matt
Quoted 315 lines
Quoted 294 lines
Quoted 25 lines
Boot Log:
======================================U-Boot# mmc rescan 0
U-Boot# fatload mmc 0 82000000 uImage reading uImage
4026992 bytes read in 441 ms (8.7 MiB/s) U-Boot# fatload mmc 0 81000000 am335x-evm.dtb reading am335x-evm.dtb
11371 bytes read in 10 ms (1.1 MiB/s) U-Boot# run mmcargs
U-Boot# bootm 82000000 - 81000000
## Booting kernel from Legacy Image at 82000000 ...Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4026928 Bytes = 3.8 MiBLoad Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
Booting using the fdt blob at0x81000000Loading Kernel Image ... OK
OK
Using Device Tree in place at 81000000, end81005c6aQuoted 4 lines
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.9.0-rc1-00122-g106e3c6(XXX@psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #2 SMP Thu Mar 7 16:57:39 IST 2013
Quoted 1 line
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),cr=10c53c7d
Quoted 1 line
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasinginstruction cache
Quoted 1 line
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree),model: TI AM335x EVM
Quoted 5 lines
[ 0.000000] cma: CMA: reserved 16 MiB at ae800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c181d000 s13632 r8192d15040 u36864
Quoted 1 line
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 260368
Quoted 1 line
[ 0.000000] Kernel command line: console=ttyO0,115200n8root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait ip=none
Quoted 2 lines
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,524288 bytes)
Quoted 1 line
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6,262144 bytes)
Quoted 3 lines
[ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 1023MB = 1023MB total [ 0.000000] Memory: 1008260k/1008260k available, 40316k reserved,269312K highmem
Quoted 7 lines
[ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)Quoted 8 lines
[ 0.000000] .text : 0xc0008000 - 0xc071fa34 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0775540 ( 342 kB) [ 0.000000] .data : 0xc0776000 - 0xc080f0e0 ( 613 kB) [ 0.000000] .bss : 0xc080f0e0 - 0xc0d6a348 (5485 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with128 interrupts
Quoted 3 lines
[ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wrapsevery 178956ms
Quoted 3 lines
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat,Inc., Ingo Molnar
Quoted 10 lines
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000989] Calibrating delay loop... 530.84 BogoMIPS(lpj=2654208)
Quoted 6 lines
[ 0.109762] pid_max: default: 32768 minimum: 301 [ 0.110250] Security Framework initialized [ 0.110399] Mount-cache hash table entries: 512 [ 0.121898] CPU: Testing write buffer coherency: ok [ 0.123398] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.123476] Setting up static identity map for 0xc0510518 -
0xc0510588Quoted 2 lines
[ 0.126105] Brought up 1 CPUs [ 0.126130] SMP: Total of 1 processors activated (530.84BogoMIPS).
Quoted 6 lines
[ 0.126142] CPU: All CPU(s) started in SVC mode. [ 0.129134] devtmpfs: initialized [ 0.199323] pinctrl core: initialized pinctrl subsystem [ 0.205505] regulator-dummy: no parameters [ 0.209247] NET: Registered protocol family 16 [ 0.217051] DMA: preallocated 256 KiB pool for atomic coherentallocations
Quoted 3 lines
[ 0.236271] platform 49000000.edma: alias fck already exists [ 0.236311] platform 49000000.edma: alias fck already exists [ 0.236333] platform 49000000.edma: alias fck already existsThis is from the private edma api.
Quoted 6 lines
[ 0.241486] OMAP GPIO hardware version 0.1 [ 0.265045] No ATAGs? [ 0.265073] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.271061] Serial: AMBA PL011 UART driver [ 0.329077] bio: create slab <bio-0> at 0 [ 0.406141] omap-dma-engine omap-dma-engine: OMAP DMA enginedriver
Only OMAP dmaengine driver appears to be built in.
Quoted 7 lines
[ 0.408010] vbat: 5000 mV [ 0.409244] lis3_reg: no parameters [ 0.417237] SCSI subsystem initialized [ 0.419384] usbcore: registered new interface driver usbfs [ 0.420409] usbcore: registered new interface driver hub [ 0.421312] usbcore: registered new device driver usb [ 0.423218] omap_i2c 44e0b000.i2c: did not get pins for i2c error:-19
Quoted 18 lines
[ 0.425064] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.427105] tps65910 0-002d: No interrupt support, no core IRQ [ 0.433470] vrtc: 1800 mV [ 0.433880] vrtc: supplied by vbat [ 0.437014] vio: at 1500 mV [ 0.437157] vio: supplied by vbat [ 0.440177] vdd_mpu: 912 <--> 1312 mV at 1262 mV [ 0.440331] vdd_mpu: supplied by vbat [ 0.443151] vdd_core: 912 <--> 1150 mV at 1137 mV [ 0.443293] vdd_core: supplied by vbat [ 0.445806] vdd3: 5000 mV [ 0.448346] vdig1: at 1800 mV [ 0.448486] vdig1: supplied by vbat [ 0.451824] vdig2: at 1800 mV [ 0.451967] vdig2: supplied by vbat [ 0.454524] vpll: at 1800 mV [ 0.454652] vpll: supplied by vbat [ 0.457185] vdac: at 1800 mVQuoted 8 lines
[ 0.457311] vdac: supplied by vbat [ 0.459975] vaux1: at 1800 mV [ 0.460112] vaux1: supplied by vbat [ 0.462698] vaux2: at 3300 mV [ 0.462830] vaux2: supplied by vbat [ 0.465339] vaux33: at 3300 mV [ 0.465466] vaux33: supplied by vbat [ 0.467947] vmmc: omap_i2c 4802a000.i2c: did not get pins for i2cerror: -19
Quoted 4 lines
[ 0.471641] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.482881] Switching to clocksource gp_timer [ 0.607600] NET: Registered protocol family 2 [ 0.609603] TCP established hash table entries: 8192 (order: 4,65536 bytes)
Quoted 1 line
[ 0.609956] TCP bind hash table entries: 8192 (order: 6, 294912bytes)
Quoted 1 line
[ 0.613521] TCP: Hash tables configured (established 8192 bind8192)
Quoted 3 lines
[ 0.613821] TCP: reno registered [ 0.613863] UDP hash table entries: 512 (order: 3, 40960 bytes) [ 0.614323] UDP-Lite hash table entries: 512 (order: 3, 40960bytes)
Quoted 5 lines
[ 0.615553] NET: Registered protocol family 1 [ 0.617700] RPC: Registered named UNIX socket transport module. [ 0.617727] RPC: Registered udp transport module. [ 0.617739] RPC: Registered tcp transport module. [ 0.617752] RPC: Registered tcp NFSv4.1 backchannel transportmodule.
Quoted 1 line
[ 0.618827] NetWinder Floating Point Emulator V0.97 (doubleprecision)
Quoted 2 lines
[ 0.619316] CPU PMU: probing PMU on CPU 0 [ 0.619350] hw perfevents: enabled with ARMv7 Cortex-A8 PMUdriver, 5 counters available
Quoted 3 lines
[ 0.776940] bounce pool size: 64 pages [ 0.777782] VFS: Disk quotas dquot_6.5.2 [ 0.777995] Dquot-cache hash table entries: 1024 (order 0, 4096bytes)
Quoted 4 lines
[ 0.780682] NFS: Registering the id_resolver key type [ 0.781239] Key type id_resolver registered [ 0.781263] Key type id_legacy registered [ 0.781406] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 RedHat, Inc.
Quoted 5 lines
[ 0.781933] msgmni has been set to 1475 [ 0.785529] io scheduler noop registered [ 0.785553] io scheduler deadline registered [ 0.785652] io scheduler cfq registered (default) [ 0.787072] pinctrl-single 44e10800.pinmux: 142 pins at pa
f9e10800size 568Quoted 1 line
[ 0.791600] Serial: 8250/16550 driver, 4 ports, IRQ sharingenabled
Quoted 1 line
[ 0.798575] omap_uart 44e09000.serial: did not get pins for uart0error: -19
Quoted 1 line
[ 0.799200] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88)is a OMAP UART0
Quoted 4 lines
[ 1.549008] console [ttyO0] enabled [ 1.586206] brd: module loaded [ 1.608954] loop: module loaded [ 1.617979] mtdoops: mtd device (mtddev=name/number) must besupplied
Quoted 8 lines
[ 1.626230] OneNAND driver initializing [ 1.636711] usbcore: registered new interface driver asix [ 1.642874] usbcore: registered new interface driver ax88179_178a [ 1.650170] usbcore: registered new interface driver cdc_ether [ 1.657216] usbcore: registered new interface driver smsc95xx [ 1.663954] usbcore: registered new interface driver net1080 [ 1.670358] usbcore: registered new interface driver cdc_subset [ 1.677253] usbcore: registered new interface driver zaurusQuoted 8 lines
[ 1.683851] usbcore: registered new interface driver cdc_ncm [ 1.691998] usbcore: registered new interface driver cdc_wdm [ 1.698149] Initializing USB Mass Storage driver... [ 1.703927] usbcore: registered new interface driver usb-storage [ 1.710287] USB Mass Storage support registered. [ 1.715804] usbcore: registered new interface driver usbtest [ 1.724258] mousedev: PS/2 mouse device common for all mice [ 1.735860] omap_rtc 44e3e000.rtc: rtc core: registered44e3e000.rtc as rtc0
Quoted 3 lines
[ 1.745083] i2c /dev entries driver [ 1.751902] Driver for 1-wire Dallas network protocol. [ 1.762053] omap_wdt: OMAP Watchdog Timer Rev 0x01: initialtimeout 60 sec
Quoted 1 line
[ 1.773746] omap-dma-engine omap-dma-engine: allocating channelfor 25
Because the EDMA DMA engine driver isn't active, the driver tries to use
the OMAP DMA engine driver.Quoted 2 lines
[ 1.780741] BUG: spinlock bad magic on CPU#0, swapper/0/1 [ 1.786477] lock: dma_chan_lock+0x0/0x20, .magic: 00000000,.owner: <none>/-1, .owner_cpu: 0
Quoted 1 line
[ 1.795523] [<c001acb8>] (unwind_backtrace+0x0/0xf0) from[<
c02d4838>] (do_raw_spin_lock+0x15c/0x19c)Quoted 1 line
[ 1.805284] [<c02d4838>] (do_raw_spin_lock+0x15c/0x19c) from[<
c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58)Quoted 1 line
[ 1.815692] [<c050a93c>] (_raw_spin_lock_irqsave+0x4c/0x58) from[<
c0040450>] (omap_request_dma+0x24/0x1b8)Quoted 1 line
[ 1.826014] [<c0040450>] (omap_request_dma+0x24/0x1b8) from[<
c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50)Quoted 1 line
[ 1.836970] [<c02ffca8>] (omap_dma_alloc_chan_resources+0x3c/0x50)from [<
c02fdfc8>] (dma_chan_get+0x5c/0xfc)Quoted 1 line
[ 1.847457] [<c02fdfc8>] (dma_chan_get+0x5c/0xfc) from[<
c02fe6fc>] (__dma_request_channel+0xfc/0x1c0)Quoted 1 line
[ 1.857322] [<c02fe6fc>] (__dma_request_channel+0xfc/0x1c0) from[<
c0422398>] (omap_hsmmc_probe+0x38c/0x908)Quoted 1 line
[ 1.867732] [<c0422398>] (omap_hsmmc_probe+0x38c/0x908) from[<
c0339dc4>] (platform_drv_probe+0x18/0x1c)Quoted 1 line
[ 1.877767] [<c0339dc4>] (platform_drv_probe+0x18/0x1c) from[<
c0338a68>] (really_probe+0x74/0x200)Quoted 1 line
[ 1.887342] [<c0338a68>] (really_probe+0x74/0x200) from[<
c0338d0c>] (driver_probe_device+0x30/0x48)Quoted 1 line
[ 1.897010] [<c0338d0c>] (driver_probe_device+0x30/0x48) from[<
c0338db8>] (__driver_attach+0x94/0x98)Quoted 1 line
[ 1.906860] [<c0338db8>] (__driver_attach+0x94/0x98) from[<
c0337424>] (bus_for_each_dev+0x64/0x88)Quoted 1 line
[ 1.916433] [<c0337424>] (bus_for_each_dev+0x64/0x88) from[<
c03383a8>] (bus_add_driver+0x1c0/0x240)Quoted 1 line
[ 1.926098] [<c03383a8>] (bus_add_driver+0x1c0/0x240) from[<
c03392ec>] (driver_register+0x78/0x144)Quoted 1 line
[ 1.935758] [<c03392ec>] (driver_register+0x78/0x144) from[<
c00086a4>] (do_one_initcall+0x34/0x180)Quoted 1 line
[ 1.945432] [<c00086a4>] (do_one_initcall+0x34/0x180) from[<
c07208f8>] (kernel_init_freeable+0xfc/0x1c8)Quoted 1 line
[ 1.955553] [<c07208f8>] (kernel_init_freeable+0xfc/0x1c8) from[<
c0502664>] (kernel_init+0x8/0xe4)Quoted 1 line
[ 1.965139] [<c0502664>] (kernel_init+0x8/0xe4) from [<c00133f0>](
ret_from_fork+0x14/0x24)Quoted 1 line
[ 1.974061] omap_hsmmc mmc.3: unable to obtain RX DMA enginechannel 25
Quoted 10 lines
[ 1.982218] ledtrig-cpu: registered to indicate activity on CPUs [ 1.989997] usbcore: registered new interface driver usbhid [ 1.995997] usbhid: USB HID core driver [ 2.001076] oprofile: using arm/armv7 [ 2.005481] TCP: cubic registered [ 2.008992] Initializing XFRM netlink socket [ 2.013601] NET: Registered protocol family 17 [ 2.018370] NET: Registered protocol family 15 [ 2.023292] Key type dns_resolver registered [ 2.027918] VFP support v0.3: implementor 41 architecture 3 part30 variant c rev 3
Quoted 5 lines
[ 2.036074] ThumbEE CPU extension supported. [ 2.103314] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.109789] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.117400] libphy: 4a101000.mdio: probed [ 2.121661] davinci_mdio 4a101000.mdio: phy[0]: deviceQuoted 17 lines
4a101000.mdio:00, driver unknown
Quoted 4 lines
[ 2.130442] Random MACID = aa:e0:1c:4f:40:25 [ 2.137280] of_get_named_gpio_flags exited with status 2 [ 2.143115] of_get_named_gpio_flags exited with status 3 [ 2.149951] input: volume_keys.7 as/devices/volume_keys.7/input/input0
Quoted 1 line
[ 2.158349] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
Quoted 9 lines
[ 2.168602] Waiting for root device /dev/mmcblk0p2...Thanks.
Vaibhav
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 55 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 8:31 PM
To: Hiremath, Vaibhav
Cc: Chris Ball; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Linux OMAP List; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines · Vaibhav Hiremath
Quoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 3 lines
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 7 lines
Quoted 7 lines
ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf OfPorter,
Quoted 5 lines
Quoted 5 lines
Matt
Quoted 4 lines
Quoted 4 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM KernelList;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportOn Thu, Mar 07, 2013 at 05:29:24AM +0000, Vaibhav Hiremath
Quoted 5 lines · wrote:
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit;Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAPList;
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Linux
Quoted 6 lines
Quoted 6 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC supportAdds AM33XX MMC support for am335x-bone, am335x-evm, and am335x-evmsk.
<snip>
Quoted 4 lines
What's the full log now? At least that fragment you show me is better, you now have the correct dmaengine driver active.
Here we go.....
Boot Log:
==========================
U-Boot# mmc rescan 0
U-Boot# fatload mmc 0 80000000 am335x-evm.dtb
reading am335x-evm.dtb
11419 bytes read in 10 ms (1.1 MiB/s)
U-Boot# fatload mmc 0 81000000 uImage
reading uImage
4029168 bytes read in 441 ms (8.7 MiB/s)
U-Boot# fatload mmc 0 82000000 ramdisk.ext2.gz
reading ramdisk.ext2.gz
3274441 bytes read in 363 ms (8.6 MiB/s)
U-Boot# setenv bootargs mem=256M console=ttyO0,115200n8 root=/dev/ram rw initrd=0x82000000,16MB ramdisk_size=65536 earlyprintk=serial omap_debugss_en U-Boot# bootm 81000000 - 80000000
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-3.9.0-rc1-00124-g68f2d92-d Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4029104 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80000000
Booting using the fdt blob at 0x80000000 Loading Kernel Image ... OK
OK
Using Device Tree in place at 80000000, end 80005c9a
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.9.0-rc1-00124-g68f2d92-dirty (XXX at psplinux064) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #5 SMP Thu Mar 7 20:19:23 IST 2013 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x EVM [ 0.000000] cma: CMA: reserved 16 MiB at 8e800000 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] AM335X ES2.0 (neon ) [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0f75000 s13632 r8192 d15040 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 [ 0.000000] Kernel command line: mem=256M console=ttyO0,115200n8 root=/dev/ram rw initrdD hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Memory: 255MB = 255MB total [ 0.000000] Memory: 212236k/212236k available, 49908k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc071fa94 (7263 kB) [ 0.000000] .init : 0xc0720000 - 0xc0775540 ( 342 kB) [ 0.000000] .data : 0xc0776000 - 0xc080f120 ( 613 kB) [ 0.000000] .bss : 0xc080f120 - 0xc0d6a3c8 (5485 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3695 kB [ 0.000000] per task-struct memory footprint: 1152 bytes [ 0.000973] Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208) [ 0.109762] pid_max: default: 32768 minimum: 301 [ 0.110242] Security Framework initialized [ 0.110391] Mount-cache hash table entries: 512 [ 0.121881] CPU: Testing write buffer coherency: ok [ 0.123371] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.123454] Setting up static identity map for 0xc0511298 - 0xc0511308 [ 0.126104] Brought up 1 CPUs [ 0.126131] SMP: Total of 1 processors activated (530.84 BogoMIPS). [ 0.126142] CPU: All CPU(s) started in SVC mode. [ 0.129122] devtmpfs: initialized [ 0.199318] pinctrl core: initialized pinctrl subsystem [ 0.205542] regulator-dummy: no parameters [ 0.209272] NET: Registered protocol family 16 [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.241540] OMAP GPIO hardware version 0.1 [ 0.265323] No ATAGs? [ 0.265352] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.271325] Serial: AMBA PL011 UART driver [ 0.329532] bio: create slab <bio-0> at 0 [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driver [ 0.447019] vbat: 5000 mV [ 0.448222] lis3_reg: no parameters [ 0.455418] SCSI subsystem initialized [ 0.457564] usbcore: registered new interface driver usbfs [ 0.458063] usbcore: registered new interface driver hub [ 0.458879] usbcore: registered new device driver usb [ 0.461441] omap_i2c 44e0b000.i2c: did not get pins for i2c error: -19 [ 0.463319] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.465437] tps65910 0-002d: No interrupt support, no core IRQ [ 0.472111] vrtc: 1800 mV [ 0.472547] vrtc: supplied by vbat [ 0.475632] vio: at 1500 mV [ 0.475778] vio: supplied by vbat [ 0.478599] vdd_mpu: 912 <--> 1312 mV at 1262 mV [ 0.478743] vdd_mpu: supplied by vbat [ 0.482082] vdd_core: 912 <--> 1150 mV at 1137 mV [ 0.482230] vdd_core: supplied by vbat [ 0.484760] vdd3: 5000 mV [ 0.487086] vdig1: at 1800 mV [ 0.487221] vdig1: supplied by vbat [ 0.490215] vdig2: at 1800 mV [ 0.490359] vdig2: supplied by vbat [ 0.492955] vpll: at 1800 mV [ 0.493091] vpll: supplied by vbat [ 0.495657] vdac: at 1800 mV [ 0.496005] vdac: supplied by vbat [ 0.498596] vaux1: at 1800 mV [ 0.498729] vaux1: supplied by vbat [ 0.501589] vaux2: at 3300 mV [ 0.501725] vaux2: supplied by vbat [ 0.504228] vaux33: at 3300 mV [ 0.504358] vaux33: supplied by vbat [ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [ 0.509180] omap_i2c 4802a000.i2c: did not get pins for i2c error: -19 [ 0.510638] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 0.521697] Switching to clocksource gp_timer [ 0.646383] NET: Registered protocol family 2 [ 0.648329] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.648530] TCP bind hash table entries: 2048 (order: 4, 73728 bytes) [ 0.649389] TCP: Hash tables configured (established 2048 bind 2048) [ 0.649630] TCP: reno registered [ 0.649665] UDP hash table entries: 256 (order: 2, 20480 bytes) [ 0.649904] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) [ 0.650752] NET: Registered protocol family 1 [ 0.652407] RPC: Registered named UNIX socket transport module. [ 0.652437] RPC: Registered udp transport module. [ 0.652449] RPC: Registered tcp transport module. [ 0.652461] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.653426] Trying to unpack rootfs image as initramfs... [ 0.655395] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.766995] Freeing initrd memory: 16384K [ 0.767176] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.767767] CPU PMU: probing PMU on CPU 0 [ 0.767810] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 0.925141] VFS: Disk quotas dquot_6.5.2 [ 0.925367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.927965] NFS: Registering the id_resolver key type [ 0.928461] Key type id_resolver registered [ 0.928483] Key type id_legacy registered [ 0.928627] jffs2: version 2.2. (NAND) (SUMMARY) ? 2001-2006 Red Hat, Inc. [ 0.929176] msgmni has been set to 478 [ 0.932770] io scheduler noop registered [ 0.932796] io scheduler deadline registered [ 0.932874] io scheduler cfq registered (default) [ 0.934374] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.938963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.945966] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 0.946590] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 1.721122] console [ttyO0] enabled [ 1.758203] brd: module loaded [ 1.781141] loop: module loaded [ 1.789748] mtdoops: mtd device (mtddev=name/number) must be supplied [ 1.798239] OneNAND driver initializing [ 1.808604] usbcore: registered new interface driver asix [ 1.815144] usbcore: registered new interface driver ax88179_178a [ 1.822040] usbcore: registered new interface driver cdc_ether [ 1.829136] usbcore: registered new interface driver smsc95xx [ 1.835894] usbcore: registered new interface driver net1080 [ 1.842462] usbcore: registered new interface driver cdc_subset [ 1.849138] usbcore: registered new interface driver zaurus [ 1.855643] usbcore: registered new interface driver cdc_ncm [ 1.863976] usbcore: registered new interface driver cdc_wdm [ 1.869979] Initializing USB Mass Storage driver... [ 1.875973] usbcore: registered new interface driver usb-storage [ 1.882443] USB Mass Storage support registered. [ 1.887899] usbcore: registered new interface driver usbtest [ 1.896169] mousedev: PS/2 mouse device common for all mice [ 1.907755] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 1.916762] i2c /dev entries driver [ 1.924135] Driver for 1-wire Dallas network protocol. [ 1.934385] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 1.946490] ledtrig-cpu: registered to indicate activity on CPUs [ 1.954496] usbcore: registered new interface driver usbhid [ 1.960405] usbhid: USB HID core driver [ 1.966224] oprofile: using arm/armv7 [ 1.970946] TCP: cubic registered [ 1.974660] Initializing XFRM netlink socket [ 1.979378] NET: Registered protocol family 17 [ 1.984242] NET: Registered protocol family 15 [ 1.989380] Key type dns_resolver registered [ 1.994118] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 2.002377] ThumbEE CPU extension supported. [ 2.072224] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.078701] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.087773] libphy: 4a101000.mdio: probed [ 2.092038] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 2.101063] Random MACID = ba:43:b8:3c:b7:a4 [ 2.111959] input: volume_keys.7 as /devices/volume_keys.7/input/input0 [ 2.122621] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.135543] RAMDISK: gzip image found at block 0 [ 2.567331] EXT2-fs (ram0): warning: maximal mount count reached, running e2fsck is recommended [ 2.577192] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 2.584487] devtmpfs: mounted [ 2.588238] Freeing init memory: 340K
mount: mounting none on /var/shm failed: No such file or directory
::
:: Enabling hot-plug : [SUCCESS]
::
::
: Populating /dev : [SUCCESS]
[SUCCESS]
::
::
:: Setting PATH
::
: syslogd : [SUCCESS]
: telnetd : [SUCCESS]
Please press Enter to activate this console.
::
:: Setting shell environment ...
::
: Path
: Aliases
: Touch Screen
::
:: Done
::
[root at arago /]#
[root at arago /]#
[root at arago /]# ls -l /dev/m/dev/mem /dev/mice
[root at arago /]# ls -l /dev/m/dev/mem /dev/mice
[root at arago /]# ls -l /dev/m
[root at arago /]#
[root at arago /]#
[root at arago /]#
[root at arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root at arago /]# [root at arago /]# [root at arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
[root at arago /]#
[root at arago /]#
Thanks,
Vaibhav
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
In reply to Matt PorterQuoted 48 lines
-----Original Message-----
From: Hiremath, Vaibhav
Sent: Thursday, March 07, 2013 8:24 PM
To: Porter, Matt
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: RE: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 4 lines
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 9 lines
Quoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 4 lines
Quoted 4 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM KernelList;
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 5 lines · Vaibhav Hiremath
Quoted 5 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap- owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit;Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAPList;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux
Quoted 3 lines
Quoted 3 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC support
<snip>
Quoted 21 lines
I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
[root at arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root at arago /]# [root at arago /]# [root at arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driver
Quoted 4 lines
[root at arago /]#
[root at arago /]#
I have applied below patches from your recent post
[2/2] ARM: dts: add AM33XX MMC support
[1/2] mmc: omap_hsmmc: set max_segs based on dma engine limits [v4,3/3] mmc: davinci: get SG segment limits with dma_get_slave_sg_limits() [v4,2/3] dma: edma: add device_slave_sg_limits() support [v4,1/3] dmaengine: add dma_get_slave_sg_limits()
[v9,9/9] ARM: dts: add AM33XX SPI DMA support
[v9,8/9] spi: omap2-mcspi: add generic DMA request support to the DT binding [v9,7/9] spi: omap2-mcspi: convert to dma_request_slave_channel_compat() [v9,6/9] ARM: dts: add AM33XX EDMA support
[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding [v9,4/9] dmaengine: edma: enable build for AM33XX
[v9,3/9] ARM: edma: add AM33XX support to the private EDMA API [v9,2/9] ARM: edma: remove unused transfer controller handlers [v9,1/9] ARM: davinci: move private EDMA API to arm/common [v3,2/2] mmc: omap_hsmmc: add generic DMA request support to the DT binding [v3,1/2] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
Am I missing anything here?
Thanks,
Vaibhav
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 96 lines · Vaibhav Hiremath
Quoted 48 lines
-----Original Message-----
From: Hiremath, Vaibhav
Sent: Thursday, March 07, 2013 8:24 PM
To: Porter, Matt
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: RE: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter,Matt
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 4 lines
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 9 lines
Quoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter,Matt
Quoted 4 lines
Quoted 4 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit; Tony Lindgren; Russell King; Devicetree Discuss; Linux ARM KernelList;
Quoted 9 lines
Quoted 9 lines
Quoted 9 lines
Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 5 lines · Vaibhav Hiremath
Quoted 5 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap- [email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit;Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAPList;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux
Quoted 3 lines
Quoted 3 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC support<snip>
Quoted 21 lines
I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
[root@arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root@arago /]# [root@arago /]# [root@arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA engine driverQuoted 4 lines
[root@arago /]#
[root@arago /]#I have applied below patches from your recent post
[2/2] ARM: dts: add AM33XX MMC support
[1/2] mmc:omap_hsmmc: setmax_segsbased on dma engine limits [v4,3/3] mmc: davinci: get SG segment limits withdma_get_slave_sg_limits()[v4,2/3] dma: edma: adddevice_slave_sg_limits()support [v4,1/3] dmaengine: adddma_get_slave_sg_limits()
[v9,9/9] ARM: dts: add AM33XX SPI DMA support
[v9,8/9] spi: omap2-mcspi: add generic DMA request support to the DT binding [v9,7/9] spi: omap2-mcspi: convert todma_request_slave_channel_compat()[v9,6/9] ARM: dts: add AM33XX EDMA support
[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding [v9,4/9] dmaengine: edma: enable build for AM33XX
[v9,3/9] ARM: edma: add AM33XX support to the private EDMA API [v9,2/9] ARM: edma: remove unused transfer controller handlers [v9,1/9] ARM: davinci: move private EDMA API to arm/common [v3,2/2] mmc:omap_hsmmc: add generic DMA request support to the DT binding [v3,1/2] mmc:omap_hsmmc: convert todma_request_slave_channel_compat()
Quoted 1 line
Am I missing anything here?
Yes, you missed the
http://www.spinics.net/lists/arm-kernel/msg227886.html dependency mentioned first in the cover letter.
-Matt
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 122 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 8:34 PM
To: Hiremath, Vaibhav
Cc: Chris Ball; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Linux OMAP List; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 6 lines · Vaibhav Hiremath
Quoted 6 lines
-----Original Message-----
From: Hiremath, Vaibhav
Sent: Thursday, March 07, 2013 8:24 PM
To: Porter, Matt
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 11 lines
Quoted 11 lines
ARM Kernel List
Subject: RE: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf OfPorter,
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Matt
Quoted 3 lines
Quoted 3 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit;Tony
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel
List;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportOn Thu, Mar 07, 2013 at 05:29:24AM +0000, Vaibhav Hiremath
Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson,Benoit;
Quoted 16 lines
Quoted 8 lines
Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAPList;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux
Quoted 3 lines
Quoted 3 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC support<snip>
Quoted 7 lines
I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
Quoted 12 lines
Quoted 12 lines
[root at arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root at arago /]# [root at arago /]# [root at arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMAengine
Quoted 2 lines
Quoted 2 lines
driver
[ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA enginedriver
Quoted 10 lines
Quoted 4 lines
[root at arago /]#
[root at arago /]#I have applied below patches from your recent post
[2/2] ARM: dts: add AM33XX MMC support
[1/2] mmc:omap_hsmmc: setmax_segsbased on dma engine limits [v4,3/3] mmc: davinci: get SG segment limits with
dma_get_slave_sg_limits()Quoted 4 lines
[v4,2/3] dma: edma: add
device_slave_sg_limits()support [v4,1/3] dmaengine: adddma_get_slave_sg_limits()[v9,9/9] ARM: dts: add AM33XX SPI DMA support
[v9,8/9] spi: omap2-mcspi: add generic DMA request support to the DTbinding
Quoted 1 line
[v9,7/9] spi: omap2-mcspi: convert to
dma_request_slave_channel_compat()Quoted 7 lines
[v9,6/9] ARM: dts: add AM33XX EDMA support
[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding [v9,4/9] dmaengine: edma: enable build for AM33XX [v9,3/9] ARM: edma: add AM33XX support to the private EDMA API [v9,2/9] ARM: edma: remove unused transfer controller handlers [v9,1/9] ARM: davinci: move private EDMA API to arm/common [v3,2/2] mmc:omap_hsmmc: add generic DMA request support to the DTbinding
Quoted 1 line
[v3,1/2] mmc:
omap_hsmmc: convert to
dma_request_slave_channel_compat()Quoted 3 lines
Quoted 6 lines
Quoted 1 line
Am I missing anything here?
Yes, you missed the
http://www.spinics.net/lists/arm-kernel/msg227886.html dependency mentioned first in the cover letter.
Matt, I manually edited the file with above patch and result is still the same. Can you point me to branch where you have tested MMC code?
arch/arm/common/edma.c +3 -0
@@ -730,6 +730,9 @@ EXPORT_SYMBOL(edma_free_channel);*/ int edma_alloc_slot (unsigned ctlr,int slot) { +if (!edma_cc[ctlr]) +return -EINVAL ; +if (slot >=0 ) slot =EDMA_CHAN_SLOT (slot);
Thanks,
Vaibhav
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 124 lines · Vaibhav Hiremath
Quoted 124 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 8:34 PM
To: Hiremath, Vaibhav
Cc: Chris Ball; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Linux OMAP List; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 6 lines · Vaibhav Hiremath
Quoted 6 lines
-----Original Message-----
From: Hiremath, Vaibhav
Sent: Thursday, March 07, 2013 8:24 PM
To: Porter, Matt
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 11 lines
Quoted 11 lines
ARM Kernel List
Subject: RE: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf Of Porter,Matt
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:[email protected]] On Behalf OfPorter,
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Matt
Quoted 3 lines
Quoted 3 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson, Benoit;Tony
Quoted 6 lines
Quoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Lindgren; Russell King; Devicetree Discuss; Linux ARM Kernel
List;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux OMAP List; Linux Kernel Mailing List; Linux MMC List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportOn Thu, Mar 07, 2013 at 05:29:24AM +0000, Vaibhav Hiremath
Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-----Original Message-----
From: [email protected] [mailto:linux-omap-
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
[email protected]] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson,Benoit;
Quoted 16 lines
Quoted 8 lines
Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; Linux OMAPList;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux
Quoted 3 lines
Quoted 3 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC support<snip>
Quoted 7 lines
I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
Quoted 12 lines
Quoted 12 lines
[root@arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root@arago /]# [root@arago /]# [root@arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMAengine
Quoted 2 lines
Quoted 2 lines
driver
[ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA enginedriver
Quoted 10 lines
Quoted 4 lines
[root@arago /]#
[root@arago /]#I have applied below patches from your recent post
[2/2] ARM: dts: add AM33XX MMC support
[1/2] mmc:omap_hsmmc: setmax_segsbased on dma engine limits [v4,3/3] mmc: davinci: get SG segment limits with
dma_get_slave_sg_limits()Quoted 4 lines
[v4,2/3] dma: edma: add
device_slave_sg_limits()support [v4,1/3] dmaengine: adddma_get_slave_sg_limits()[v9,9/9] ARM: dts: add AM33XX SPI DMA support
[v9,8/9] spi: omap2-mcspi: add generic DMA request support to the DTbinding
Quoted 1 line
[v9,7/9] spi: omap2-mcspi: convert to
dma_request_slave_channel_compat()Quoted 7 lines
[v9,6/9] ARM: dts: add AM33XX EDMA support
[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding [v9,4/9] dmaengine: edma: enable build for AM33XX [v9,3/9] ARM: edma: add AM33XX support to the private EDMA API [v9,2/9] ARM: edma: remove unused transfer controller handlers [v9,1/9] ARM: davinci: move private EDMA API to arm/common [v3,2/2] mmc:omap_hsmmc: add generic DMA request support to the DTbinding
Quoted 1 line
[v3,1/2] mmc:
omap_hsmmc: convert to
dma_request_slave_channel_compat()Quoted 4 lines
Am I missing anything here?
Quoted 7 lines
Quoted 4 lines
Yes, you missed the
http://www.spinics.net/lists/arm-kernel/msg227886.html dependency mentioned first in the cover letter.Matt, I manually edited the file with above patch and result is still the same. Can you point me to branch where you have tested MMC code?
git://github.com/ohporter/linux.git edma-dmaengine-am33xx-mmc-v1
omap2plus_defconfig + CONFIG_TI_EDMA
I just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power up to reverify.
-Matt
Quoted 20 lines
arch/arm/common/edma.c +3
-0@@ -730,6 +730,9 @@ EXPORT_SYMBOL(edma_free_channel);*/ int edma_alloc_slot (unsigned ctlr,int slot) { +if (!edma_cc[ctlr]) +return -EINVAL ; +if (slot >=0 ) slot =EDMA_CHAN_SLOT (slot);Thanks,
Vaibhav
_______________________________________________
devicetree-discuss mailing list
[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
RE: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 156 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:33 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball; Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 3 lines · Vaibhav Hiremath
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf Of Porter,Matt
Quoted 4 lines
Quoted 4 lines
Sent: Thursday, March 07, 2013 8:34 PM
To: Hiremath, Vaibhav
Cc: Chris Ball; Russell King; Krishnamoorthy, Balaji T; Devicetree Discuss; Linux MMC List; Linux Kernel Mailing List; Linux OMAPList;
Quoted 10 lines
Quoted 10 lines
Linux ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 6 lines · Vaibhav Hiremath
Quoted 6 lines
-----Original Message-----
From: Hiremath, Vaibhav
Sent: Thursday, March 07, 2013 8:24 PM
To: Porter, Matt
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Quoted 8 lines
Quoted 8 lines
Devicetree
Quoted 1 line
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris Ball;
Linux
Quoted 5 lines
Quoted 5 lines
ARM Kernel List
Subject: RE: [PATCH 2/2] ARM: dts: add AM33XX MMC supportQuoted 2 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf OfPorter,
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Matt
Quoted 3 lines
Sent: Thursday, March 07, 2013 8:17 PM
To: Hiremath, Vaibhav
Cc: Linux OMAP List; Russell King; Krishnamoorthy, Balaji T;Devicetree
Quoted 1 line
Discuss; Linux MMC List; Linux Kernel Mailing List; Chris
Ball;
Quoted 5 lines
Quoted 5 lines
Linux
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
ARM Kernel List
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC supportOn Thu, Mar 07, 2013 at 02:39:55PM +0000, Vaibhav Hiremath
Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
-----Original Message-----
From: Matt Porter [mailto:ohiomdp at gmail.com] On Behalf OfPorter,
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Matt
Quoted 3 lines
Quoted 3 lines
Sent: Thursday, March 07, 2013 7:43 PM
To: Hiremath, Vaibhav
Cc: Krishnamoorthy, Balaji T; Chris Ball; Cousson,Benoit;
Quoted 2 lines
Quoted 2 lines
Tony
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Lindgren; Russell King; Devicetree Discuss; Linux ARM
Kernel
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
List;
Quoted 1 line
Quoted 1 line
Quoted 1 line
Linux OMAP List; Linux Kernel Mailing List; Linux MMC
List
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Subject: Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
On Thu, Mar 07, 2013 at 05:29:24AM +0000, Vaibhav
Hiremath
Quoted 11 lines
Quoted 11 lines
Quoted 2 lines · wrote:
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-----Original Message-----
From: linux-omap-owner at vger.kernel.org [mailto:linux-omap-
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
owner at vger.kernel.org] On Behalf Of Porter, Matt
Sent: Thursday, March 07, 2013 9:47 AM
To: Krishnamoorthy, Balaji T; Chris Ball; Cousson,Benoit;
Quoted 3 lines
Quoted 3 lines
Tony
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Lindgren; Russell King
Cc: Devicetree Discuss; Linux ARM Kernel List; LinuxOMAP
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
Quoted 5 lines
List;
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Linux
Quoted 3 lines
Quoted 3 lines
Kernel Mailing List; Linux MMC List
Subject: [PATCH 2/2] ARM: dts: add AM33XX MMC support<snip>
Quoted 7 lines
I believe you meant "
CONFIG_TI_EDMA" right?Yes, I just enabled it and the result is still same.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
[root at arago /]# dmesg | grep -ir mmc
[ 0.506844] vmmc: 1800 <--> 3300 mV at 3300 mV [ 0.506970] vmmc: supplied by vbat [root at arago /]# [root at arago /]# [root at arago /]# dmesg | grep -ir dma [ 0.217063] DMA: preallocated 256 KiB pool for atomiccoherent
Quoted 16 lines
Quoted 16 lines
Quoted 5 lines
Quoted 5 lines
allocations
[ 0.236321] platform 49000000.edma: alias fck already exists [ 0.236360] platform 49000000.edma: alias fck already exists [ 0.236381] platform 49000000.edma: alias fck already exists [ 0.370705] edma-dma-engine edma-dma-engine.0: TI EDMA DMAengine
Quoted 2 lines
Quoted 2 lines
driver
[ 0.445156] omap-dma-engine omap-dma-engine: OMAP DMA enginedriver
Quoted 7 lines
Quoted 4 lines
[root at arago /]#
[root at arago /]#I have applied below patches from your recent post
Quoted 8 lines
Quoted 8 lines
Quoted 3 lines
[2/2] ARM: dts: add AM33XX MMC support
[1/2] mmc:omap_hsmmc: setmax_segsbased on dma engine limits [v4,3/3] mmc: davinci: get SG segment limits with
dma_get_slave_sg_limits()Quoted 4 lines
[v4,2/3] dma: edma: add
device_slave_sg_limits()support [v4,1/3] dmaengine: adddma_get_slave_sg_limits()[v9,9/9] ARM: dts: add AM33XX SPI DMA support
[v9,8/9] spi: omap2-mcspi: add generic DMA request support to theDT
Quoted 10 lines
Quoted 10 lines
binding
Quoted 1 line
[v9,7/9] spi: omap2-mcspi: convert to
dma_request_slave_channel_compat()Quoted 7 lines
[v9,6/9] ARM: dts: add AM33XX EDMA support
[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding [v9,4/9] dmaengine: edma: enable build for AM33XX [v9,3/9] ARM: edma: add AM33XX support to the private EDMA API [v9,2/9] ARM: edma: remove unused transfer controller handlers [v9,1/9] ARM: davinci: move private EDMA API to arm/common [v3,2/2] mmc:omap_hsmmc: add generic DMA request support to theDT
Quoted 6 lines
Quoted 6 lines
binding
Quoted 1 line
[v3,1/2] mmc:
omap_hsmmc: convert to
dma_request_slave_channel_compat()Quoted 3 lines
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Am I missing anything here?
Yes, you missed the
http://www.spinics.net/lists/arm-kernel/msg227886.html dependency mentioned first in the cover letter.Matt, I manually edited the file with above patch and result is still
the same.
Quoted 1 line
Can you point me to branch where you have tested MMC code?
Quoted 8 lines
git://github.com/ohporter/linux.gitedma-dmaengine-am33xx-mmc-v1
omap2plus_defconfig+CONFIG_TI_EDMAI just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power up to reverify.
Matt,
Your branch is working for me, I tested it on EVM. Not sure what is wrong with manual rebasing I did yesterday. I will try to nail-down root-cause here.
And you can submit the next version fixing the comments I have given.
Thanks,
Vaibhav
Joel A Fernandes
Tested-byRe: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Hi Tony, Vaibhav,
Quoted 11 lines
Quoted 4 lines
I just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power up to reverify.
Matt,
Your branch is working for me, I tested it on EVM. Not sure what is wrong with manual rebasing I did yesterday. I will try to nail-down root-cause here.
And you can submit the next version fixing the comments I have given.
The only comment I could find in the whole discussion was adding of the interrupts property. I tested I don't have any problem booting with Matt's patch, without having the interrupts property.
Can this patch be pulled in for 3.11?
Thanks,
Joel
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Hi,
Quoted 9 lines · Joel A Fernandes
Hi Tony, Vaibhav,
Quoted 7 lines
Quoted 4 lines
I just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power up to reverify.
Matt,
Quoted 8 lines
Quoted 4 lines
Your branch is working for me, I tested it on EVM. Not sure what is wrong with manual rebasing I did yesterday. I will try to nail-down root-cause here.
And you can submit the next version fixing the comments I have given.
The only comment I could find in the whole discussion was adding of the interrupts property. I tested I don't have any problem booting with Matt's patch, without having the interrupts property.
might very well be, but we want to figure out why adding "intrrupts" causes issues. Why does it have to come through hwmod ? You might have uncovered a real problem which needs fixing. Besides, at the end of the day, we want to remove the redundant hwmod data if we already have DTS bindings covering the same requirements.
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130615/a214085e/attachment.sig>
A message that is not in the archive (sent off-list or not yet received): 20130614222537.GA25428-S8G//mZuvNWo5Im9Ml3/[email protected]
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Felipe,
Quoted 19 lines · Felipe Balbi
Hi,
Quoted 4 lines · Joel A Fernandes
Hi Tony, Vaibhav,
Quoted 2 lines
Quoted 2 lines
I just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power
up
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
to reverify.
Matt,
Your branch is working for me, I tested it on EVM. Not sure what is
wrong with manual rebasing
Quoted 4 lines
Quoted 3 lines
I did yesterday. I will try to nail-down root-cause here.
And you can submit the next version fixing the comments I have given.
Quoted 7 lines
Quoted 3 lines
The only comment I could find in the whole discussion was adding of the interrupts property. I tested I don't have any problem booting with Matt's patch, without having the interrupts property.
might very well be, but we want to figure out why adding "intrrupts" causes issues. Why does it have to come through hwmod ? You might have uncovered a real problem which needs fixing. Besides, at the end of the
No actually I think I wasn't very descriptive in my post. There is no problem here. Whether it comes from DT or not, it works in both cases . (I haven't tried adding interrupt node to dts but what I gathered from Vaibhav's post is that it works also when added to dts)
But I can revisit Vaibhav's suggestion of adding it to dts for completeness sake. My tree currently works and picks up the interrupt info from hwmod. I just didn't see any activity on this thread for a while so I thought of enquiring it was ok to pull it in for the 3.11 merge window or if the consensus was that interrupt node be added to dts even though it works without it.
Thanks,
-Joel
Quoted 5 lines
day, we want to remove the redundant hwmod data if we already have DTS bindings covering the same requirements.
--
balbi
_______________________________________________
devicetree-discuss mailing list devicetree-discuss-uLR06cmDAlY/[email protected]
https://lists.ozlabs.org/listinfo/devicetree-discuss
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Hi Felipe,
Quoted 33 lines · Joel A Fernandes
Felipe,
Quoted 28 lines · Felipe Balbi
Hi,
Quoted 15 lines · Joel A Fernandes
Hi Tony, Vaibhav,
Quoted 13 lines
Quoted 6 lines
I just doublechecked MMC rootfs on bone and evmsk as it's the standard
smoke test. My EVM is intermittent now so trying to coax it to power up
to reverify.Matt,
Your branch is working for me, I tested it on EVM. Not sure what is wrong with manual rebasing
I did yesterday. I will try to nail-down root-cause here.Quoted 5 lines
Quoted 1 line
And you can submit the next version fixing the comments I have given.
The only comment I could find in the whole discussion was adding of the interrupts property. I tested I don't have any problem booting with Matt's patch, without having the interrupts property.
might very well be, but we want to figure out why adding "intrrupts" causes issues. Why does it have to come through hwmod ? You might have uncovered a real problem which needs fixing. Besides, at the end of the
You are right, adding interrupts property to DT node causes problems (driver probe doesn't take place). Will debug further on Monday.
Thanks,
Joel
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
In reply to Joel A FernandesHi,
Quoted 28 lines · Joel A Fernandes
Quoted 14 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
I just doublechecked MMC rootfs on bone and evmsk as it's the standard smoke test. My EVM is intermittent now so trying to coax it to power
up
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
to reverify.
Matt,
Your branch is working for me, I tested it on EVM. Not sure what is
wrong with manual rebasing
Quoted 4 lines
Quoted 3 lines
I did yesterday. I will try to nail-down root-cause here.
And you can submit the next version fixing the comments I have given.
Quoted 7 lines
Quoted 3 lines
The only comment I could find in the whole discussion was adding of the interrupts property. I tested I don't have any problem booting with Matt's patch, without having the interrupts property.
might very well be, but we want to figure out why adding "intrrupts" causes issues. Why does it have to come through hwmod ? You might have uncovered a real problem which needs fixing. Besides, at the end of the
No actually I think I wasn't very descriptive in my post. There is no problem here. Whether it comes from DT or not, it works in both cases . (I haven't tried adding interrupt node to dts but what I gathered from Vaibhav's post is that it works also when added to dts)
Quoted 6 lines
But I can revisit Vaibhav's suggestion of adding it to dts for completeness sake. My tree currently works and picks up the interrupt info from hwmod. I just didn't see any activity on this thread for a while so I thought of enquiring it was ok to pull it in for the 3.11 merge window or if the consensus was that interrupt node be added to dts even though it works without it.
fair enough, then let's just add those interrupts to hwmod which will, eventually, let us drop all of that data from hwmod.
cheers
Signature · 8 lines
balbi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130615/470afe0b/attachment.sig>
Re: [PATCH 2/2] ARM: dts: add AM33XX MMC support
Quoted 3 lines · Felipe Balbi
fair enough, then let's just add those interrupts to hwmod which will, eventually, let us drop all of that data from hwmod.
Nope, we're already dropping the duplicate data from hwmod for am33xx and omap4. See omap-for-v3.11/cleanup branch.
Regards,
Tony